Thin Film Deposition Methods for CuInSe 2 Solar Cells
暂无分享,去创建一个
[1] C. S. Fuller,et al. A New Silicon p‐n Junction Photocell for Converting Solar Radiation into Electrical Power , 1954 .
[2] Franz Karg,et al. Development and manufacturing of CIS thin film solar modules , 2001 .
[3] F. Ouchen,et al. CuInSe2 thin films grown by MOCVD: characterization, first devices , 1998 .
[4] M. E. Calixto,et al. Depth profile analysis of CuInSe2 (CIS) thin films grown by the electrodeposition technique , 2000 .
[5] C. Guillén,et al. CuInSe2 thin films obtained by a novel electrodeposition and sputtering combined method , 2000 .
[6] L. Kronik,et al. Interface redox engineering of Cu(In,Ga)Se2 – based solar cells: oxygen, sodium, and chemical bath effects ☆ , 2000 .
[7] S. N. Sahu,et al. Electrodeposition of CuInSe2 thin films from aqueous solution , 1989 .
[8] K. Knapp,et al. Empirical investigation of the energy payback time for photovoltaic modules , 2001 .
[9] K. Granath,et al. The effect of NaF on Cu(In, Ga)Se2 thin film solar cells , 2000 .
[10] H. Schock,et al. Indium-Based Interface Chemical Engineering by Electrochemistry and Atomic Layer Deposition for Copper Indium Diselenide Solar Cells , 2001 .
[11] P. Garg,et al. Growth and characterization of electrodeposited CuInSe2 thin films from seleno-sulphate solution , 1991 .
[12] Rommel Noufi,et al. Optimization of CBD CdS process in high-efficiency Cu(In, Ga)Se2-based solar cells , 2002 .
[13] K. Fezzaa,et al. One step electrodeposition of CuInSe2: Improved structural, electronic, and photovoltaic properties by annealing under high selenium pressure , 1996 .
[14] R. Noufi,et al. Characterizations of electrodeposited CuInSe2 thin films: Structure, deposition and formation mechanisms , 1991 .
[15] G. Maurin,et al. Preparation of polycrystalline thin films of CuInSe2 by electrodeposition , 1989 .
[16] J. Fulghum,et al. Na impurity chemistry in photovoltaic CIGS thin films: Investigation with x-ray photoelectron spectroscopy , 1997 .
[17] D. Lincot,et al. Cadmium-free buffer layers deposited by atomic later epitaxy for copper indium diselenide solar cells , 2000 .
[18] S. Nishiwaki,et al. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells , 2001 .
[19] H. Zogg,et al. Light soaking effects in Cu(In,Ga)Se2 superstrate solar cells , 2003 .
[20] T. Moriarty,et al. The performance of CuIn1−xGaxSe2-based photovoltaic cells prepared from low-cost precursor films , 2000 .
[21] S. Shirakata,et al. Properties of Cu(In, Ga)Se_2 Thin Films Prepared by Chemical Spray Pyrolysis , 1999 .
[22] Robert W. Birkmire,et al. Compound polycrystalline solar cells:: Recent progress and Y2 K perspective , 2001 .
[23] E. Bacaksız,et al. Production of CuInSe2 thin films by a sequential processes of evaporations and selenization , 1999 .
[24] S. Kim,et al. Growth of CuInSe2 thin films by high vapour Se treatment of co-sputtered Cu-In alloy in a graphite container , 1999 .
[25] A. D. Cunha,et al. A voltammetric study of the electrodeposition of CuInSe2 in a citrate electrolyte , 2002 .
[26] U. Rau,et al. Classification of metastabilities in the electrical characteristics of ZnO/CdS/Cu(In,Ga)Se2 solar cells , 2001 .
[27] A. Swartzlander,et al. Studies on sulfur diffusion into Cu(In,Ga)Se2 thin films , 2000 .
[28] P. Berwian,et al. In situ resistivity measurements of precursor reactions in the Cu–In–Ga system , 2003 .
[29] Remo Guidieri. Res , 1995, RES: Anthropology and Aesthetics.
[30] I. Parkin,et al. Characterisation of the photocatalyst Pilkington Activ (TM): a reference film photocatalyst? , 2003 .
[31] M. Lux‐Steiner,et al. Cd-free buffer layers for CIGS solar cells prepared by a dry process , 2002 .
[32] M. Ganchev,et al. Preparation and structure of annealed CuInSe2 electrodeposited films , 1997 .
[33] J. R. Botha,et al. Properties of CuIn(Se,S)2 thin films prepared by two-step growth processes , 2003 .
[34] J. Nagaraju,et al. Pulsed excimer laser ablated copper indium diselenide thin films , 2000 .
[35] Lars Stolt,et al. A novel cadmium free buffer layer for Cu(In,Ga)Se2 based solar cells , 1996 .
[36] M. Konagai,et al. Cu(InGa)Se2 Thin-film Solar Cells with High Resistivity ZnO Buffer Layers Deposited by Atomic Layer Deposition , 1999 .
[37] H. Minoura,et al. Electrodeposition of CuInSe2 films from a sulphate bath , 1990 .
[38] M. Ritala,et al. One‐Step Electrodeposition of Cu2 − x Se and CuInSe2 Thin Films by the Induced Co‐deposition Mechanism , 2000 .
[39] Uwe Rau,et al. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells–recent achievements, current understanding, and future challenges , 1999 .
[40] D. Balzar,et al. Growth and characterization of large area Cu(In, Ga)Se2 films , 2001 .
[41] M. Powalla,et al. Sodium co-evaporation for low temperature Cu(In,Ga)Se2 deposition , 2001 .
[42] C. Guillén,et al. Structure, morphology and photoelectrochemical activity of CuInSe2 thin films as determined by the characteristics of evaporated metallic precursors , 2002 .
[43] M. P. R. Panicker,et al. Cathodic Deposition of CdTe from Aqueous Electrolytes , 1978 .
[44] C. X. Qiu,et al. Study of CuInSe2 thin films prepared by electrodeposition , 1995 .
[45] H. Zogg,et al. Comparison of structural and electrical properties of Cu(In, Ga)Se2 for substrate and superstrate solar cells , 2002 .
[46] K. C. Sharma,et al. Characterization of p-CuInSe2 films for photovoltaics grown by a chemical deposition technique , 1988 .
[47] E. Bucher,et al. Phase separation and compositional changes in two-stage processed chalcopyrite thin films , 2001 .
[48] C. Guillén,et al. Comparative studies between Cu-Ga-Se and Cu-In-Se thin film systems , 2002 .
[49] Philip A. Jones,et al. The plasma enhanced chemical vapour deposition of CuInSe2 , 1994 .
[50] K. Kushiya,et al. Progress in large-area Cu(InGa)Se2-based thin-film modules with a Zn(O,S,OH)x buffer layer , 2001 .
[51] H. Schock,et al. Influence of the selenium flux on the growth of Cu(In,Ga)Se2 thin films , 2003 .
[52] R. J. Mccurdy,et al. Float Line Deposited Transparent Conductors -Implications for the Pv Industry , 1996 .
[53] C. Monty,et al. Morphology of Cu(In,Ga)Se2 thin films grown by close-spaced vapor transport from sources with different grain sizes , 2002 .
[54] F. Ouchen,et al. Growth of CuInSe2 by metallorganic chemical vapour deposition (MOCVD): new copper precursor , 1996 .
[55] T. Nakada,et al. Direct evidence of Cd diffusion into Cu(In, Ga)Se2 thin films during chemical-bath deposition process of CdS films , 1999 .
[56] M. Ganchev,et al. Investigation of the electrodeposition process in the Cu-In-Se system , 1993 .
[57] P. Hagenmuller,et al. THERMODYNAMICS OF METAL COMPLEX FORMATION IN AQUEOUS SOLUTION. XII. EQUILIBRIUM MEASUREMENTS ON THE COPPER(I) BROMIDE, IODIDE AND THIOCYANATE SYSTEMS , 1978 .
[58] V. Alberts,et al. Preparation of device quality chalcopyrite thin films by thermal evaporation of compound materials , 2002 .
[59] V. Alberts,et al. Properties of flash evaporated chalcopyrite absorber films and solar cells , 2001 .
[60] H. Schock,et al. The role of structural properties and defects for the performance of Cu-chalcopyrite-based thin-film solar cells , 2001 .
[61] Bulent M. Basol,et al. Low cost techniques for the preparation of Cu(In,Ga)(Se,S) 2 absorber layers , 2000 .
[62] David Cahen,et al. Effects of Sodium on Polycrystalline Cu(In,Ga)Se2 and Its Solar Cell Performance , 1998 .
[63] K. Kushiya. Improvement of electrical yield in the fabrication of CIGS-based thin-film modules , 2001 .
[64] M. E. Calixto,et al. CuInSe2 thin films formed by selenization of Cu–In precursors , 1998 .
[65] T. Negami,et al. Use of diethylselenide as a less-hazardous source for preparation of CuInSe2 photo-absorbers by selenization of metal precursors , 2002 .
[66] M. Ritala,et al. Electrochemical quartz crystal microbalance study of the electrodeposition mechanisms of Cu2−xSe thin films , 2000 .
[67] M. Bär,et al. ILGAR‐ZnO Window Extension Layer: an adequate substitution of the conventional CBD‐CdS buffer in Cu(In,Ga) (S,Se)2‐based solar cells with superior device performance , 2002 .
[68] C. Guillén,et al. New approaches to obtain CuIn1−xGaxSe2 thin films by combining electrodeposited and evaporated precursors , 1998 .
[69] Rommel Noufi,et al. Properties of ZnO/CdS/CuInSe2 solar cells with improved performance , 2004 .
[70] J. Abushama,et al. Improved performance in ZnO/CdS/CuGaSe2 thin‐film solar cells , 2003 .
[71] Martin A. Green,et al. Recent developments in photovoltaics , 2004 .
[72] J. M. Merino,et al. Flash evaporation of chalcogenide thin films , 2000 .
[73] K. Kushiya,et al. Stabilization of PN Heterojunction between Cu(InGa)Se2 Thin-Film Absorber and ZnO Window with Zn(O, S, OH)x Buffer , 2000 .
[74] A. Ennaoui,et al. Influence of citrate ions as complexing agent for electrodeposition of CuInSe2 thin films , 2001 .
[75] A. Yamada,et al. Polycrystalline Cu(InGa)Se2 Thin-Film Solar Cells with ZnSe Buffer Layers , 1995 .
[76] R. Klenk. Characterisation and modelling of chalcopyrite solar cells , 2001 .
[77] Y. Ohtake. Improved performance of Cu(InGa)Se2 thin-film solar cells using evaporated Cd-free buffer layers , 1997 .
[78] Aloysius F. Hepp,et al. Single Source Precursors for Fabrication of I-III-VI2 Thin-film Solar Cells via Spray CVD , 2003 .
[79] Electrodeposition of CuInSe 2 and doped ZnO thin films for solar cells , 2003 .
[80] J. Werner,et al. Radiation resistance of Cu(In,Ga)Se2 solar cells under 1-MeV electron irradiation , 2001 .
[81] P. K. Datta,et al. Detection of Crystalline Phases in CuInSe2 Films Grown by Selenisation Process , 2000 .
[82] M. Nishitani,et al. Stability of Cu(In,Ga)Se2 solar cells and evaluation by C–V characteristics , 1998 .
[83] D. Cahen,et al. Defect chemical explanation for the effect of air anneal on CdS/CuInSe2 solar cell performance , 1989 .
[84] A. Garg,et al. Structural Properties and Growth Mechanism of Copper and Indium Selenide Films Prepared by Electrochemical Selenization of Metal Layers , 1994 .
[85] S. Lin,et al. Large Grain Copper Indium Diselenide Films , 1984 .
[86] P. J. Sebastian,et al. Deposition of smooth Cu(In,Ga)Se2 films from binary multilayers , 2000 .
[87] H. Fritz,et al. A new electrochemical method for selenization of stacked CuIn layers and preparation of CuInSe2 by thermal annealing , 1994 .
[88] F. A. Kröger. Cathodic Deposition and Characterization of Metallic or Semiconducting Binary Alloys or Compounds , 1978 .
[89] H. Schock,et al. Depth profile of the lattice constant of the Cu-poor surface layer in (Cu , 2003 .
[90] W. Shafarman,et al. Determination of activation barriers for the diffusion of sodium through CIGS thin‐film solar cells , 2003 .
[91] M. Ritala,et al. Electrochemical preparation of In and Al doped zno thin films for CuInSe2 solar cells , 2003 .
[92] R. Córdova,et al. Electrodeposition of CuInSe2 thin films in a glycine acid medium , 1999 .
[93] R. Reineke-Koch,et al. Large area electrodeposition of Cu(In,Ga)Se2 , 2000 .
[94] Daniel Lincot,et al. Electrochemical deposition of zinc oxide films from non-aqueous solution: a new buffer/window process for thin film solar cells , 2000 .
[95] A. Ashour,et al. Structural study of flash evaporated CuInSe2 thin films , 2001 .
[96] D. Lincot,et al. Chemical elaboration of well defined Cu(In,Ga)Se2 surfaces after aqueous oxidation etching , 2003 .
[97] H. Schock,et al. Electrical characterization of Cu(In, Ga)Se2 thin-film solar cells and the role of defects for the device performance , 2001 .
[98] C. Guillén,et al. Effects of Thermal and Chemical Treatments on the Composition and Structure of Electrodeposited CuInSe2 Thin Films , 1994 .
[99] C. X. Qiu,et al. Investigation of electrodeposited CuInSe2 films , 1987 .
[100] Daniel Lincot,et al. High‐efficiency copper indium gallium diselenide (CIGS) solar cells with indium sulfide buffer layers deposited by atomic layer chemical vapor deposition (ALCVD) , 2003 .
[101] U. Rau,et al. Compositional trends of defect energies, band alignments, and recombination mechanisms in the Cu(In,Ga)(Se,S)2 alloy system , 2003 .
[102] W. Shafarman,et al. Effect of substrate temperature and depostion profile on evaporated Cu(InGa)Se2 films and devices , 2000 .
[103] Adolf Goetzberger,et al. Solar cells: past, present, future , 2002 .
[104] M. Ritala,et al. Electrochemical Quartz Crystal Microbalance Study of the Electrodeposition Mechanisms of CuInSe2 Thin Films , 2001 .
[105] D. Schmid,et al. Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe2 , 1993 .
[106] Andrew G. Glen,et al. APPL , 2001 .
[107] E. M. Gordon,et al. Electrodeposited CdS on CIS pn junctions , 1999 .
[108] R. Tscharner,et al. Photovoltaic technology: the case for thin-film solar cells , 1999, Science.
[109] A. Dikusar,et al. Electrodeposition of CuInSe2 thin films from aqueous citric solutions II. Investigation of macrokinetics of electrodeposition by means of rotating disk electrode , 1994 .
[110] K. Kushiya,et al. Performance improvement of CIGS-based modules by depositing high-quality Ga-doped ZnO windows with magnetron sputtering , 2001 .
[111] Lars Stolt,et al. ZnO/CdS/CuInSe2 thin‐film solar cells with improved performance , 1993 .
[112] S. Nishiwaki,et al. Cu(In,Ga)Se2 thin-film solar cells with an efficiency of 18% , 2001 .
[113] A. Ennaoui,et al. High-efficiency Cd-free CIGSS thin-film solar cells with solution grown zinc compound buffer layers , 2001 .
[114] Rommel Noufi,et al. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin‐film solar cells , 1999 .
[115] N. F. Cooray,et al. Large area ZnO films optimized for graded band-gap Cu(InGa)Se2-based thin-film mini-modules , 1997 .
[116] P. J. Sebastian,et al. Fundamental studies on large area Cu(In,Ga)Se2 films for high efficiency solar cells , 2001 .
[117] N. Kohara,et al. Chemical bath deposition of Cds buffer layer for GIGS solar cells , 1998 .
[118] M. Witcomb,et al. Influence of selenization techniques on the reaction kinetics of chalcopyrite thin films , 2001 .
[119] M. Ritala,et al. Electrodeposition of PbTe thin films , 1998 .
[120] T. Nakada,et al. Improved Jsc in CIGS thin film solar cells using a transparent conducting ZnO:B window layer , 2001 .
[121] P. Prosini,et al. Electrodeposition of copper-indium alloy under diffusion-limiting current control , 1996 .
[122] R. Klenk,et al. PREPARATION OF HOMOGENEOUS CU(INGA)SE2 FILMS BY SELENIZATION OF METAL PRECURSORS IN H2SE ATMOSPHERE , 1995 .
[123] A. Rockett,et al. Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances , 2000 .
[124] Brian E. McCandless,et al. Device and material characterization of Cu(InGa)Se2 solar cells with increasing band gap , 1996 .
[125] M. Pourbaix. Atlas of Electrochemical Equilibria in Aqueous Solutions , 1974 .
[126] U. Rau,et al. Electronic properties of ZnO/CdS/Cu(In,Ga)Se2 solar cells — aspects of heterojunction formation , 2001 .
[127] M. Contreras,et al. Texture manipulation of CuInSe2 thin films , 2000 .
[128] D. Schmid,et al. A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures , 1994 .
[129] Jerry D. Harris,et al. A new facile route for the preparation of single-source precursors for bulk, thin-film, and nanocrystallite I-III-VI semiconductors. , 2003, Inorganic chemistry.
[130] J. Zank,et al. Electrochemical codeposition of indium and gallium for chalcopyrite solar cells , 1996 .
[131] Robert M. Smith,et al. NIST Critically Selected Stability Constants of Metal Complexes Database , 2004 .
[132] Su-Huai Wei,et al. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties , 1998 .
[133] H. Schock,et al. Study of the effect of gallium grading in Cu(In,Ga)Se2 , 2000 .
[134] M. Martínez,et al. Chemistry of CdS / CuInSe2 Structures as Controlled by the CdS Deposition Bath , 2001 .
[135] Wolfgang Riedl,et al. Rapid CIS-process for high efficiency PV-modules: development towards large area processing , 2001 .
[136] H. Schock,et al. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se2 , 2001 .
[137] Uwe Rau,et al. Defect generation in Cu(In,Ga)Se2 heterojunction solar cells by high-energy electron and proton irradiation , 2001 .
[138] H. Lee,et al. Preparation of CuIn(S, Se)2 thin films by thermal crystallization in sulfur and selenium atmosphere , 2003 .
[139] C. M. Joseph,et al. Electrical, optical and structural properties of binary phase free CuInSe2 thin films , 2001 .
[140] S. Nomura,et al. Preparation of CuInSe 2 Thin Films on Mo-Coated Glass Substrates by Pulse-Plated Electrodeposition , 1998 .
[141] Pandey. Handbook of semiconductor electrodeposition , 1996 .
[142] B. Stanbery. Copper Indium Selenides and Related Materials for Photovoltaic Devices , 2002 .
[143] Martin A. Green,et al. Solar cell efficiency tables (version 22) , 2003 .
[144] B. Ahn,et al. Fabrication of CuInSe2 films and solar cells by the sequential evaporation of In2Se3 and Cu2Se binary compounds , 2001 .
[145] R. Klenk,et al. Efficient thin-film solar cells prepared by a sequential process , 1998 .
[146] W. Kemp,et al. Ionizing radiation effects in copper indium gallium diselenide thin-film solar cells , 2002 .
[147] Electrodeposition of CuInSe2 and doped ZnO thin films for solar cells , 2003 .
[148] Robert W. Birkmire,et al. POLYCRYSTALLINE THIN FILM SOLAR CELLS:Present Status and Future Potential , 1997 .
[149] M. Bodegård,et al. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance , 2003 .
[150] C. Eberspacher,et al. Thin-film CIS alloy PV materials fabricated using non-vacuum, particles-based techniques , 2001 .
[151] M. Konagai,et al. Preferred Orientation Control of Cu(In1-xGax)Se2 (x ≈0.28) Thin Films and Its Influence on Solar Cell Characteristics , 2002 .
[152] B. Ahn,et al. Effect of CuIn3Se5 layer thickness on CuInSe2 thin films and devices , 1998 .
[153] A. Kylner. Effect of impurities in the CdS buffer layer on the performance of the Cu(In, Ga)Se2 thin film solar cell , 1999 .
[154] H. Hwang,et al. Steps toward industrialization of Cu-III-VI2 thin-film solar cells: a novel full in-line concept , 2003 .
[155] Hans Zogg,et al. CIS and CIGS layers from selenized nanoparticle precursors , 2003 .
[156] J. Werner,et al. Back surface band gap gradings in Cu(In, Ga)Se2 solar cells , 2001 .
[157] M. Al‐Jassim,et al. Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films , 1997 .
[158] R. C. Weast. CRC Handbook of Chemistry and Physics , 1973 .
[159] S. Sanchez,et al. Cathodic deposition of copper selenide films on tin oxide in sulfate solutions , 1993 .
[160] Nandu B. Chaure,et al. Electrodeposition of p–i–n type CuInSe2 multilayers for photovoltaic applications , 2004 .
[161] L. Kronik,et al. Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devices , 1999 .
[162] C. Bostedt,et al. LOCALIZATION OF NA IMPURITIES AT THE BURIED CDS/CU(IN, GA)SE2 HETEROJUNCTION , 1999 .
[163] Omar Isaac Asensio,et al. Non-vacuum processing of CuIn1−xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks , 2003 .
[164] U. Rau,et al. Fermi level pinning at CdS/Cu(In,Ga)(Se,S)2 interfaces: effect of chalcopyrite alloy composition , 2003 .
[165] A. Zunger,et al. A phenomenological model for systematization and prediction of doping limits in II–VI and I–III–VI2 compounds , 1998 .
[166] C. Lokhande. Pulse plated electrodeposition of CuInSe/sub 2/ films , 1987 .
[167] AbuBakr S. Bahaj,et al. Means of enhancing and promoting the use of solar energy , 2002 .
[168] H. Ogawa,et al. Optical and electrical properties of flash-evaporated amorphous CuInSe2 films , 2000 .
[169] Vasilis Fthenakis,et al. Toxicity of cadmium telluride, copper indium diselenide, and copper gallium diselenide , 1999 .
[170] A. Goetzberger,et al. Photovoltaic materials, history, status and outlook , 2003 .
[171] H. Schock,et al. Electronic loss mechanisms in chalcopyrite based heterojunction solar cells , 2000 .
[172] Jean-François Guillemoles,et al. Stability Issues of Cu(In,Ga)Se2-Based Solar Cells , 2000 .
[173] K. Granath,et al. Growth of Cu(In,Ga)Se2 thin films by coevaporation using alkaline precursors , 2000 .
[174] A. Rockett,et al. Diffusion of indium and gallium in Cu(In,Ga)Se2 thin film solar cells , 2003 .
[175] M. Ritala,et al. Electrodeposition of lead selenide thin films , 1998 .
[176] M. Yamaguchi. Radiation resistance of compound semiconductor solar cells , 1995 .
[177] B. Basol,et al. CIS film growth by metallic ink coating and selenization , 2000 .
[178] N. Kohara,et al. Preparation and characterization of Cu(In1−xGax)3Se5 thin films , 1995 .
[179] Rommel Noufi,et al. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin‐film solar cells , 2003 .
[180] J. Sites,et al. 15.4% CuIn1−xGaxSe2-based photovoltaic cells from solution-based precursor films , 2000 .
[181] H. Zogg,et al. Effects of NaF coevaporation on structural properties of Cu(In, Ga)Se2 thin films , 2003 .
[182] S. Chaudhuri,et al. CuIn(SxSe1−x)2 films prepared by graphite box annealing of In/Cu stacked elemental layers , 2001 .
[183] David J. Williams,et al. The synthesis, X-ray structures and CVD studies of some group 11 complexes of iminobis(diisopropylphosphine selenides) and their use in the deposition of I/III/VI photovoltaic materials , 2004 .
[184] J. M. Stewart,et al. Structure and properties of high efficiency ZnO/CdZnS/CuInGaSe/sub 2/ solar cells , 1990 .
[185] A. Dikusar,et al. Electrodeposition of CuInSe2 thin films from aqueous citric solutions I. Influence of potential and mass transfer rate on composition and structure of films , 1994 .
[186] W. Eccleston,et al. Mater. Res. Soc. Symp. Proc. , 2006 .
[187] L. Kazmerski,et al. Electroplated CuInS2 and CuInSe2 layers: Preparation and physical and photovoltaic characterization , 1985 .
[188] A. Rockett,et al. Na incorporation in Mo and CuInSe2 from production processes , 1999 .
[189] S. Nishiwaki,et al. High-efficiency CIGS solar cells with modified CIGS surface , 2001 .
[190] L. Stolt,et al. Cu(In,Ga)Se2 thin films grown with a Cu‐poor/rich/poor sequence: growth model and structural considerations , 2003 .
[191] C. Bostedt,et al. Observation of intermixing at the buried CdS/Cu(In, Ga)Se2 thin film solar cell heterojunction , 1999 .
[192] K. Jain,et al. Growth phases during electrochemical selenization of vacuum deposited CuIn metal layers for the formation of semiconducting CuInSe2 films , 1999 .
[193] Christopher Hebling,et al. Photovoltaic materials, past, present, future , 2000 .
[194] D. B. Holt,et al. The structure of epitaxial films of ZnS evaporated onto NaCl in a vacuum , 1970 .
[195] K. Ramanathan,et al. CuIn1−xGaxSe2-based photovoltaic cells from electrodeposited and chemical bath deposited precursors , 1998 .
[196] S. Kuranouchi,et al. Annealing effects of CuInSe2 films prepared by pulsed laser deposition , 1999 .
[197] S. Siebentritt. Wide gap chalcopyrites: material properties and solar cells , 2002 .
[198] Y. Hashimoto,et al. Production technology for CIGS thin film solar cells , 2002 .
[199] C. X. Qiu,et al. ZnO/CdS/CuInSe2 photovoltaic cells fabricated using chemical bath deposited CdS buffer layer , 1997 .
[200] Yasuhiko Sato,et al. Application of Zn-Compound Buffer Layer for Polycrystalline CuInSe2-Based Thin-Film Solar Cells , 1996 .
[201] J. Parisi,et al. Light induced changes in the electrical behavior of CdTe and Cu(In,Ga)Se2 solar cells , 2002 .
[202] H. Schock,et al. CIGS‐based solar cells for the next millennium , 2000 .
[203] R. K. Pandey,et al. Properties of CuInSe2 films prepared by the rapid thermal annealing technique , 1993 .
[204] Akio Kunioka,et al. Superstrate-Type Cu(In, Ga)Se2 Thin Film Solar Cells with ZnO Buffer Layers. , 1998 .
[205] L. Thouin,et al. Formation of copper indium diselenide by electrodeposition , 1994 .
[206] T. Nakada,et al. 18% Efficiency Cd-Free Cu(In, Ga)Se2 Thin-Film Solar Cells Fabricated Using Chemical Bath Deposition (CBD)-ZnS Buffer Layers , 2002 .
[207] Richard C. Alkire,et al. Advances in electrochemical science and engineering , 1990 .
[208] A. Ashida,et al. CuInSe2 thin films prepared by quasi-flash evaporation of In2Se3 and Cu2Se , 1994 .
[209] D. Lincot,et al. Chemical bath deposition of CdS buffer layer: prospects of increasing materials yield and reducing waste , 2001 .
[210] A. Zunger,et al. Defect physics of the CuInSe 2 chalcopyrite semiconductor , 1998 .
[211] B. Dimmler,et al. Scaling up issues of CIGS solar cells , 2000 .
[212] H. Schock,et al. Influence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films , 2000 .
[213] R. Bhattacharya. Solution Growth and Electrodeposited CuInSe2Thin Films , 1983 .
[214] A. Zunger,et al. Effects of Na on the electrical and structural properties of CuInSe2 , 1999 .
[215] A. Rockett,et al. Oxygen in Solution Grown CdS Films for Thin Film Solar Cells , 1996 .
[216] M. Kemmler,et al. The deposition of thin films of CuME2 by CVD techniques (M = In, Ga and E = S, Se) , 2003 .
[217] Bulent M. Basol,et al. Low cost methods for the production of semiconductor films for CuInSe2/CdS solar cells☆ , 1987 .
[218] Robert W. Birkmire,et al. CuInSe2 for photovoltaic applications , 1991 .
[219] H. Schock,et al. Wet treatment based interface engineering for high efficiency Cu(In,Ga)Se2 solar cells , 2000 .
[220] T. Ohshima,et al. Annealing Enhancement Effect by Light Illumination on Proton Irradiated Cu(In,Ga)Se2 Thin-Film Solar Cells , 2002 .
[221] J. M. Merino,et al. Composition effects on the crystal structure of CuInSe2 , 1996 .
[222] D. Lincot,et al. Chemical Deposition of Chalcogenide Thin Films from Solution , 1999 .
[223] Akio Kunioka,et al. Effects of Sodium on Cu(In, Ga)Se2-Based Thin Films and Solar Cells , 1997 .
[224] U. Rau,et al. Interdependence of absorber composition and recombination mechanism in Cu(In,Ga)(Se,S)2 heterojunction solar cells , 2002 .
[225] M. Ritala,et al. Effects of post-deposition treatments on the photoactivity of CuInSe2 thin films deposited by the induced co-deposition mechanism , 2001 .
[226] Jean-François Guillemoles,et al. CU(IN, GA)SE2 SOLAR CELLS : DEVICE STABILITY BASED ON CHEMICAL FLEXIBILITY , 1999 .