Concept and Feasibility of One-Embedded System Payload Including Baseband Communication

Traditional approach of payload design develops modules separately such as control, compression and communication. Due to increasing demand of shorter development cycles and lower cost, we shall develop a highly adaptive approach for payload implementation so that we can update it in a short time according to the need of a new mission. Besides, the optimization of payload performance and communication link together becomes possible. Based on these, we propose a “one-embedded system” payload approach. All the control, file management, processing such as compression, and communications are implemented in one built-in embedded system. In other words, after the sensor signal is converted as digital data (after ADC, analog-to-digital-converter), the data gets into the proposed embedded system. And the system “does everything” and then outputs data to DAC (digital-to-analog-converter) and then transmitted it in analog form. The proposed embedded system includes a FPGA implementing a processor IP. Due to the programmable characteristic of FPGA, hardware interfaces can be adjusted quickly according to various mission requirements. Besides, because of the flexibility and adaptability of software, code can be updated to optimize performance according to various tasks during flight. In this work, we provide concept, guideline of optimization, structure, feasibility, benefits and risks of one-embedded system payload approach. An example of implementation for optical remotes sensing payload including interfaces will be investigated.