Monodisperse and fast-responsive poly(N-isopropylacrylamide) microgels with open-celled porous structure.

A simple and efficient method is developed to fabricate monodisperse and fast-responsive poly(N-isopropylacrylamide) (PNIPAM) microgels with open-celled porous structure. First, numerous fine oil droplets are fabricated by homogeneous emulsification method and are then evenly dispersed inside monodisperse PNIPAM microgels as porogens via the combination of microfluidic emulsification and UV-initiated polymerization methods. Subsequently, the embedded fine oil droplets inside the PNIPAM microgels are squeezed out upon stimuli-induced rapid volume shrinkage of the microgels; as a result, a spongelike open-celled porous structure is formed inside the PNIPAM microgels. The open-celled porous structure provides numerous interconnected free channels for the water transferring convectively inward or outward during the volume phase transition process of PNIPAM microgels; therefore, the response rates of the PNIPAM microgels with open-celled porous structure are much faster than that of the normal ones in both thermo-responsive shrinking and swelling processes. Because of the fast-responsive characteristics, the microgels with open-celled porous structure will provide ever better performances in their myriad applications, such as microsensors, microactuators, microvalves, and so on.

[1]  Jingtao Wang,et al.  Fabrication of advanced particles and particle-based materials assisted by droplet-based microfluidics. , 2011, Small.

[2]  Liang-Yin Chu,et al.  Smart responsive microcapsules capable of recognizing heavy metal ions. , 2010, Journal of colloid and interface science.

[3]  L. Chu,et al.  Conversion of alcoholic concentration variations into mechanical force via core-shell capsules. , 2012, The journal of physical chemistry. B.

[4]  M. Heskins,et al.  Solution Properties of Poly(N-isopropylacrylamide) , 1968 .

[5]  Shinji Sugiura,et al.  Photoresponsive polymer gel microvalves controlled by local light irradiation , 2007 .

[6]  Hideaki Tokuyama,et al.  Novel synthesis of macroporous poly(N-isopropylacrylamide) hydrogels using oil-in-water emulsions. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[7]  M. Akashi,et al.  Rapid Deswelling of Porous Poly(N-isopropylacrylamide) Hydrogels Prepared by Incorporation of Silica Particles , 2002 .

[8]  L. Chu,et al.  Responsive hydrogels with poly(N-isopropylacrylamide-co-acrylic acid) colloidal spheres as building blocks. , 2010, Journal of colloid and interface science.

[9]  R. K. Shah,et al.  Monodisperse Thermoresponsive Microgels with Tunable Volume‐Phase Transition Kinetics , 2007 .

[10]  Toyoichi Tanaka,et al.  Kinetics of discontinuous volume-phase transition of gels , 1988 .

[11]  Wei Wang,et al.  Functional polymeric microparticles engineered from controllable microfluidic emulsions. , 2014, Accounts of chemical research.

[12]  T. Okano,et al.  Temperature-responsive shrinking kinetics of poly (N-isopropylacrylamide) copolymer gels with hydrophilic and hydrophobic comonomers , 1995 .

[13]  Liang-Yin Chu,et al.  Controllable monodisperse multiple emulsions. , 2007, Angewandte Chemie.

[14]  R. K. Shah,et al.  Fabrication of Monodisperse Thermosensitive Microgels and Gel Capsules in Microfluidic Devices Highlight Www.rsc.org/softmatter | Soft Matter , 2022 .

[15]  Shan‐Yang Lin,et al.  Drying methods affecting the particle sizes, phase transition, deswelling/reswelling processes and morphology of poly(N-isopropylacrylamide) microgel beads , 1999 .

[16]  David A. Weitz,et al.  Microgel suspensions : fundamentals and applications , 2011 .

[17]  Kiyotaka Sakai,et al.  Rapid Deswelling Response of Poly(N-isopropylacrylamide) Hydrogels by the Formation of Water Release Channels Using Poly(ethylene oxide) Graft Chains , 1998 .

[18]  Jie Zhang,et al.  Effect of freeze-drying and rehydrating treatment on the thermo-responsive characteristics of poly(N-isopropylacrylamide) microspheres , 2008 .

[19]  Jie Zhang,et al.  Preparation of monodisperse thermo-sensitive poly(N-isopropylacrylamide) hollow microcapsules. , 2007, Journal of colloid and interface science.

[20]  Shuiqin Zhou,et al.  A simple method to fabricate fluorescent glucose sensor based on dye-complexed microgels , 2013 .

[21]  Wei Wang,et al.  Nano-structured smart hydrogels with rapid response and high elasticity , 2013, Nature Communications.

[22]  Change in size and structure of monodisperse poly(N-isopropylacrylamide) microcapsules in response to varying temperature and ethyl gallate concentration , 2012 .

[23]  G. Luo,et al.  The dynamic effects of surfactants on droplet formation in coaxial microfluidic devices. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[24]  Jie Zhang,et al.  Graft-type poly(N-isopropylacrylamide-co-acrylic acid) microgels exhibiting rapid thermo- and pH-responsive properties , 2008 .

[25]  S. Hirotsu,et al.  Kinetics of volume phase transition in poly(N-isopropylacrylamide) gels , 2002 .

[26]  S. Armes,et al.  Direct imaging and spectroscopic characterization of stimulus-responsive microgels. , 2005, Journal of the American Chemical Society.

[27]  D. Weitz,et al.  Monodisperse Double Emulsions Generated from a Microcapillary Device , 2005, Science.

[28]  Liang-Yin Chu,et al.  Smart thermo-triggered squirting capsules for nanoparticle delivery , 2010 .

[29]  Curtis W. Frank,et al.  A microfluidic actuator based on thermoresponsive hydrogels , 2003 .

[30]  Wouter Olthuis,et al.  An efficient method for the fabrication of temperature-sensitive hydrogel microactuators. , 2004, Lab on a chip.

[31]  B. Saunders,et al.  Microgels: From responsive polymer colloids to biomaterials. , 2009, Advances in colloid and interface science.

[32]  Jie Wei,et al.  Nano-gel containing thermo-responsive microspheres with fast response rate owing to hierarchical phase-transition mechanism. , 2012, Journal of colloid and interface science.

[33]  Toyoichi Tanaka,et al.  Kinetics of swelling of gels , 1979 .

[34]  Zhibing Hu,et al.  Fabrication of monodisperse gel shells and functional microgels in microfluidic devices. , 2007, Angewandte Chemie.

[35]  J. Dzubiella,et al.  Core–shell microgels as “smart” carriers for enzymes , 2012 .

[36]  T. Okano,et al.  Comb-type grafted hydrogels with rapid deswelling response to temperature changes , 1995, Nature.

[37]  Hang Song,et al.  Effects of internal microstructures of poly(N-isopropylacrylamide) hydrogels on thermo-responsive volume phase-transition and controlled-release characteristics , 2006 .

[38]  Hyun Jik Oh,et al.  A polymeric microfluidic valve employing a pH-responsive hydrogel microsphere as an actuating source , 2006 .

[39]  Liang Dong,et al.  Autonomous microfluidics with stimuli-responsive hydrogels. , 2007, Soft matter.

[40]  T. Okano,et al.  Influence of Freely Mobile Grafted Chain Length on Dynamic Properties of Comb-Type Grafted Poly(N-isopropylacrylamide) Hydrogels , 1995 .

[41]  M. Ballauff,et al.  Enhanced activity of enzymes immobilized in thermoresponsive core-shell microgels. , 2009, The journal of physical chemistry. B.

[42]  B. Lin,et al.  Microfluidic synthesis of tunable poly‐(N‐isopropylacrylamide) microparticles via PEG adjustment , 2011, Electrophoresis.

[43]  L. Chu,et al.  Smart Hydrogel Functional Materials , 2013 .

[44]  Yi Yan Yang,et al.  Preparation and characterization of fast response macroporous poly(N-isopropylacrylamide) hydrogels , 2001 .

[45]  Xianzheng Zhang,et al.  Effect of Mixed Solvents on Characteristics of Poly(N-isopropylacrylamide) Gels , 2002 .