Incorporation of Shape Memory Alloy Actuators into Morphing Aerostructures

[1]  J. Van Humbeeck,et al.  High-temperature shape memory alloys: Some recent developments , 2004 .

[2]  Ephrahim Garcia,et al.  Defense Advanced Research Projects Agency – Smart Materials and Structures Demonstration Program Overview , 2004 .

[3]  Dimitris C. Lagoudas,et al.  Thermomechanical characterization of NiTiCu and NiTi SMA actuators: influence of plastic strains , 2000 .

[4]  Xin Lan,et al.  Fiber reinforced shape-memory polymer composite and its application in a deployable hinge , 2009 .

[5]  Dimitris C. Lagoudas,et al.  Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part III: evolution of plastic strains and two-way shape memory effect , 1999 .

[6]  Stefanie Reese,et al.  A finite element model for shape memory alloys considering thermomechanical couplings at large strains , 2009 .

[7]  D. Lagoudas,et al.  A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloy , 1996 .

[8]  Gangbing Song,et al.  Robust control of a shape memory alloy wire actuated flap , 2007 .

[9]  Dale M. Pitt,et al.  SAMPSON smart inlet design overview and wind tunnel test: II. Wind tunnel test , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Travis L. Turner,et al.  A New Thermoelastic Model for Analysis of Shape Memory Alloy Hybrid Composites , 2000 .

[11]  M. Morin,et al.  Influence of thermal cycling on the reversible martensitic transformation in a Cu-Al-Ni shape memory alloy , 1995 .

[12]  W. J. Buehler,et al.  Crystal Structure and a Unique ``Martensitic'' Transition of TiNi , 1965 .

[13]  Dimitris C. Lagoudas,et al.  Thermomechanical fatigue of shape memory alloys , 2009 .

[14]  Mary Frecker,et al.  Aircraft Structural Morphing Using Tendon-Actuated Compliant Cellular Trusses , 2005 .

[15]  James H. Mabe,et al.  NiTinol performance characterization and rotary actuator design , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Dmitri Golberg,et al.  Characteristics of Ti50Pd30Ni20 high-temperature shape memory alloy , 1995 .

[17]  O. Guellati,et al.  SHS of shape memory CuZnAl alloys , 2008 .

[18]  D. Lagoudas,et al.  Numerical implementation of a shape memory alloy thermomechanical constitutive model using return mapping algorithms , 2000 .

[19]  Stefan Seelecke,et al.  Shape memory alloy actuators in smart structures: Modeling and simulation , 2004 .

[20]  Ferdinando Auricchio,et al.  Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behavior , 1997 .

[21]  D. M. Elzey,et al.  Shape morphing hinged truss structures , 2009 .

[22]  Inderjit Chopra,et al.  An Improved Shape Memory Alloy Actuator for Rotor Blade Tracking , 2003 .

[23]  Massimo Ruzzene,et al.  Smart shape memory alloy chiral honeycomb , 2008 .

[24]  Adrian Robert Bowles,et al.  High temperature shape memory alloy actuators through mechanical treatments for an oil & gas down-hole valve , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[25]  K. Eckelmeyer.  The effect of alloying on the shape memory phenomenon in nitinol , 1976 .

[26]  Antonio Concilio,et al.  Wing Shape Control through an SMA-Based Device , 2009 .

[27]  Craig A. Rogers,et al.  One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials , 1990 .

[28]  Anna-Maria Rivas McGowan,et al.  Overview of the DARPA/AFRL/NASA Smart Wing program , 1999, Smart Structures.

[29]  L. Brinson.  One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable , 1993 .

[30]  Dale M. Pitt,et al.  SAMPSON smart inlet design overview and wind tunnel test: I. Design overview , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[31]  C. M. Wayman,et al.  The two-way shape memory effect and other “training” phenomena in CuZn single crystals , 1977 .

[32]  Inderjit Chopra,et al.  In-flight tracking of helicopter rotor blades using shape memory alloy actuators , 1999 .

[33]  Liang Jun,et al.  A changeable aerofoil actuated by shape memory alloy springs , 2008 .

[34]  H. Prahlad,et al.  Modeling and Experimental Characterization of SMA Torsional Actuators , 2007 .

[35]  Fujun Peng,et al.  Actuation precision control of SMA actuators used for shape control of inflatable SAR antenna , 2008 .

[36]  Neil Morgan,et al.  Medical shape memory alloy applications—the market and its products , 2004 .

[37]  Christopher A. Martin,et al.  Overview of recent progress on the DARPA/USAF Wright Laboratory Smart Materials and Structures Development--Smart Wing program , 1997, Smart Structures.

[38]  Vladimir Brailovski,et al.  Design of Shape Memory Alloy Actuators for Morphing Laminar Wing With Flexible Extrados , 2009 .

[39]  M. Mertmann,et al.  Design and application of shape memory actuators , 2008 .

[40]  D. Lagoudas,et al.  A UNIFIED THERMODYNAMIC CONSTITUTIVE MODEL FOR SMA AND FINITE ELEMENT ANALYSIS OF ACTIVE METAL MATRIX COMPOSITES , 1996 .

[41]  J. V. Gilfrich,et al.  Effect of Low‐Temperature Phase Changes on the Mechanical Properties of Alloys near Composition TiNi , 1963 .

[42]  Dimitris C. Lagoudas,et al.  Experimental and microstructural characterization of simultaneous creep, plasticity and phase transformation in Ti50Pd40Ni10 high-temperature shape memory alloy , 2010 .

[43]  Yinong Liu,et al.  Restoration by rapid overheating of thermally stabilised martensite of NiTi shape memory alloys , 2000 .

[44]  Yufeng Zheng,et al.  Shape memory properties of the Ti36Ni49Hf15 high temperature shape memory alloy , 2000 .

[45]  L. Brinson,et al.  A three-dimensional phenomenological model for martensite reorientation in shape memory alloys , 2007 .

[46]  Claudio Bombardelli,et al.  Space Power Generation with a Tether Heat-Engine , 2008 .

[47]  W. Cai,et al.  Shape-memory behaviors in an aged Ni-rich TiNiHf high temperature shape-memory alloy , 2008 .

[48]  Jonathan D. Bartley-Cho,et al.  Improved design and performance of the SMA torque tube for the DARPA Smart Wing program , 1999, Smart Structures.

[49]  Mark A. Hopkins,et al.  Overview of the SAMPSON smart inlet , 1999, Smart Structures.

[50]  Dimitris C. Lagoudas,et al.  Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys. Part I: constitutive model for fully dense SMAs , 2004 .

[51]  A. Bertram.  Thermo-mechanical constitutive equations for the description of shape memory effects in alloys , 1983 .

[52]  H. Wagner,et al.  The alloy with a memory, 55-Nitinol: Its physical metallurgy, properties, and applications , 1972 .

[53]  Parsaoran Hutapea,et al.  Development of a smart wing , 2008 .

[54]  Dimitris C. Lagoudas,et al.  Design of space systems using shape memory alloys , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[55]  Dimitris C. Lagoudas,et al.  Fatigue life characterization of shape memory alloys undergoing thermomechanical cyclic loading , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[56]  A. Pelton,et al.  An overview of nitinol medical applications , 1999 .

[57]  K. Tanaka.  A THERMOMECHANICAL SKETCH OF SHAPE MEMORY EFFECT: ONE-DIMENSIONAL TENSILE BEHAVIOR , 1986 .

[58]  Ahmed A. Hassan,et al.  Smart Material-Actuated Rotor Technology – SMART , 2004 .

[59]  G. Guénin,et al.  Training and two way memory effect in CuZnAl alloy , 1990 .

[60]  Gangbing Song,et al.  Design and control of a proof-of-concept variable area exhaust nozzle using shape-memory alloy actuators , 2007 .

[61]  D. Lagoudas,et al.  Three-dimensional modeling and numerical analysis of rate-dependent irrecoverable deformation in shape memory alloys , 2010 .

[62]  Jian Shen Wu,et al.  Characterization of mechanical properties of Ti50.6Ni19.4Pd30 alloy showing different phase transformation behaviors , 2003, SPIE Microtechnologies.

[63]  Dimitris C. Lagoudas,et al.  A 3-D constitutive model for shape memory alloys incorporating pseudoelasticity and detwinning of self-accommodated martensite , 2007 .

[64]  Jae-Hung Han,et al.  Configuration Control of Aerospace Structures with Smart Materials , 2005 .

[65]  In Lee,et al.  Shape Adaptive Airfoil Actuated by a Shape Memory Alloy and its Aerodynamic Characteristics , 2009 .

[66]  Anita Garg,et al.  Characterization of ternary NiTiPt high-temperature shape memory alloys , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.