Improved Lead—acid Cells Employing Tin Oxide Coated Dynel Fibres with Positive Active-Material

[1]  A. Shukla,et al.  A Low-Cost, High Energy-Density Lead/Acid Battery , 2004 .

[2]  M. Iwata,et al.  Development of positive electrodes with an SnO2 coating by applying a sputtering technique for lead-acid batteries , 2001 .

[3]  J. E. Manders,et al.  Capacity and cycle-life of batteries using bismuth-bearing oxide , 1999 .

[4]  C. Cha,et al.  Influence of perfluorinated surfactants on the positive active-material of lead/acid batteries , 1998 .

[5]  N. E. Bagshaw.  Improving active-material utilization , 1997 .

[6]  Detchko Pavlov,et al.  Influence of cycling on the nature of the positive active mass of lead/acid batteries and effect of CaSO4 on the behaviour of the positive plates , 1997 .

[7]  P. T. Moseley,et al.  Positive plate additives , 1997 .

[8]  K. McGregor,et al.  Active-material additives for high-rate lead/acid batteries: have there been any positive advances? , 1996 .

[9]  W. Badawy,et al.  Improvement of the performance of the positive electrode in the lead/acid battery by addition of boric acid , 1995 .

[10]  G. Yin,et al.  Effects of additives on the discharge behaviour of positive electrodes in lead/acid batteries , 1995 .

[11]  B. Szcześniak,et al.  Performance of valve-regulated lead/acid test cells for float operation using modified positive active materials , 1995 .

[12]  W. Kao,et al.  Barium Metaplumbate for Lead/Acid Batteries , 1994 .

[13]  Guo Wei,et al.  Electrochemical behaviour of lead electrode in sulfuric acid solution containing citric acid , 1994 .

[14]  Guo Wei,et al.  Electrochemical behaviour of SnSO4 in sulfuric acid solution , 1994 .

[15]  L. T. Lam,et al.  Seeking enhanced lead/acid battery performance through the use of conductive tin-dioxide-coated glass-flakes , 1994 .

[16]  D. Pavlov,et al.  The Lead‐Acid Battery Lead Dioxide Active Mass: A Gel‐Crystal System with Proton and Electron Conductivity , 1992 .

[17]  C. Ramanathan.  Influence of calcium sulphate in the positive material on the discharge performance of lead/acid batteries , 1991 .

[18]  D. Edwards,et al.  Evaluation of hollow, glass microspheres used as an additive in positive, lead/acid battery paste , 1991 .

[19]  A. Winsel,et al.  Behaviour of the PbO2/PbSO4 electrode in sulphuric acid containing tin ions , 1990 .

[20]  A. D. Turner,et al.  The role of additives in the positive active mass of the lead/acid cell , 1989 .

[21]  M. Tsubota,et al.  Application of anisotropic graphite to sealed lead-acid batteries , 1989 .

[22]  J. Garche,et al.  On the behaviour of carbon black in positive lead-acid battery electrodes , 1987 .

[23]  J. Garche,et al.  The effect of additives on the positive lead-acid battery electrode , 1985 .

[24]  G. J. McCarthy,et al.  JCPDS-International Centre for Diffraction Data , 1981 .

[25]  V. S. Bagotzky.  Power sources 7 : Edited by J. Thompson, published by Academic Press, London, 1979, 774 pp., £65.00 or $134.50. , 1980 .

[26]  K. Bullock.  The Effect of Phosphoric Acid on the Positive Electrode in the Lead‐Acid Battery III . Mechanism , 1979 .

[27]  L. Liu.  A Fluorite Isotype of SnO2 and a New Modification of TiO2: Implications for the Earth's Lower Mantle. , 1978, Science.

[28]  D. Collins,et al.  Power Sources 3 , 1971 .

[29]  B. Bauer.  Equivalent Circuit of , 1955 .

[30]  F. M. Starr.  Equivalent circuits , 1932, Electrical Engineering.