Particle deposition in obstructed airways.

One approach to tackle the particle deposition in human lungs in close proximity is to develop an understanding of the particle motion in bifurcation airways. Chronic obstructive pulmonary disease (COPD) is one of the most common diseases in humans. COPD always results in inflammation that leads to narrowing and obstructing of the airways. The obstructive airways can alter the respiratory flow and particle deposition significantly. In order to study the effect of obstruction on particle deposition, four three-dimensional four-generation lung models based on the 23-generation model of Weibel [1963. Morphometry of the Human Lung. New York Academic Press, Springer, Berlin.] have been generated. The fully three-dimensional incompressible laminar Navier-Stokes equations are solved using computational fluid dynamics (CFD) solver on structured hexahedral meshes. Subsequently, a symmetric four-generation airway model serves as the reference and the other three models are considered to be obstructed at each generation, respectively. The calculation results show that the obstructive airway has significant influence on the particle deposition down-stream of the obstruction. The skewed velocity profile in the bifurcation airway is modified by the throat; consequently, more particles impact on the divider which results in higher deposition efficiency.

[1]  C Kleinstreuer,et al.  Effect of particle inlet distributions on deposition in a triple bifurcation lung airway model. , 2001, Journal of aerosol medicine : the official journal of the International Society for Aerosols in Medicine.

[2]  C. Kleinstreuer,et al.  Computational Analysis of Micron-particle Deposition in a Human Triple Bifurcation Airway Model , 2002, Computer methods in biomechanics and biomedical engineering.

[3]  H. Y. Luo,et al.  Respiratory flow in obstructed airways. , 2006, Journal of biomechanics.

[4]  D. Fisher,et al.  PARTICLE DEPOSITION IN BIFURCATING AIRWAY MODELS WITH VARYING AIRWAY GEOMETRY , 1994 .

[5]  Clement Kleinstreuer,et al.  Flow structures and particle deposition patterns in double-bifurcation airway models. Part 2. Aerosol transport and deposition , 2001, Journal of Fluid Mechanics.

[6]  M. K. Chung,et al.  Characteristics of inertial deposition in a double bifurcation , 1996 .

[7]  C Kleinstreuer,et al.  Aerosol transport and deposition in sequentially bifurcating airways. , 2000, Journal of biomechanical engineering.

[8]  Fluid Dynamics Modeling of Particulate Deposition in the Lungs , 2005, The International journal of artificial organs.

[9]  T. Heistracher,et al.  Flow and deposition patterns in successive airway bifurcations , 1997 .

[10]  Ted B Martonen,et al.  Three-dimensional computational fluid dynamics simulations of particle deposition in the tracheobronchial tree. , 2006, Journal of aerosol medicine : the official journal of the International Society for Aerosols in Medicine.

[11]  Y Liu,et al.  Modeling the bifurcating flow in an asymmetric human lung airway. , 2003, Journal of biomechanics.

[12]  Charles Hirsch,et al.  Anatomically based three-dimensional model of airways to simulate flow and particle transport using computational fluid dynamics. , 2005, Journal of applied physiology.

[13]  D. Fisher,et al.  Deposition Characteristics of Aerosol Particles in Sequentially Bifurcating Airway Models , 1999 .

[14]  Clement Kleinstreuer,et al.  Cyclic micron-size particle inhalation and deposition in a triple bifurcation lung airway model , 2002 .

[15]  Y Liu,et al.  Modeling the bifurcating flow in a human lung airway. , 2002, Journal of biomechanics.

[16]  Thomas Heistracher,et al.  Computation of local enhancement factors for the quantification of particle deposition patterns in airway bifurcations , 1999 .

[17]  E. Weibel Morphometry of the Human Lung , 1965, Springer Berlin Heidelberg.

[18]  C. S. Kim,et al.  Deposition of Inhaled Particles in Bifurcating Airway Models: I. Inspiratory Deposition , 1989 .

[19]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .