Comparison of Birch and Beech Wood in Terms of Economic and Technological Properties for Plywood Manufacturing

The aim of this study was to investigate the use of birch wood, one of the most important wood species used in the plywood industry, especially in Europe, the Nordic countries, Poland, Belarus and Russia as an alternative to beech wood. For this purpose, comparison was made of their economic and technological properties. In five-ply plywood manufacturing, beech (Fagus orientalis Lipsky) and birch (Betula pendula) veneer sheets were used with melamine urea formaldehyde (MUF) and urea formaldehyde (UF) resins. Some mechanical properties such as shear strength, bending strength and modulus of elasticity of plywood panels were conducted according to EN 314-1 and EN 310, respectively. Mean mechanical strength obtained for birch plywood panels was quite above the limit values specified in the related standards. When taking into consideration the annual increment of beech and birch trees in 1 ha and the time they need to reach suitable diameters for the manufacturing of rotary cut veneers, it was calculated that birch trees provide 2.46 times more physical harvesting than beech trees.

[1]  Reimo Lutter,et al.  Growth development and ecology of midterm hybrid aspen and silver birch plantations on former agricultural lands , 2017 .

[2]  Ü. Mander,et al.  Biomass production and nitrogen balance of naturally afforested silver birch (Betula pendula Roth.) stand in Estonia , 2016 .

[3]  H. Militz,et al.  Changes in the microstructure of birch wood after hydrothermal treatment , 2013, Wood Science and Technology.

[4]  I. Aydin,et al.  Utilization of sycamore tree as an alternative wood specie in plywood manufacturing. , 2013 .

[5]  A. Act,et al.  PHYSICAL AND MECHANICAL PROPERTIES OF BEECH WOOD HARVESTED IN THE GREEK PUBLIC FORESTS , 2013 .

[6]  Henn Korjus,et al.  Männi-, kuuse- ja kasepuistute majandamise tasuvus lühikese raieringi korral / Profitability analysis of short rotations in Scots pine, Norway spruce and silver birch stands , 2011 .

[7]  I. Aydin,et al.  Technological and economic comparison of the usage of beech and alder wood in plywood and laminated veneer lumber manufacturing , 2006 .

[8]  C. Hill,et al.  Wood Modification: Chemical, Thermal and Other Processes , 2006 .

[9]  W. Gindl,et al.  Cell-wall hardness and Young's modulus of melamine-modified spruce wood by nano-indentation , 2002 .

[10]  C. Güler,et al.  Principal Mechanical Properties of Eastern Beech Wood ( Fagus orientalis Lipsky ) Naturally Grown in And › r › n Northeastern Mediterranean Region of Turkey ‹ , 2002 .

[11]  S. Chow,et al.  Adhesion strength and wood failure relationship in wood-glue bonds , 1979 .

[12]  J. F. Lutz.  Wood Veneer: Log Selection, Cutting, and Drying , 1978 .

[13]  W. Mcnamara,et al.  Comparison of the rate of glue-line strength development for Oak and Maple. , 1970 .