Advanced indium-tin oxide ceramics for sputtering targets

Indium-tin oxide (ITO) ceramic sputtering targets are widely used in formation of electrically conductive transparent thin films for electrodes in flat panel displays, solar cells, antistatic films and others, and which are commonly produced by a conventional dc magnetron sputtering process. The ceramic targets should be of high purity with a uniform microcrystalline structure and should possess high density and high electrical conductivity. In the present work, the challenges of the ceramic composition (e.g. the ratio of In2O3 and SnO2) and manufacturing are considered; they include the use of high quality starting materials, particularly In2O3 powders with respect to purity, morphology and sinterability, manufacturing routes and sintering process. Positive experience in the development and manufacturing of ITO ceramic planar sputtering targets using in-house prepared In2O3 powders is reported. ITO ceramic tiles with areas up to 1500–1700 cm2 and densities of 99+% of TD are manufactured. Physical properties of the ITO ceramics and sputtered films have been studied. (Less)

[1]  Harry J. Leamy,et al.  Vice-présidents , 1960, Revue Internationale de la Croix-Rouge.

[2]  Joon-Hyung Lee,et al.  Effect of Phase Transformation on the Densification of Coprecipitated Nanocrystalline Indium Tin Oxide Powders , 2002 .

[3]  P. A. Cox,et al.  Solid-state and surface chemistry of Sn-doped In2O3 ceramics , 1987 .

[4]  M. Scherer,et al.  Influence of manufacturing process of indium tin oxide sputtering targets on sputtering behavior , 1992 .

[5]  K. Utsumi,et al.  Low resistivity ITO film prepared using the ultra high density ITO target , 1998 .

[6]  I. Hamberg,et al.  Evaporated Sn‐doped In2O3 films: Basic optical properties and applications to energy‐efficient windows , 1986 .

[7]  M. Olsson,et al.  THIN FILMS ENGINEERING OF INDIUM TIN OXIDE: LARGE AREA FLAT PANEL DISPLAYS APPLICATION , 2006 .

[8]  T. Roisnel,et al.  Structural Studies of Tin-Doped Indium Oxide (ITO) and In4Sn3O12 , 1998 .

[9]  C. W. Griffin,et al.  Electrical conductivity, Seebeck coefficient, and structure of In2O3−SnO2 , 1986 .

[10]  Leo Brewer,et al.  High‐Temperature Vaporization Behavior of Oxides II. Oxides of Be, Mg, Ca, Sr, Ba, B, Al, Ga, In, Tl, Si, Ge, Sn, Pb, Zn, Cd, and Hg , 1987 .

[11]  David S. Ginley,et al.  Transparent Conducting Oxides , 2000 .

[12]  Yuzo Shigesato,et al.  Origin of characteristic grain-subgrain structure of tin-doped indium oxide films , 1995 .

[13]  G. Frank,et al.  Electrical properties and defect model of tin-doped indium oxide layers , 1982 .

[14]  P. R. Emtage,et al.  Physics of Thin Films , 2009 .

[15]  Yoshifumi Ota,et al.  Low resistivity indium–tin oxide transparent conductive films. II. Effect of sputtering voltage on electrical property of films , 1990 .

[16]  J. Wit,et al.  The high temperature behavior of In2O3 , 1975 .

[17]  M. W. Thompson,et al.  Microtopography of surfaces eroded by ion-bombardment , 1969 .