Comparison and Standardization of Numerical Approaches for the Prediction of Non-reacting and Reacting Diesel Sprays

[1]  Song-Charng Kong,et al.  Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model , 2007 .

[2]  J. Chomiak,et al.  3-D Diesel Spray Simulations Using a New Detailed Chemistry Turbulent Combustion Model , 2000 .

[3]  Rolf D. Reitz,et al.  Numerical Predictions of Diesel Flame Lift-off Length and Soot Distributions under Low Temperature Combustion Conditions , 2008 .

[4]  P. K. Senecal,et al.  A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations , 2007 .

[5]  Song-Charng Kong,et al.  Modeling diesel spray flame lift-off, sooting tendency and NOx emissions using detailed chemistry , 2005 .

[6]  Ming Chia Lai,et al.  Comparing Cavitation in Diesel Injectors Based on Different Modeling Approaches , 2004 .

[7]  Dennis L. Siebers,et al.  Measurement of the Flame Lift-Off Location on DI Diesel Sprays Using OH Chemiluminescence , 2001 .

[8]  R. Reitz,et al.  Reduction of Numerical Parameter Dependencies in Diesel Spray Models , 2007 .

[9]  Feng Tao,et al.  Three-Dimensional Simulation of Diesel Spray Ignition and Flame Lift-Off Using OpenFOAM and KIVA-3V CFD Codes , 2008 .

[10]  Evaluation of the Flame Lift-off Length in Diesel Spray Combustion Based on Flame Extinction , 2010 .

[11]  Cherian A. Idicheria,et al.  Effect of EGR on diesel premixed-burn equivalence ratio , 2007 .

[12]  T. Lucchini,et al.  Coupling of in situ adaptive tabulation and dynamic adaptive chemistry: An effective method for solving combustion in engine simulations , 2011 .

[13]  Dennis L. Siebers,et al.  Relationship Between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction , 2011 .

[14]  Sibendu Som,et al.  ASSESSMENT OF ATOMIZATION MODELS FOR DIESEL ENGINE SIMULATIONS , 2009 .

[15]  Tommaso Lucchini,et al.  Numerical Investigation of Non-Reacting and Reacting Diesel Sprays in Constant-Volume Vessels , 2009 .

[16]  Christopher J. Rutland,et al.  A new droplet collision algorithm , 2000 .

[17]  Dennis L. Siebers,et al.  Flame Lift-Off on Direct-Injection Diesel Sprays Under Quiescent Conditions , 2001 .

[18]  D. Haworth Progress in probability density function methods for turbulent reacting flows , 2010 .

[19]  J. Abraham,et al.  A NUMERICAL INVESTIGATION OF FLAME LIFT-OFF IN DIESEL JETS , 2007 .

[20]  Raul Payri,et al.  A new methodology for correcting the signal cumulative phenomenon on injection rate measurements , 2008 .

[21]  Tommaso Lucchini,et al.  Simplified and Detailed Chemistry Modeling of Constant-Volume Diesel Combustion Experiments , 2008 .

[22]  Tianfeng Lu,et al.  Dynamic stiffness removal for direct numerical simulations , 2009 .

[23]  Caroline L. Genzale,et al.  Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities , 2010 .

[24]  Suresh K. Aggarwal,et al.  Quantitative X-ray measurements of high-pressure fuel sprays from a production heavy duty diesel injector , 2009 .

[25]  R. Reitz,et al.  Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission , 1998 .

[26]  Sibendu Som,et al.  A comparison of injector flow and spray characteristics of biodiesel with petrodiesel , 2010 .

[27]  P. Senecal,et al.  Multi-Dimensional Modeling of Direct-Injection Diesel Spray Liquid Length and Flame Lift-off Length using CFD and Parallel Detailed Chemistry , 2003 .

[28]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[29]  P. Nordin Complex Chemistry Modeling of Diesel Spray Combustion , 2001 .

[30]  Rolf D. Reitz,et al.  An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations , 2008 .

[31]  R. Reitz Modeling atomization processes in high-pressure vaporizing sprays , 1987 .

[32]  J. Naber,et al.  Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays , 1996 .

[33]  John Abraham,et al.  Modeling the outcome of drop–drop collisions in Diesel sprays , 2002 .

[34]  Christopher F. Powell,et al.  Development and Validation of a Primary Breakup Model for Diesel Engine Applications , 2009 .

[35]  C. Westbrook,et al.  A Comprehensive Modeling Study of n-Heptane Oxidation , 1998 .

[36]  Tommaso Lucchini,et al.  Fundamental and Applied Studies of Detailed Chemistry Based Models for Diesel Combustion , 2008 .

[37]  S. Som,et al.  Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines , 2010 .

[38]  Sibendu Som,et al.  Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions , 2011 .

[39]  D. Veynante,et al.  Simulation of flame lift-off on a diesel jet using a generalized flame surface density modeling approach , 2005 .

[40]  Sibendu Som,et al.  Development and validation of spray models for investigating diesel engine combustion and emissions , 2009 .