Analysis, control, and modeling of the three‐port converter without port voltage constraint for photovoltaic/battery system application

[1]  Vahid Abbasi,et al.  Effective combination of quadratic boost converter with voltage multiplier cell to increase voltage gain , 2020, IET Power Electronics.

[2]  Po-Hung Chen,et al.  A single-inductor dual-input dual-output (SIDIDO) power management with sequential pulse-skip modulation for battery/PV hybrid systems , 2016, 2016 IEEE Asian Solid-State Circuits Conference (A-SSCC).

[3]  Kai Sun,et al.  Topology Derivation of Nonisolated Three-Port DC–DC Converters From DIC and DOC , 2013, IEEE Transactions on Power Electronics.

[4]  Shang Gao,et al.  Performance Evaluation of A Non-Isolated Three-Port Converter for PV-Battery Hybrid Energy System , 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society.

[5]  M. Kaliamoorthy,et al.  Dynamic Power Management System Employing a Single-Stage Power Converter for Standalone Solar PV Applications , 2018, IEEE Transactions on Power Electronics.

[6]  Leonardo Kessler Slongo,et al.  Nanosatellite electrical power system architectures: Models, simulations, and tests , 2020, Int. J. Circuit Theory Appl..

[7]  I. Batarseh,et al.  Modeling and Control of Three-Port DC/DC Converter Interface for Satellite Applications , 2010, IEEE Transactions on Power Electronics.

[8]  Dianguo Xu,et al.  Hardware Decoupling and Autonomous Control of Series-Resonance-Based Three-Port Converters in DC Microgrids , 2019, IEEE Transactions on Industry Applications.

[9]  Pengcheng Zhang,et al.  Nonisolated Wide Operation Range Three-Port Converters With Variable Structures , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[10]  Guodong Xu,et al.  A Nonisolated Symmetric Bipolar Output Four-Port Converter Interfacing PV-Battery System , 2020, IEEE Transactions on Power Electronics.

[11]  Issa Batarseh,et al.  Ultra-Highly Efficient Low-Power Bidirectional Cascaded Buck-Boost Converter for Portable PV-Battery-Devices Applications , 2019, IEEE Transactions on Industry Applications.

[12]  M. Sabahi,et al.  Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System , 2012, IEEE Transactions on Power Electronics.

[13]  Wei Qiao,et al.  An Isolated Multiport DC–DC Converter for Simultaneous Power Management of Multiple Different Renewable Energy Sources , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[14]  Alex Q. Huang,et al.  A High Step-Up Three-Port DC–DC Converter for Stand-Alone PV/Battery Power Systems , 2013, IEEE Transactions on Power Electronics.

[15]  Mahmoodreza Eskandarpour Azizkandi,et al.  Design and analysis of a high step‐up single‐switch coupled inductor DC‐DC converter with low‐voltage stress on components for PV power application , 2019, Int. J. Circuit Theory Appl..

[16]  Ebrahim Babaei,et al.  A new topology for nonisolated multiport zero voltage switching dc‐dc converter , 2018, Int. J. Circuit Theory Appl..

[17]  Wing-Hung Ki,et al.  A Novel Single-Inductor Dual-Input Dual-Output DC–DC Converter With PWM Control for Solar Energy Harvesting System , 2014, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[18]  Donglai Zhang,et al.  A Nonisolated Three-Port DC–DC Converter and Three-Domain Control Method for PV-Battery Power Systems , 2015, IEEE Transactions on Industrial Electronics.

[19]  Reza Ahmadi,et al.  Double-Input Converters Based on H-Bridge Cells: Derivation, Small-Signal Modeling, and Power Sharing Analysis , 2012, IEEE Transactions on Circuits and Systems I: Regular Papers.

[20]  Xiaofeng Sun,et al.  A PWM and PFM Hybrid Modulated Three-Port Converter for a Standalone PV/Battery Power System , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[21]  Dylan Dah-Chuan Lu,et al.  Non-Isolated Single-Inductor DC/DC Converter With Fully Reconfigurable Structure for Renewable Energy Applications , 2018, IEEE Transactions on Circuits and Systems II: Express Briefs.

[22]  Guohua Zhou,et al.  Topology Synthesis of a Family of Integrated Three-Port Converters for Renewable Energy System Applications , 2020 .

[23]  Muniraj Chinnusamy,et al.  Experimental investigation of PV based modified SEPIC converter fed hybrid electric vehicle (PV‐HEV) , 2020, Int. J. Circuit Theory Appl..

[24]  Haibing Hu,et al.  Multiport Converters Based on Integration of Full-Bridge and Bidirectional DC–DC Topologies for Renewable Generation Systems , 2014, IEEE Transactions on Industrial Electronics.

[25]  Zhe Zhang,et al.  Multi-port isolated LLC resonant converter for distributed energy generation with energy storage , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[26]  Huiqing Wen,et al.  Topology Derivation and Analysis of Integrated Multiple Output Isolated DC–DC Converters With Stacked Configuration for Low-Cost Applications , 2017, IEEE Transactions on Circuits and Systems I: Regular Papers.

[27]  Tamas Kerekes,et al.  Three-port DC–DC converter based on quadratic boost converter for stand-alone PV/battery systems , 2020 .

[28]  A. Kwasinski,et al.  A Modified-Time-Sharing Switching Technique for Multiple-Input DC–DC Converters , 2012, IEEE Transactions on Power Electronics.

[29]  Rakesh Thankakan,et al.  Investigation of the double input power converter with N stages of voltage multiplier using PSO‐based MPPT technique for the thermoelectric energy harvesting system , 2020, Int. J. Circuit Theory Appl..

[30]  Guohua Zhou,et al.  A Novel Dual-input Dual-output Converter and Dynamic Energy Management for PV/Battery Systems , 2019, 2019 IEEE Energy Conversion Congress and Exposition (ECCE).

[31]  Issa Batarseh,et al.  Review of Multiport Converters for Solar and Energy Storage Integration , 2019, IEEE Transactions on Power Electronics.