Comparative life cycle assessment: Reinforcing wind turbine blades with carbon nanofibers

Wind energy conversion (WEC) is dependent on wind power density, which increases with elevation and swept area of the rotor. Many components are readily scalable and size-independent; whereas, turbine blades have presented a new frontier in aerodynamic design. As the limits of glass fiber-reinforced plastics (GFRP) have been reached in this field, there is now a materials development problem in achieving outlooks for larger, more resilient WEC systems. A hybrid material is under development, which uses vapor-grown carbon nanofibers (VGCNF or CNF) to reinforce the interface of a glass fiber/epoxy matrix. This research aims to determine life cycle effects of substituting GFRP in large turbine blades with the hybrid material. A review of literature, databases, and industry reports on life cycle data for wind turbines helped to establish a baseline descriptive life cycle assessment (LCA). Trends of new installations were assessed to determine appropriate boundaries for comparison. Results indicate that cradle-to-gate processing energy of the new material is 1.4–7.7 times greater than for the original GFRP material on a MJ/kg basis under implicit assumptions of weight savings. Effects on energetic return on investment (EROI) vary from insignificant to substantial according to upstream process choices for CNF manufacture and solvent handling. All conclusions inherently assume that CNF-incorporation would lead to realizable technologies for substantially increasing either size or life span of turbine blades concomitant with weight savings. It is not yet substantiated whether replacement of long carbon fibers is advantageous both mechanically and energetically.

[1]  W. Leithead,et al.  Wind energy , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[2]  Joel Waldfogel,et al.  Introduction , 2010, Inf. Econ. Policy.

[3]  M. Huijbregts,et al.  Cumulative energy demand as predictor for the environmental burden of commodity production. , 2010, Environmental science & technology.

[4]  Sung-Moo Song,et al.  Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers , 2005 .

[5]  Edgar G. Hertwich,et al.  Life cycle assessment of a floating offshore wind turbine , 2009 .

[6]  B. Hayman,et al.  Materials Challenges in Present and Future Wind Energy , 2008 .

[7]  George Marsh,et al.  Wind turbines: How big can they get? , 2005 .

[8]  C. P. Debel,et al.  Improved design of large wind turbine blade of fibre composites based on studies of scale effects (Phase 1) - Summary Report , 2004 .

[9]  John A. Michon,et al.  Design considerations , 1993, Generic Intelligent Driver Support.

[10]  L. J. Lee,et al.  Effect of Carbon Nanofibers on Mold Filling in a Vacuum Assisted Resin Transfer Molding System , 2009 .

[11]  M. J. Hutzler,et al.  Emissions of greenhouse gases in the United States , 1995 .

[12]  S. Jeelani,et al.  Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers , 2008 .

[13]  J. Schnoor.  Three myths about water. , 2010, Environmental science & technology.

[14]  Vikas Khanna,et al.  Carbon Nanofiber Production , 2008 .

[15]  Thomas D. Ashwill,et al.  Alternative Composite Materials for Megawatt-Scale Wind Turbine Blades: Design Considerations and Recommended Testing , 2003 .

[16]  Chris Hendrickson,et al.  Direct and indirect water withdrawals for U.S. industrial sectors. , 2010, Environmental science & technology.

[17]  Francis Meunier,et al.  Life cycle analysis of 4.5 MW and 250 W wind turbines , 2009 .

[18]  Marino Quaresimin,et al.  Glass-fibre-reinforced composites with enhanced mechanical and electrical properties – Benefits and limitations of a nanoparticle modified matrix , 2006 .

[19]  Nancy L. Barber,et al.  Estimated Use of Water in the United States in 2000 , 2004 .

[20]  Vikas Khanna,et al.  Carbon nanofiber polymer composites: evaluation of life cycle energy use. , 2009, Environmental science & technology.