High voltage automotive EMC component measurements using an artificial network

This paper investigates the adaptation of the standard 12V automotive conducted emissions component EMC measurement method, as defined in CISPR 25, to the ever increasing high voltage automotive components seen in hybrid electric, fuel cell, and the alike vehicles. Due to significantly higher voltages and currents and variations in shielding strategies, conventional automotive measurement methods do not always produce vehicle representative results. Experimental and simulation results are presented which show that artificial networks, as defined in CISPR 25, should not be used for validation of high voltage automotive components in either conducted voltage or current measurements.

[1]  R. Strzelecki,et al.  The influence of passive EMI filters on various aspects of electromagnetic compatibility of ASD's , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[2]  Jody J. Nelson,et al.  HEV system EMC investigation during transient operations , 2007, 2007 18th International Zurich Symposium on Electromagnetic Compatibility.

[3]  P. Pozzobon,et al.  Proposal of an artificial traction line network for the measurement of locomotive conducted emissions , 2003, 2003 IEEE International Symposium on Electromagnetic Compatibility, 2003. EMC '03..

[4]  G. Ala,et al.  FDTD simulation for electromagnetic radiated emissions in 42 V vehicle electrical systems , 2005, 2005 IEEE Vehicle Power and Propulsion Conference.

[5]  Definition and acquisition of CM and DM EMI noise for general-purpose adjustable speed motor drives , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[6]  R. Bausiere,et al.  High-Frequency Modeling of an Adjustable Speed Drive , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[7]  У Отт Генри,et al.  Методы подавления шумов и помех в электронных системах. (Noise reduction techniques in electronic systems) , 1979 .

[8]  Christos Christopoulos,et al.  Introduction to Electromagnetic Compatibility , 2007 .

[9]  C. Paul.  Introduction to Electromagnetic Compatibility: Paul/Introduction to Electromagnetic Compatibility, Second Edition , 2005 .

[10]  M.C. Di Piazza,et al.  Conducted and radiated emissions in distributed automotive dual voltage vehicle electrical systems , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[11]  D. Cheng.  Field and wave electromagnetics , 1983 .

[12]  M. Alakula,et al.  Automotive power electronic future-from an EMC perspective , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[13]  Shin Yamamoto,et al.  RF Conducted noise measurements of automotive electrical and electronic devices using artificial network , 1983, IEEE Transactions on Vehicular Technology.

[14]  Deepak Divan,et al.  Conductive electromagnetic interference (EMI) noise evaluation for an actively clamped resonant DC link inverter (ACRDCLI) for electric vehicle (EV) traction drive applications , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[15]  J. Roudet,et al.  EMI study of a three phase inverter-fed motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..