Solar coolfacades: Framework for the integration of solar cooling technologies in the building envelope

Solar cooling systems have gained increased attention these last years, for its potential to lower indoor temperatures using renewable energy. However, architectural integration of these systems in buildings has not been fully explored. Current developments such as small scale solar driven heat pumps and solar cooling kits commercially available for application raise questions about how to successfully integrate these systems into buildings, while present interesting opportunities for the development of new performance based facade components or even self-sustaining cooling facade modules for high-performing commercial buildings. The present paper seeks to discuss current possibilities for facade integration of solar cooling systems, generating a framework for the understanding and further development of solar cooling facade systems. The proposed framework was made by means of a review of solar cooling technologies and solar cooling facade concepts found in the literature. The outcomes of this study are a matrix outlining the possibilities for the integration of several components and subsystems from the entire cooling process (cooling generation, distribution and delivery), and an assessment of the development level of state-of-the-art experiences within the field considering examples from current research projects and working prototypes, for the development of solar cooling integrated facade concepts.

[1]  Ulrich Knaack,et al.  25 Years of cooling research in office buildings: Review for the integration of cooling strategies into the building façade (1990–2014) , 2017 .

[2]  Ling Zhang,et al.  Review of solar thermoelectric cooling technologies for use in zero energy buildings , 2015 .

[3]  Marco Beccali,et al.  Second Generation of Freescoo Solar DEC Prototypes for Residential Applications , 2015 .

[4]  Maria Cristina Munari Probst,et al.  Towards an improved architectural quality of building integrated solar thermal systems (BIST) , 2007 .

[5]  S. Szokolay,et al.  Introduction to Architectural Science: The Basis of Sustainable Design , 2004 .

[6]  Clemens Pollerberg,et al.  Solar driven steam jet ejector chiller , 2009 .

[7]  B. Orel,et al.  Selective paint coatings for coloured solar absorbers: Polyurethane thickness insensitive spectrally selective (TISS) paints (Part II) , 2007 .

[8]  Lin Lu,et al.  Energy performance of solar-assisted liquid desiccant air-conditioning system for commercial building in main climate zones , 2014 .

[9]  Jose Manuel Cejudo-Lopez,et al.  A new desiccant channel to be integrated in building façades , 2015 .

[10]  K. F. Fong,et al.  Comparative study of different solar cooling systems for buildings in subtropical city , 2010 .

[11]  Achille Messac,et al.  Design of thermoelectric heat pump unit for active building envelope systems , 2005 .

[12]  Lei Wang,et al.  Solar air conditioning in Europe--an overview , 2007 .

[13]  Elias K. Stefanakos,et al.  A review of solar thermo-mechanical refrigeration and cooling methods , 2015 .

[14]  Ulrich Knaack,et al.  Solar façades - Main barriers for widespread façade integration of solar technologies , 2017 .

[15]  Paul Kohlenbach,et al.  Solar Cooling: The Earthscan Expert Guide to Solar Cooling Systems , 2014 .

[16]  Stephen Selkowitz,et al.  High-performance commercial building facades , 2002 .

[17]  Maria Cristina Munari Probst,et al.  Architectural integration of solar thermal collectors: results of a European survey , 2005 .

[18]  Norbert Lechner,et al.  Heating, Cooling, Lighting: Sustainable Design Methods for Architects , 2008 .

[19]  Stephen Selkowitz.  Integrating advanced facades into high performance buildings , 2001 .

[20]  Theocharis Tsoutsos,et al.  Assessment of fixed shading devices with integrated PV for efficient energy use , 2012 .

[21]  Armando C. Oliveira,et al.  Evaluation of a solar thermal system using building louvre shading devices , 2006 .

[22]  Gerrit Füldner,et al.  Integration of Sorption Modules in Sydney Type Vacuum Tube Collector with Air as Heat Transfer Fluid , 2015 .

[23]  Shan K. Wang,et al.  Handbook of Air Conditioning and Refrigeration , 1993 .

[24]  Peter Schossig,et al.  On Standardizing Solar Cooling – Field Test in the Small Capacity Range , 2014 .

[25]  Klaus Daniels.  Advanced Building Systems: A Technical Guide for Architects and Engineers , 2003 .

[26]  Christoph Maurer,et al.  First Measurement Results of a Pilot Building with Transparent Façade Collectors , 2014 .

[27]  Ioan Sarbu,et al.  Review of solar refrigeration and cooling systems , 2013 .

[28]  Karin Kappel,et al.  Achieving Solar Energy in Architecture-IEA SHC Task 41 , 2012 .

[29]  Anna Chiari,et al.  On the performances of a hybrid air-conditioning system in different climatic conditions , 2011 .

[30]  Roland Krippner,et al.  Facade Construction Manual , 2008 .

[31]  Carey J. Simonson,et al.  Performance analysis of a membrane liquid desiccant air-conditioning system , 2013 .

[32]  Christophe Ballif,et al.  When PV modules are becoming real building elements: White solar module, a revolution for BIPV , 2015, PVSC 2015.

[33]  Francesco Frontini,et al.  A New Angle Selective See Thorough BIPV Façade for Solar Control , 2010 .

[34]  Todd Otanicar,et al.  Prospects for solar cooling – An economic and environmental assessment , 2012 .

[35]  T. Auer,et al.  Facades: Principles of Construction , 2014 .

[36]  César Martín-Gómez,et al.  Theoretical Design of an Active Façade System with Peltier Cells , 2014 .

[37]  Piotr A. Domanski,et al.  Review of alternative cooling technologies , 2013 .

[38]  Tuan Ngo,et al.  Technical feasibility of a façade integrated solar cooling system for commercial buildings , 2012 .

[39]  Danny H.W. Li,et al.  Energy and cost analysis of semi-transparent photovoltaic in office buildings , 2009 .

[40]  Reyner Banham,et al.  Architecture of the Well-Tempered Environment , 1969 .

[41]  Saffa Riffat,et al.  Solar facade for space cooling , 2012 .

[42]  Roberto Fedrizzi,et al.  Integration of Sorption Collector in Office Curtain Wall: Simulation Based Comparison of Different System Configurations , 2015 .

[43]  Jean-Louis Scartezzini,et al.  Sol-gel deposition and optical characterization of multilayered SiO2/Ti1-xSixO2 coatings on solar collector glasses , 2006 .

[44]  W. Streefkerk,et al.  Stirling Solar cooling in office façades , 2011 .

[45]  Tillmann Klein,et al.  Integral Facade Construction: Towards a new product architecture for curtain walls , 2013 .

[46]  Hans-Martin Henning,et al.  Solar assisted air conditioning of buildings – an overview , 2004 .

[47]  Jens Pfafferott,et al.  Thermal Comfort and Energy-Efficient Cooling of Nonresidential Buildings , 2014 .

[48]  Xu Xu,et al.  Study of the performance of thermoelectric modules for use in active building envelopes , 2007 .

[49]  Global Energy Assessment Writing Team.  Global Energy Assessment: Toward a Sustainable Future , 2012 .

[50]  Chris L. Ward,et al.  Performance of a combined organic Rankine cycle and vapor compression cycle for heat activated cooli , 2011 .

[51]  Xu Xu,et al.  Evaluation of a prototype active building envelope window-system , 2008 .

[52]  H. Manz,et al.  Available remodeling simulation for a BIPV as a shading device , 2011 .

[53]  Arif Hepbasli,et al.  Low exergy (LowEx) heating and cooling systems for sustainable buildings and societies , 2012 .

[54]  César Martín-Gómez,et al.  Development and construction of a thermoelectric active facade module , 2015 .

[55]  Tao Zhang,et al.  Experimental analysis of an internally-cooled liquid desiccant dehumidifier , 2013 .

[56]  Ling Zhang,et al.  Experimental evaluation of an active solar thermoelectric radiant wall system , 2015 .

[57]  Xu Xu,et al.  Evaluation of an Active Building Envelope window-system , 2008 .

[58]  Hongxing Yang,et al.  Study on thermal performance of semi-transparent building-integrated photovoltaic glazings , 2008 .

[59]  Gerrit Füldner,et al.  Development of collector integrated sorption modules for solar heating and cooling: performance simulation , 2014 .