Upgrading of liquid fuel from the vacuum pyrolysis of biomass over the Mo–Ni/γ-Al2O3 catalysts

High amounts of acid compounds in bio-oil not only lead to the deleterious properties such as corrosiveness and high acidity, but also set up many obstacles to its wide applications. By hydrotreating the bio-oil under mild conditions, some carboxylic acid compounds could be converted to alcohols which would esterify with the unconverted acids in the bio-oil to produce esters. The properties of the bio-oil could be improved by this method. In the paper, the raw bio-oil was produced by vacuum pyrolysis of pine sawdust. The optimal production conditions were investigated. A series of nickel-based catalysts were prepared. Their catalytic activities were evaluated by upgrading of model compound (glacial acetic acid). Results showed that the reduced Mo-10Ni/gamma-Al2O3 catalyst had the highest activity with the acetic acid conversion of 33.2%. Upgrading of the raw bio-oil was investigated over reduced Mo-10Ni/gamma-Al2O3 catalyst. After the upgrading process, the pH value of the bio-oil increased from 2.16 to 2.84. The water content increased from 46.2 wt.% to 58.99 wt.%. The H element content in the bio-oil increased from 6.61 wt.% to 6.93 wt.%. The dynamic viscosity decreased a little. The results of GC-MS spectrometry analysis showed that the ester compounds in the upgraded bio-oil increased by 3 times. it is possible to improve the properties of bio-oil by hydrotreating and esterifying carboxyl group compounds in the bio-oil. (C) 2009 Elsevier Ltd. All rights reserved.

[1]  Anja Oasmaa,et al.  Characterization of biomass-based flash pyrolysis oils , 1998 .

[2]  A. Bridgwater,et al.  Overview of Applications of Biomass Fast Pyrolysis Oil , 2004 .

[3]  Rafael Kandiyoti,et al.  Structural characterization of biomass pyrolysis tars/oils from eucalyptus wood waste : effect of H2 pressure and sample configuration , 1997 .

[4]  Qing-Shi Zhu,et al.  Thermal conversion of rice husks and sawdust to liquid fuel. , 2006, Waste management.

[5]  Peter McKendry,et al.  Energy production from biomass (Part 1): Overview of biomass. , 2002, Bioresource technology.

[6]  J. M. Arandes,et al.  Enhancement of pyrolysis gasoline hydrogenation over Pd-promoted Ni/SiO2–Al2O3 catalysts , 2007 .

[7]  S. Vitolo,et al.  Physical and combustion characterization of pyrolytic oils derived from biomass material upgraded by catalytic hydrogenation , 1994 .

[8]  Daniel Montané,et al.  Biomass to hydrogen via fast pyrolysis and catalytic steam reforming of the pyrolysis oil or its fractions , 1996 .

[9]  Stefan Czernik,et al.  Production of Hydrogen from Biomass by Catalytic Steam Reforming of Fast Pyrolysis Oils , 1998 .

[10]  Z. Suping,et al.  Study of Hydrodeoxygenation of Bio-Oil from the Fast Pyrolysis of Biomass , 2003 .

[11]  Piero Baglioni,et al.  Development of emulsions from biomass pyrolysis liquid and diesel and their use in engines—Part 1 : emulsion production , 2003 .

[12]  Jie Chang,et al.  Upgrading Bio-oil over Different Solid Catalysts , 2006 .

[13]  A. Krause,et al.  Hydrodeoxygenation of methyl esters on sulphided NiMo/γ-Al2O3 and CoMo/γ-Al2O3 catalysts , 2005 .

[14]  A. Krause,et al.  Catalytic conversion of biomass pyrolysis vapours with zinc oxide , 2000 .

[15]  A. Megaritis,et al.  A two-stage fixed-bed reactor for direct hydrotreatment of volatiles from the hydropyrolysis of biomass: effect of catalyst temperature, pressure and catalyst ageing time on product characteristics , 1998 .

[16]  Piero Baglioni,et al.  Development of emulsions from biomass pyrolysis liquid and diesel and their use in engines - Part 2: tests in diesel engines , 2003 .