Probabilistic High-Cycle Fretting Fatigue Assessment of Gas Turbine Engine Components

High-cycle fatigue (HCF) is arguably one of the costliest sources of in-service damage in military aircraft engines. HCF of turbine blades and disks can pose a significant engine risk because fatigue failure can result from resonant vibratory stresses sustained over a relatively short time. A common approach to mitigate HCF risk is to avoid dangerous resonant vibration modes (first bending and torsion modes, etc.) and instabilities (flutter and rotating stall) in the operating range. However, it might be impossible to avoid all the resonance for all flight conditions. In this paper, a methodology is presented to assess the influences of HCF loading on the fracture risk of gas turbine engine components subjected to fretting fatigue. The methodology is based on an integration of a global finite element analysis of the disk-blade assembly, numerical solution of the singular integral equations using the CAPRI (Contact Analysis for Profiles of Random Indenters) and Worst Case Fret methods, and risk assessment using the DARWIN (Design Assessment of Reliability with Inspection) probabilistic fracture mechanics code. The methodology is

[1]  J. Ruschau,et al.  Advanced High Cycle Fatigue (HCF) Life Assurance Methodologies , 2004 .

[2]  Thomas Farris,et al.  Modeling interfacial conditions in nominally flat contacts for application to fretting fatigue of turbine engine components , 1999 .

[3]  M. E. Haddad,et al.  Fatigue Crack Propagation of Short Cracks , 1979 .

[4]  Michael P. Enright,et al.  Probabilistic Fretting Fatigue Assessment of Aircraft Engine Disks , 2009 .

[5]  Abdulnaser I. Sayma,et al.  An Integrated Time-Domain Aeroelasticity Model for the Prediction of Fan Forced Response due to Inlet Distortion , 2002 .

[6]  Samir Naboulsi,et al.  Design methodology to investigate contact fatigue damage in turbine engine hardware , 2005 .

[7]  J. Newman A crack opening stress equation for fatigue crack growth , 1984 .

[8]  Harry R. Millwater,et al.  Probabilistic methods for design assessment of reliability with inspection , 2002 .

[9]  David L. Davidson,et al.  A fracture mechanics approach to high cycle fretting fatigue based on the worst case fret concept – I. Model development , 2001 .

[10]  Patrick J. Golden,et al.  A fracture mechanics life prediction methodology applied to dovetail fretting , 2006 .

[11]  Aspi Rustom Wadia,et al.  Structures and Dynamics Committee Best Paper of 1996 Award: Inlet Distortion Generated Forced Response of a Low-Aspect-Ratio Transonic Fan , 1997 .

[12]  Theodore Nicholas,et al.  Critical issues in high cycle fatigue , 1999 .

[13]  B. A. Cowles,et al.  High cycle fatigue in aircraft gas turbines—an industry perspective , 1996 .

[14]  Michael P. Enright,et al.  Residual stress profiles for mitigating fretting fatigue in gas turbine engine disks , 2010 .

[15]  S. Mall,et al.  Dugdale plastic zone size and CTOD equations for the compact specimen , 1984 .

[16]  A. V. Srinivasan,et al.  Flutter and Resonant Vibration Characteristics of Engine Blades , 1997 .

[17]  Thomas Farris,et al.  Finite element analysis of the mechanics of blade/disk contacts , 2005 .

[18]  Patrick J. Golden Development of a Dovetail Fretting Fatigue Fixture for Turbine Engine Materials (Preprint) , 2006 .

[19]  Michael P. Enright,et al.  Fretting Fatigue-Based Risk Assessment of Gas Turbine Engine Disks , 2008 .