Monitoring of Bridges by a Laser Pointer: Dynamic Measurement of Support Rotations and Elastic Line Displacements: Methodology and First Test

Deck inclination and vertical displacements are among the most important technical parameters to evaluate the health status of a bridge and to verify its bearing capacity. Several methods, both conventional and innovative, are used for structural rotations and displacement monitoring; however, none of these allow, at the same time, precision, automation, static and dynamic monitoring without using high cost instrumentation. The proposed system uses a common laser pointer and image processing. The elastic line inclination is measured by analyzing the single frames of an HD video of the laser beam imprint projected on a flat target. For the image processing, a code was developed in Matlab® that provides instantaneous rotation and displacement of a bridge, charged by a mobile load. An important feature is the synchronization of the load positioning, obtained by a GNSS receiver or by a video. After the calibration procedures, a test was carried out during the movements of a heavy truck maneuvering on a bridge. Data acquisition synchronization allowed us to relate the position of the truck on the deck to inclination and displacements. The inclination of the elastic line at the support was obtained with a precision of 0.01 mrad. The results demonstrate the suitability of the method for dynamic load tests, and the control and monitoring of bridges.

[1]  Derek D. Lichti,et al.  Modeling Terrestrial Laser Scanner Data for Precise Structural Deformation Measurement , 2007 .

[2]  DA Dick Hordijk,et al.  State-of-the-art on load testing of concrete bridges , 2017 .

[3]  Hyun Myung,et al.  Vision-based displacement measurement method for high-rise building structures using partitioning approach , 2010 .

[4]  Pizhong Qiao,et al.  Vibration-based Damage Identification Methods: A Review and Comparative Study , 2011 .

[5]  Wai-Fah Chen,et al.  Handbook of Structural Engineering , 1997 .

[6]  Serena Artese,et al.  Geomatics activities for monitoring the large landslide of Maierato, Italy , 2015 .

[7]  Jung-Yeol Kim,et al.  Development of a wireless sensor network system for suspension bridge health monitoring , 2012 .

[8]  Steffen Marx,et al.  Load Testing of Concrete Structures in Germany – General Practice and Recent Developments , 2018 .

[9]  Hyun Myung,et al.  Structural health monitoring robot using paired structured light , 2009, 2009 IEEE International Symposium on Industrial Electronics.

[10]  Yan Yu,et al.  BRIDGE DEFLECTION MEASUREMENT USING WIRELESS MEMS INCLINATION SENSOR SYSTEMS , 2013 .

[11]  Mingchu Li,et al.  Bridge Displacement Monitoring Method Based on Laser Projection-Sensing Technology , 2015, Sensors.

[12]  Artur Janowski,et al.  The Geodetic Monitoring of the Engineering Structure – A Practical Solution of the Problem in 3D Space , 2016 .

[13]  Artur Janowski,et al.  Remote sensing and photogrammetry techniques in diagnostics of concrete structures , 2016 .

[14]  Hojjat Adeli,et al.  A New Approach for Health Monitoring of Structures: Terrestrial Laser Scanning , 2007, Comput. Aided Civ. Infrastructure Eng..

[15]  Satoru Yoneyama,et al.  Bridge Deflection Measurement Using Digital Image Correlation with Camera Movement Correction , 2012 .

[16]  Robert B. Fisher,et al.  A Comparison of Algorithms for Subpixel Peak Detection , 1996 .

[17]  Werner Lienhart,et al.  High frequent total station measurements for the monitoring of bridge vibrations , 2017 .

[18]  Marek Wazowski,et al.  Bridge Load Tests in Poland Today and Tomorrow – The Standard and the New Ways in Measuring and Research to Ensure Transport Safety , 2017 .

[19]  Serena Artese,et al.  POIS, a Low Cost Tilt and Position Sensor: Design and First Tests , 2015, Sensors.

[20]  Ping Zhu,et al.  Experimental assessment of high sampling-rate robotic total station for monitoring bridge dynamic responses , 2017 .

[21]  Jong-Jae Lee,et al.  A Vision-Based Dynamic Rotational Angle Measurement System for Large Civil Structures , 2012, Sensors.

[22]  Gérard Lachapelle,et al.  Dynamic Deformation Monitoring of Tall Structure Using GPS Technology , 1995 .

[23]  Mehrisadat Makki Alamdari,et al.  A spectral-based clustering for structural health monitoring of the Sydney Harbour Bridge , 2017 .

[24]  Debra F. Laefer,et al.  Using Terrestrial Laser Scanning for Dynamic Bridge Deflection Measurement , 2014 .

[25]  Antonio Quintela Incera,et al.  Fiber Optic Sensors in Structural Health Monitoring , 2011, Journal of Lightwave Technology.

[26]  Lei Yang,et al.  Identification of dynamic displacements and modal frequencies of a medium-span suspension bridge using multimode GNSS processing , 2014 .

[27]  Eugene J. O'Brien,et al.  A Review of Indirect Bridge Monitoring Using Passing Vehicles , 2015 .

[28]  Zhengyou Zhang,et al.  A Flexible New Technique for Camera Calibration , 2000, IEEE Trans. Pattern Anal. Mach. Intell..

[29]  Wei Lu,et al.  Structural displacement and strain monitoring based on the edge detection operator , 2017 .

[30]  Ivan Detchev,et al.  Precise Photogrammetric Reconstruction Using Model-Based Image Fitting for 3D Beam Deformation Monitoring , 2013 .

[31]  Jong-Jae Lee,et al.  Rotational Angle Measurement of Bridge Support Using Image Processing Techniques , 2016, J. Sensors.

[32]  Alan Dodson,et al.  Integrating a Global Positioning System and Accelerometers to Monitor the Deflection of Bridges , 2004 .

[33]  Hao Ye,et al.  Measurement of Bridge Dynamic Responses Using Network-Based Real-Time Kinematic GNSS Technique , 2016 .

[34]  Raffaele Zinno,et al.  A mixed isostatic 16 dof quadrilateral membrane element with drilling rotations, based on Airy stresses , 2014 .

[35]  Hyun Myung,et al.  A paired visual servoing system for 6-DOF displacement measurement of structures , 2011 .

[36]  Chunxiao Tang,et al.  The design of a laser-based digital displacement/deflection measurement system of a remote object and its calibration , 2008, SPIE/COS Photonics Asia.