Multicomponent aerosol particle deposition in a realistic cast of the human upper respiratory tract

Abstract Inhalation of aerosols generated by electronic cigarettes leads to deposition of multiple chemical compounds in the human airways. In this work, an experimental method to determine regional deposition of multicomponent aerosols in an in vitro segmented, realistic human lung geometry was developed and applied to two aerosols, i.e. a monodisperse glycerol aerosol and a multicomponent aerosol. The method comprised the following steps: (1) lung cast model preparation, (2) aerosol generation and exposure, (3) extraction of deposited mass, (4) chemical quantification and (5) data processing. The method showed good agreement with literature data for the deposition efficiency when using a monodisperse glycerol aerosol, with a mass median aerodynamic diameter (MMAD) of 2.3 μm and a constant flow rate of 15 L/min. The highest deposition surface density rate was observed in the bifurcation segments, indicating inertial impaction deposition. The experimental method was also applied to the deposition of a nebulized multicomponent aerosol with a MMAD of 0.50 μm and a constant flow rate of 15 L/min. The deposited amounts of glycerol, propylene glycol and nicotine were quantified. The three analyzed compounds showed similar deposition patterns and fractions as for the monodisperse glycerol aerosol, indicating that the compounds most likely deposited as parts of the same droplets. The developed method can be used to determine regional deposition for multicomponent aerosols, provided that the compounds are of low volatility. The generated data can be used to validate aerosol deposition simulations and to gain insight in deposition of electronic cigarette aerosols in human airways.

[1]  Andres Kriete,et al.  A digital reference model of the human bronchial tree. , 2004, Computerized medical imaging and graphics : the official journal of the Computerized Medical Imaging Society.

[2]  Yung-sung Cheng,et al.  Particle Deposition in a Cast of Human Tracheobronchial Airways , 2005 .

[3]  David Ghosh,et al.  An Improved Cambridge Filter Pad Extraction Methodology to Obtain More Accurate Water and “Tar” Values: In Situ Cambridge Filter Pad Extraction Methodology , 2014 .

[4]  M. Peitsch,et al.  Human bronchial epithelial cells exposed in vitro to cigarette smoke at the air-liquid interface resemble bronchial epithelium from human smokers. , 2013, American journal of physiology. Lung cellular and molecular physiology.

[5]  D. Grainger,et al.  Nanoparticles in the Lung , 2010 .

[6]  Bas J Blaauboer,et al.  Regulatory acceptance and use of 3R models: a multilevel perspective. , 2012, ALTEX.

[7]  W. Finlay,et al.  Regional aerosol deposition and flow measurements in an idealized mouth and throat , 2004 .

[8]  Anthony J. Hickey,et al.  Inhalation Aerosols , 2019 .

[9]  Warren H. Finlay,et al.  Particle deposition measurements and numerical simulation in a highly idealized mouth-throat , 2004 .

[10]  J. Olfert,et al.  Effect of electrostatic charge on deposition of uniformly charged monodisperse particles in the nasal extrathoracic airways of an infant. , 2015, Journal of aerosol medicine and pulmonary drug delivery.

[11]  Manuel C. Peitsch,et al.  In vitro systems toxicology approach to investigate the effects of repeated cigarette smoke exposure on human buccal and gingival organotypic epithelial tissue cultures , 2014, Toxicology mechanisms and methods.

[12]  Thomas Heistracher,et al.  Local particle deposition patterns may play a key role in the development of lung cancer. , 2003, Journal of applied physiology.

[13]  Miroslav Jicha,et al.  Numerical investigation of inspiratory airflow in a realistic model of the human tracheobronchial airways and a comparison with experimental results , 2016, Biomechanics and modeling in mechanobiology.

[14]  W. Finlay,et al.  An In vitro Study on the Deposition of Micrometer-Sized Particles in the Extrathoracic Airways of Adults During Tidal Oral Breathing , 2013, Annals of Biomedical Engineering.

[15]  C. Roth,et al.  Deposition of fine and ultrafine aerosol particles during exposure at the air/cell interface , 2002 .

[16]  Miroslav Jicha,et al.  A method for in vitro regional aerosol deposition measurement in a model of the human tracheobronchial tree by the positron emission tomography , 2015, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[17]  P Worth Longest,et al.  In Silico Models of Aerosol Delivery to the Respiratory Tract — Development and Applications ☆ Advanced Drug Delivery Reviews , 2022 .

[18]  A. Wexler,et al.  Imaging extra-thoracic airways and deposited particles in laboratory animals , 2012 .

[19]  M. L. Laucks,et al.  Aerosol Technology Properties, Behavior, and Measurement of Airborne Particles , 2000 .

[20]  Yung Sung Cheng,et al.  Aerosol Deposition in the Extrathoracic Region , 2003, Aerosol science and technology : the journal of the American Association for Aerosol Research.

[21]  F. Lízal,et al.  Comparison of methods for evaluation of aerosol deposition in the model of human lungs , 2014 .

[22]  M Lippmann,et al.  Experimental measurements and empirical modelling of the regional deposition of inhaled particles in humans. , 1980, American Industrial Hygiene Association journal.

[23]  W. Finlay,et al.  In vitro intersubject and intrasubject deposition measurements in realistic mouth-throat geometries , 2004 .

[24]  Miroslav Jicha,et al.  Development of a realistic human airway model , 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[25]  Bean T. Chen,et al.  Particle Deposition in a Cast of Human Oral Airways , 1999 .

[26]  L. Gradon,et al.  Dynamics of Oropharyngeal Aerosol Transport and Deposition With the Realistic Flow Pattern , 2006, Inhalation toxicology.

[27]  C. Meredith,et al.  Development of an in vitro cytotoxicity model for aerosol exposure using 3D reconstructed human airway tissue; application for assessment of e-cigarette aerosol. , 2015, Toxicology in vitro : an international journal published in association with BIBRA.

[28]  Gerhard Kasper,et al.  In-vitro cell exposure studies for the assessment of nanoparticle toxicity in the lung - A dialog between aerosol science and biology , 2011 .

[29]  Manuel C. Peitsch,et al.  Systems Approaches Evaluating the Perturbation of Xenobiotic Metabolism in Response to Cigarette Smoke Exposure in Nasal and Bronchial Tissues , 2013, BioMed research international.

[30]  T. Leisner,et al.  Modelling and measurement of particle deposition for cell exposure at the air–liquid interface , 2013 .