A Shape Memory Alloy-Based Morphing Axial Fan Blade—Part I: Blade Structure Design and Functional Characterization

The possibility to realize adaptive structures is of great interest in turbomachinery design, owing to the benefits related to enhanced performance and efficiency. To accomplish this, a challenging approach is the employment of Shape Memory Alloys (SMAs), which can recover seemingly permanent strains by solid phase transformations whereby the so-called Shape Memory Effect (SME) takes place.This paper presents the development of a heavy-duty automotive cooling axial fan with morphing blades activated by SMA strips that works as actuator elements in the polymeric blade structure. Concerning the fan performance, this new concept differs from a conventional viscous fan clutch solution especially during the non-stationary operating condition. The blade design was performed in order to achieve the thermal activation of the strips by means of air stream flow. Two polymeric matrices were chosen to be tested in conjunction with a commercially available NiTi binary alloy, whose phase transformation temperatures were experimentally evaluated by imposing the actual operating thermal gradient.The SMA strips were then thermo-mechanically treated to memorize a bent shape and embedded in the polymeric blade. In a specifically designed wind tunnel, the different polymeric matrices equipped with the SMA strips were tested to assess the fluid temperature and surface pattern behavior of the blade. Upon heating they tend to recover the memorized shape and the blade is forced to bend, leading to a camber variation and a trailing edge displacement. The recovery behavior of each composite structure (polymeric matrix with SMA strips) was evaluated through digital image analysis techniques. The differences between the blade shape at the initial condition and at the maximum bending deformation were considered.According to these results, the best coupling of SMA strips and polymeric structure is assessed and its time-wise behavior is compared to the traditional time-wise behavior of a viscous fan clutch.Copyright © 2015 by ASME

[1]  Paul M. Weaver,et al.  Review of morphing concepts and materials for wind turbine blade applications , 2013 .

[2]  Dieter Stoeckel,et al.  Shape memory actuators for automotive applications , 1990 .

[3]  W. Huang,et al.  Stimulus-responsive shape memory materials: A review , 2012 .

[4]  Terrence A. Weisshaar,et al.  Morphing Aircraft Systems: Historical Perspectives and Future Challenges , 2013 .

[5]  Martin Leary,et al.  A review of shape memory alloy research, applications and opportunities , 2014 .

[6]  Gangbing Song,et al.  Robust control of a shape memory alloy wire actuated flap , 2007 .

[7]  John Yen,et al.  Design and Implementation of a Shape Memory Alloy Actuated Reconfigurable Airfoil , 2003 .

[8]  Everett G. Blair.  Comparison of Modulated (Viscous) versus On-Off Fan Clutches , 1974 .

[9]  Kyu Hyun Lee,et al.  Development of A Continuously Variable Speed Viscous Fan Clutch for Engine Cooling System , 1998 .

[10]  Kwonhue Choi,et al.  Active coolant control strategies in automotive engines , 2010 .

[11]  Arthur Elmer,et al.  Direct Sensing - Modulating Fan Clutch for Heavy Duty Commercial Vehicles , 1994 .

[12]  S Jayasankar,et al.  Development and wind tunnel evaluation of a shape memory alloy based trim tab actuator for a civil aircraft , 2013 .

[13]  Michele Pinelli,et al.  A Shape Memory Alloy-Based Morphing Axial Fan Blade: Part II — Blade Shape and CFD Analyses , 2015 .

[14]  D. Lagoudas.  Shape memory alloys : modeling and engineering applications , 2008 .

[15]  Gn Dayananda,et al.  Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements , 2011 .

[16]  Shaker A. Meguid,et al.  Shape morphing of aircraft wing: Status and challenges , 2010 .

[17]  Bengt Sundén,et al.  Vehicle Cooling Systems for Reducing Fuel Consumption and Carbon Dioxide: Literature Survey , 2010 .

[18]  Dimitris C. Lagoudas,et al.  Design optimization and uncertainty analysis of SMA morphing structures , 2012 .

[19]  Inderjit Chopra,et al.  In-flight tracking of helicopter rotor blades using shape memory alloy actuators , 1999 .

[20]  Zhao Changlu,et al.  A Simulation Study of an Advanced Thermal Management System for Heavy Duty Diesel Engines , 2012 .

[21]  Lucas I. Lago,et al.  The adaptive-blade concept in wind-power applications , 2014 .

[22]  Andres F. Arrieta,et al.  Variable stiffness material and structural concepts for morphing applications , 2013 .

[23]  M. Merlin,et al.  Shape recovery behaviour of NiTi strips in bending: experiments and modelling , 2013 .

[24]  Daniel J. Inman,et al.  A Review of Morphing Aircraft , 2011 .

[25]  Dimitris C. Lagoudas,et al.  Aerospace applications of shape memory alloys , 2007 .