Piezoelectric Microgenerators-Current Status and Challenges

This manuscript reviews the developments made in design and fabrication of piezoelectric microgenerators and presents a method for making a comparative study within various vibration energy harvesting mechanisms. Current generation vibration energy harvesters have power density in the range of 0.8 muW/mm3. The manuscript also reports our results on synthesis of barium titanate (BT) thin films for MEMS (micro-electromechanical systems) based energy harvester. BT sol-gel was synthesized by aqueous process using barium acetate and titanium bis (ammonium lacto) dihydroxide with PVP (Polyvinylpyrrolidone). After optimizing the annealing temperature and time, textured BT films with 600 nm thickness were obtained on (111) Pt/Ti/SiO2 wafer. A MEMS fabrication process flow was designed to produce microcantilever chips from BT films constituting 6 cantilevers connected in series with an interdigital electrode pattern. We also present some concepts for further improvement of the power density of vibration energy harvesters by incorporating 3-D structure, magnetoelectric material, and a multimodal scheme.

[1]  Lu Dong,et al.  Fabrication and performance of MEMS-based piezoelectric power generator for vibration energy harvesting , 2006, Microelectron. J..

[2]  S. Roundy.  Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration-to-Electricity Conversion , 2003 .

[3]  Sang-Gook Kim,et al.  MEMS power generator with transverse mode thin film PZT , 2005 .

[4]  D. Leo,et al.  Laser-machined piezoelectric cantilevers for mechanical energy harvesting , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  H. Wikle,et al.  The design, fabrication and evaluation of a MEMS PZT cantilever with an integrated Si proof mass for vibration energy harvesting , 2008 .

[6]  Saibal Roy,et al.  Design , fabrication and test of integrated microscale vibration-based electromagnetic generator , 2008 .

[7]  Neil M. White,et al.  Towards a piezoelectric vibration-powered microgenerator , 2001 .

[8]  Yonas Tadesse,et al.  Multimodal Energy Harvesting System: Piezoelectric and Electromagnetic , 2009 .

[9]  Saibal Roy,et al.  A micro electromagnetic generator for vibration energy harvesting , 2007 .

[10]  Isaku Kanno,et al.  Piezoelectric Properties of (K,Na)NbO3 Films Deposited by RF Magnetron Sputtering , 2008 .

[11]  V. M. Petrov,et al.  Frequency and field dependence of magnetoelectric interactions in layered ferromagnetic transition metal-piezoelectric lead zirconate titanate , 2005 .

[12]  J. Ouyang,et al.  Theoretical investigation of the intrinsic piezoelectric properties for tetragonal BaTiO3 epitaxial films , 2006 .

[13]  Shuxiang Dong,et al.  Giant magneto-electric effect in laminate composites , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[14]  S. Priya.  Advances in energy harvesting using low profile piezoelectric transducers , 2007 .

[15]  S. Priya,et al.  Large magnetoelectric coefficient in Co-fired Pb (Zr0.52Ti0.48)O3–Pb (Zn1/3Nb2/3)O3–Ni0.6Cu0.2Zn0.2Fe2O4 trilayer magnetoelectric composites , 2008 .

[16]  S. Dong,et al.  Recent advancements in magnetoelectric particulate and laminate composites , 2007 .

[17]  K. Ohwada,et al.  Measurement of Piezoelectric Constant of ZnO Thin Film on Si Microstructure , 1995 .

[18]  N. Kasagi,et al.  Micro Seismic Power Generator Using Electret Polymer Film , 2004 .

[19]  R. B. Yates,et al.  Analysis Of A Micro-electric Generator For Microsystems , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[20]  B. Lee,et al.  Preparation, structure evolution and dielectric properties of BaTiO3 thin films and powders by an aqueous sol–gel process , 2001 .

[21]  Daniel J. Inman,et al.  Energy Harvesting Technologies , 2008 .

[22]  Marc Boillat,et al.  Polyimide membrane with ZnO piezoelectric thin film pressure transducers as a differential pressure liquid flow sensor , 2003 .

[23]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[24]  H. Kozuka,et al.  Crack-Free, Thick Ceramic Coating Films via Non-Repetitive Dip-Coating Using Polyvinylpyrrolidone as Stress-Relaxing Agent , 2000 .

[25]  Kenji Uchino,et al.  Crystal Orientation Dependence of Piezoelectric Properties in Lead Zirconate Titanate: Theoretical Expectation for Thin Films , 1997 .

[26]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[27]  K. Wasa,et al.  Piezoelectric properties of (K,Na)NbO 3 thin films deposited on (001)SrRuO 3/Pt/MgO substrates , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[28]  Neil N. H. Ching,et al.  A Laser-micromachined Vibrational to Electrical Power Transducer for Wireless Sensing Systems , 2001 .

[29]  B. Charlot,et al.  Piezoelectric micro-machined ultrasonic transducer (pMUT) for energy harvesting , 2005, IEEE Ultrasonics Symposium, 2005..

[30]  K. Wasa,et al.  Piezoelectric properties of (K,Na)NbO 3 thin films deposited on (001)SrRuO 3/Pt/MgO substrates , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[31]  Neil M. White,et al.  An electromagnetic, vibration-powered generator for intelligent sensor systems , 2004 .

[32]  E. Koukharenko,et al.  Fabrication and Test of Integrated Micro-Scale Vibration Based Electromagnetic Generator , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[33]  Jinrong Cheng,et al.  A strong magnetoelectric voltage gain effect in magnetostrictive-piezoelectric composite , 2004 .

[34]  Skandar Basrour,et al.  Design and fabrication of piezoelectric micro power generators for autonomous microsystems , 2005 .

[35]  Ming Yuan He,et al.  Sputtered A1N Thin Films for Piezoelectric MEMS Devices , 2006, 2006 5th IEEE Conference on Sensors.

[36]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.

[37]  R. B. Yates,et al.  Development of an electromagnetic micro-generator , 2001 .

[38]  Ghislain Despesse,et al.  Fabrication and characterization of high damping electrostatic micro devices for vibration energy scavenging , 2005 .

[39]  Takaaki Tsurumi,et al.  Domain size dependence of d33 piezoelectric properties for barium titanate single crystals with engineered domain configurations , 2005 .

[40]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[41]  S. Priya,et al.  Giant magnetoelectric effect in sintered multilayered composite structures , 2008 .

[42]  Philip H. W. Leong,et al.  A Laser-micromachined Multi-modal Resonating Power Transducer for Wireless Sensing Systems , 2001 .

[43]  S. Priya,et al.  Realization of high-energy density polycrystalline piezoelectric ceramics , 2006 .

[44]  S. Trolier-McKinstry,et al.  Thin Film Piezoelectrics for MEMS , 2004 .

[45]  Joseph A. Paradiso,et al.  Energy scavenging for mobile and wireless electronics , 2005, IEEE Pervasive Computing.