Optical and pressure diagnostics of 4-MV water switches in the Z-20 test Facility

We are studying the behavior of self-breaking, high-voltage water switches for the Z refurbishment project. In Z-20, three or four water switches in parallel are charged to 4 MV in /spl sim/220 ns. The water gap between switch electrodes is 13-15 cm, and the enhancement of the positive and negative electrodes is varied to study time-evolution of the breakdown arcs, current sharing, and switch simultaneity. In addition to the standard electrical diagnostics (V,I), we are looking at one or more of the switches during the breakdown phase with two optical diagnostics: a streak camera and a fast framing camera. The streak camera has /spl sim/1-ns resolution, and the framing camera provides seven frames with >5 ns exposure times. For identical electric fields, the streamers originating on the positive electrode form earlier and move more rapidly than the streamers originating on the negative electrode. We observe four distinct phases in the closure of the water switches that depend on the macroscopic electric fields in the water: 1) No streamers propagate at E-fields below /spl sim/100 kV/cm from positive electrodes or voltages below /spl sim/140 kV/cm for negative electrodes; 2) streamers propagate with constant velocity between 100 and /spl sim/300 kV/cm; 3) above 300 kV/cm, the streamer velocities become linearly proportional to the electric field; 4) above 600 kV/cm, the velocity of streamers from the negative electrodes appears to saturate at /spl sim/100 cm//spl mu/s. The velocity of the streamers from the positive electrode continues to increase with E-field, reaching /spl sim/1% of the speed of light when the switch reaches closure.

[1]  M. Kincy,et al.  Hydrodynamic loading of structural components due to electrical discharge in fluids , 2003, Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472).

[2]  K.W. Struve,et al.  Design options for a pulsed-power upgrade of the Z accelerator , 2001, PPPS-2001 Pulsed Power Plasma Science 2001. 28th IEEE International Conference on Plasma Science and 13th IEEE International Pulsed Power Conference. Digest of Papers (Cat. No.01CH37251).

[3]  Edward F. Kelley,et al.  HYDRODYNAMIC SHOCK WAVE PROPAGATION AFTER ELECTRICAL BREAKDOWN. , 1982 .

[4]  A R Miller.  Sub-OHM Coaxial Pulse Generators, BLACKJACK 3, 4 and 5 , 1981 .

[5]  J. VanDevender.  The resistive phase of a high-voltage water spark , 1978 .

[6]  I. Smith.  Pulsed Power In The United States , 1991, Eighth IEEE International Conference on Pulsed Power.

[7]  J. Qian,et al.  Model analysis of breakdown in high-voltage, water-based switches , 2003, Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472).

[8]  T. H. Martin,et al.  High Power Density Water Dielectric Switching , 1980, IEEE Transactions on Plasma Science.

[9]  P. Corcoran,et al.  Water switches impedance from Screamer circuit model and experimental waveform match , 2003, Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472).

[10]  G. Chandler,et al.  Tungsten wire-array Z-pinch experiments at 200 TW and 2 MJ , 1998 .

[11]  T. H. Martin,et al.  Untriggered Water Switching , 1975, IEEE Transactions on Nuclear Science.

[12]  P. Wong,et al.  High-speed schlieren studies of electrical breakdown in liquid hydrocarbons , 1977, Conference on Electrical Insulation & Dielectric Phenomena - Annual Report 1976.

[13]  Gary E Rochau,et al.  PBFA (Particle Beam Fusion Accelerator) II: The pulsed power characterization phase , 1987 .

[14]  H. Bluhm,et al.  Design of a 6 MV, 2 TW positive ion driver using an induction adder , 1993, Ninth IEEE International Pulsed Power Conference.

[15]  S. I. Andreev,et al.  ON THE THEORY OF THE DEVELOPMENT OF A SPARK DISCHARGE. I. , 1965 .