Lima1c, Kelly Iapuque Rodrigues de Sousa1d, Paulo Ricardo Gherardi Hein1e, Paulo Fernando Trugilho1f DEVELOPING NEAR INFRARED SPECTROSCOPIC MODELS FOR PREDICTING DENSITY OF Eucalyptus WOOD BASED ON INDIRECT MEASUREMENT ARRIEL,

The objective of this study was to establish multivariate models for the prediction of wood basic density with reference to the values of average density of trees and near infrared (NIR) spectra measured in the breast height. The wood basic density of 39 Eucalyptus clones was determined in the laboratory by means of the mean longitudinal positions of 0%, 2%, 10%, 30%, 50% and 75% of the commercial height of the tree by the gravimetric method. NIR spectra were recorded using a spectrometer using optical fiber probe and integrating sphere directly on the transverse plane of the solid wood in disks collected from diameter at breast height and later in the sawdust. The performance of the NIR based models was evaluated according to the spectral acquisition method and sample preparation. The results showed that the best model for basic density estimation using indirect measurements was developed from the average spectra per clone measured in solid wood disks (R2cv of 0.77 and RMSEcv of 15 kg.m-3). v.25 n.3 2019

[1]  P. R. Hein,et al.  NEAR INFRARED SPECTROSCOPY: RAPID AND ACCURATE ANALYTICAL TOOL FOR PREDICTION OF NON-STRUCTURAL CARBOHYDRATES IN WOOD , 2019, CERNE.

[2]  C. Pasquini.  Near infrared spectroscopy: A mature analytical technique with new perspectives - A review. , 2018, Analytica chimica acta.

[3]  P. F. Trugilho,et al.  Influence of spectral acquisition technique and wood anisotropy on the statistics of predictive near infrared–based models for wood density , 2018 .

[4]  Thiago Campos Monteiro,et al.  Relação entre a densidade básica e as retrações em madeira de teca , 2018 .

[5]  R. Oliveira,et al.  NIR spectroscopic models for phenotyping wood traits in breeding programs of Eucalyptus benthamii , 2017 .

[6]  C. S. Nascimento,et al.  Estimativa da densidade básica da madeira de Eschweilera odora (Poepp.) Miers por espectroscopia no infravermelho próximo , 2017 .

[7]  R. Baettig,et al.  Evaluation of intra-ring wood density profiles using NIRS: comparison with the X-ray method , 2017, Annals of Forest Science.

[8]  W. L. E. Magalhães,et al.  Espectroscopia no infravermelho próximo para estimativa da densidade básica de madeiras de Pinus. , 2016 .

[9]  J. Sandak,et al.  Assessing Trees, Wood and Derived Products with near Infrared Spectroscopy: Hints and Tips , 2016 .

[10]  Y. M. Dubey,et al.  Enhancing the applicability of near infrared spectroscopy for estimating specific gravity of green timber from Eucalyptus tereticornis by developing composite calibration using both radial and tangential face of wood , 2013, European Journal of Wood and Wood Products.

[11]  M. Peredo,et al.  Variación de la densidad de la madera y rendimiento pulpable en clones de Eucalyptus globulus evaluado con espectroscopía de infrarrojo cercano , 2013 .

[12]  P. R. Hein.  Estimating Shrinkage, Microfibril Angle and Density of Eucalyptus Wood Using near Infrared Spectroscopy , 2012 .

[13]  S. Tsuchikawa,et al.  Prediction of Wood Density Independently of Moisture Conditions Using near Infrared Spectroscopy , 2012 .

[14]  Sebastian Pfautsch,et al.  Assessing sapwood depth and wood properties in Eucalyptus and Corymbia spp. using visual methods and near infrared spectroscopy (NIR) , 2012, Trees.

[15]  Ricardo Jorge Klitzke,et al.  Densidade básica e retratibilidade da madeira de clones de três espécies de Eucalyptus , 2010 .

[16]  M. Schwanninger,et al.  A common near infrared—based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix × eurolepis , 2010, Wood Science and Technology.

[17]  Paulo Fernando Trugilho,et al.  MODELOS DE CALIBRAÇÃO E A ESPECTROSCOPIA NO INFRAVERMELHO PRÓXIMO PARA PREDIÇÃO DAS PROPRIEDADES QUÍMICAS E DA DENSIDADE BÁSICA DA MADEIRA DE Eucalyptus , 2010 .

[18]  P. Ricardo,et al.  Multivariate regression methods for estimating basic density in Eucalyptus wood from near infrared spectroscopic data , 2010 .

[19]  J. Githiomi,et al.  Wood basic density of Eucalyptus grandis from plantations in Central Rift Valley, Kenya: variation with age, height level and between sapwood and heartwood. , 2010 .

[20]  P. R. Hein,et al.  Robustness of Models Based on near Infrared Spectra to Predict the Basic Density in Eucalyptus Urophylla Wood , 2009 .

[21]  Bo Johnsson,et al.  NIR techniques create added values for the pellet and biofuel industry. , 2009, Bioresource technology.

[22]  Paulo Ricardo Gherardi Hein,et al.  Effects of sample preparation on NIR spectroscopic estimation of chemical properties of Eucalyptus urophylla S.T. Blake wood , 2009 .

[23]  Gilles Chaix,et al.  Near infrared spectroscopy for estimating wood basic density in eucalyptus urophylla and Eucalyptus grandis , 2009 .

[24]  Satoru Tsuchikawa,et al.  Application of near Infrared Spectroscopy for Estimating Wood Mechanical Properties of Small Clear and Full Length Lumber Specimens , 2008 .

[25]  Richard F. Daniels,et al.  Success in Using near Infrared Spectroscopy to Estimate Wood Properties of Pinus Taeda Radial Strips Not Due to Autocorrelation , 2005 .

[26]  David E. Booth,et al.  Chemometrics: Data Analysis for the Laboratory and Chemical Plant , 2004, Technometrics.

[27]  Richard F. Daniels,et al.  Estimation of the physical wood properties of green Pinus taeda radial samples by near infrared spectroscopy , 2003 .

[28]  C. Raymond.  Genetics of Eucalyptus wood properties , 2002 .

[29]  A. J. Panshin,et al.  Textbook of Wood Technology , 1964 .

[30]  Harold L. Mitchell,et al.  A concept of intrinsic wood quality, and nondestructive methods for determining quality in standing timber , 1961 .