Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. III. Longitudinal (0°) Compressive Properties of Graphite/Epoxy Composites

An experimental investigation was performed to quantify the relationship between fiber-matrix adhesion as determined by single fiber interfacial shear strength tests with the compressive properties and failure modes of unidirectional graphite/epoxy com posites. The compression tests were conducted on three identical sets of composites differ ing only in their fiber-matrix interfacial shear strength. The interfacial shear strength was varied by using the same graphite fibers with different surface treatments, namely un treated, surface treated, and surface treated and coated with a thin layer of epoxy. The sur face treatment changed the interfacial shear strength by more than a factor of two, while the properties of the fibers remained unchanged. The experimental results show that the fiber surface treatment affects the compressive modulus only marginally. However, the compressive strength and maximum compressive strain were highly sensitive to the fiber surface treatment. Both the strength and maximum strain increased with the interfacial shear strength. The fracture surface analysis revealed that when the fiber-matrix inter facial shear strength was low the compressive failure occurred due to delamination and global delamination buckling. At intermediate values of the interfacial shear strength, the compressive failure occurred due to shear failure driven by inphase microbuckling of fibers. The composites having the highest values of the interfacial shear strength yielded "stepped" fracture surfaces showing compressive failure of fibers in several planes perpen dicular to the fiber axis.

[1]  N. L. Hancox,et al.  The compression strength of unidirectional carbon fibre reinforced plastic , 1975 .

[2]  D. H. Woolstencroft,et al.  A comparison of test techniques used for the evaluation of the unidirectional compressive strength of carbon fibre-reinforced plastic , 1981 .

[3]  D. Purslow,et al.  The effect of environment on the compression strength of notched CFRP — a fractographic investigation , 1984 .

[4]  L. Drzal,et al.  Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: I. Inplane and Interlaminar Shear Behavior of Graphite/Epoxy Composites , 1991 .

[5]  H. T. Hahn,et al.  Buckling of a fiber bundle embedded in epoxy , 1986 .

[6]  Guk-Rwang Won.  American Society for Testing and Materials , 1987 .

[7]  L. Drzal,et al.  Adhesion of Graphite Fibers to Epoxy Matrices: I. The Role of Fiber Surface Treatment , 1983 .

[8]  L. Drzal,et al.  Adhesion of Graphite Fibers to Epoxy Matrices: II. The Effect of Fiber Finish , 1983 .

[9]  Leif A. Carlsson,et al.  Experimental characterization of advanced composite materials , 1987 .

[10]  H. Thomas Hahn,et al.  Compression Failure Mechanisms in Unidirectional Composites , 1986 .

[11]  W. B. Lisagor,et al.  Compression testing of graphite/epoxy composite materials , 1981 .

[12]  Cc Chamis,et al.  Longitudinal Compressive Failure Modes in Fiber Composites: End Attachment Effects on IITRI Type Test Specimens , 1985 .

[13]  Ke Hofer,et al.  A New Static Compression Fixture for Advanced Composite Materials , 1977 .

[14]  Cc Chamis,et al.  Compressive Behavior of Unidirectional Fibrous Composites , 1983 .

[15]  Lawrence T. Drzal,et al.  Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: II. Longitudinal (0°) and Transverse (90°) Tensile and Flexure Behavior of Graphite/Epoxy Composites , 1991 .

[16]  L. Drzal,et al.  On the Determination of Fiber Strengths by In-Situ Fiber Strength Testing , 1991 .

[17]  G. Springer,et al.  Effects of Moisture on the Compressive and Interlaminar Shear Strengths of Aramid-Epoxy Composites , 1988 .

[18]  G. Springer,et al.  Effects of Moisture and Temperature on the Compressive and Short Beam Shear Properties of Fiberite T300/976 Fabric , 1988 .