Mobility and Geometric Analysis of the Hoberman Switch-Pitch Ball and Its Variant

This paper investigates the mobility and kinematics of the Hoberman switch-pitch ball, and particularly, its variant that does not resort to bevel gears. The ball variant is a general case of the Hoberman switch-pitch ball and constitutes the ball. This paper starts from examining the geometry of the ball variant and its composition, and decomposes it into loops containing eight-bar radially foldable linkages. To investigate the eight-bar radially foldable linkage, constraint matrices are developed using the screw-loop equation. This paper extends the study to the ball variant and investigates the singularity and various configurations based on the geometry and kinematics of the ball variant. This leads to the investigation of the Hoberman switch-pitch ball as a special case of the ball variant with bevel gears to simultaneously drive three joints in every vertex of the ball mechanism. The analysis is then followed by a numerical demonstration of the kinematic characteristics of the Hoberman switch-pitch ball. DOI: 10.1115/1.4001730

[1]  K. Wohlhart.  Screw Spaces and Connectivities in Multiloop Linkages , 2004 .

[2]  Blane Baker.  Using an Expandable Toy in Discussing Rotational Motion , 2005 .

[3]  Jian S. Dai,et al.  Interrelationship between screw systems and corresponding reciprocal systems and applications , 2001 .

[4]  J. R. Jones,et al.  Null–space construction using cofactors from a screw–algebra context , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[5]  R. Bricard.  Leçons de cinématique , .

[6]  Mark Yim,et al.  Polyhedral single degree-of-freedom expanding structures , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[7]  T. Davies.  Kirchhoff's circulation law applied to multi-loop kinematic chains , 1981 .

[8]  Ferdinando Cannella,et al.  Stiffness Characteristics of Carton Folds for Packaging , 2008 .

[9]  J.Eddie Baker.  On mobility and relative freedoms in multiloop linkages and structures , 1981 .

[10]  J.Eddie Baker,et al.  On relative freedom between links in kinematic chains with cross-jointing , 1980 .

[11]  Larry L. Howell,et al.  Kinematic Representations of Pop-Up Paper Mechanisms , 2007 .

[12]  Larry L. Howell,et al.  Lamina Emergent Mechanisms and Their Basic Elements , 2010 .

[13]  Jian S. Dai,et al.  Mobility Change in Two Types of Metamorphic Parallel Mechanisms , 2009 .

[14]  G. Gogu.  Mobility of mechanisms: a critical review , 2005 .

[15]  H. Lipkin,et al.  Mobility of Overconstrained Parallel Mechanisms , 2006 .

[16]  Jian S. Dai,et al.  Mobility analysis of a complex structured ball based on mechanism decomposition and equivalent screw system analysis , 2004 .

[17]  K. Waldron.  The constraint analysis of mechanisms , 1966 .

[18]  Z. Huang,et al.  Type Synthesis of Symmetrical Lower-Mobility Parallel Mechanisms Using the Constraint-Synthesis Method , 2003, Int. J. Robotics Res..

[19]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[20]  Ellen Yi-Luen Do,et al.  FlexM: Designing a Physical Construction Kit for 3d Modeling , 2006 .

[21]  Jian S. Dai,et al.  Screw System Analysis of Parallel Mechanisms and Applications to Constraint and Mobility Study , 2004 .

[22]  Jian S. Dai,et al.  Reconfiguration of Spatial Metamorphic Mechanisms , 2009 .

[23]  Zhong You,et al.  Motion structures extend their reach , 2007 .

[24]  G. K. Ananthasuresh,et al.  A kinematic theory for radially foldable planar linkages , 2007 .

[25]  Jadran Lenarčič,et al.  Advances in Robot Kinematics , 2000 .

[26]  J. Dai,et al.  Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds , 1998 .