Dynamic mechanical behavior of a Zr-based bulk metallic glass during glass transition and crystallization

[1]  P. Ochin,et al.  First investigations on twin-rolled Zr59Cu20Al10Ni8Ti3 bulk amorphous alloy by mechanical spectroscopy , 2004 .

[2]  Ping Wen,et al.  Relaxation of metallic Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk glass-forming supercooled liquid , 2004 .

[3]  O. P. Bobrov,et al.  Comparative internal friction study of bulk and ribbon glassy Zr52.5Ti5Cu17.9Ni14.6Al10 , 2003 .

[4]  S. Takeuchi,et al.  Low-frequency high-temperature internal friction of bulk metallic glasses , 2003 .

[5]  W. Carter,et al.  Frequency-dependent complex modulus at the glass transition inPd40Ni10Cu30P20bulk amorphous alloys , 2003 .

[6]  K. Schröter,et al.  Comparison of shear response with other properties at the dynamic glass transition of different glassformers , 2002 .

[7]  F. Zu,et al.  Internal friction behaviours in Zr57Al10Ni12.4Cu15.6Nb5 bulk metallic glass , 2002 .

[8]  R. Dauskardt,et al.  The effects of hydrogen on viscoelastic relaxation in Zr–Ti–Ni–Cu–Be bulk metallic glasses: implications for hydrogen embrittlement , 2002 .

[9]  H. Sinning,et al.  A mechanical spectroscopy study of the Zr69.5Cu12Ni11Al7.5 alloy , 2000 .

[10]  J. Soubeyroux,et al.  Physical properties of bulk amorphous glasses: influence of physical aging and onset of crystallisation , 2000 .

[11]  G. Vigier,et al.  Relaxation of non-crystalline solids under mechanical stress , 2000 .

[12]  A. Tsai,et al.  Comparing the dynamic tensile response of supercooled Pd48Ni32P20 and Pt60Ni15P25 , 1999 .

[13]  J. Cavaillé,et al.  New experimental features and revisiting the α and β mechanical relaxation in glasses and glass-forming liquids , 1999 .

[14]  J. Pérez.  Study of polymer materials by mechanical spectroscopy methods , 1998 .

[15]  K. Samwer,et al.  Structural relaxation and viscous flow in amorphous ZrAlCu , 1995 .

[16]  W. Johnson,et al.  A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 , 1993 .

[17]  A. Inoue,et al.  Amorphous Zr–Al–TM (TM=Co, Ni, Cu) Alloys with Significant Supercooled Liquid Region of Over 100 K , 1991 .

[18]  A. Inoue,et al.  Mg–Cu–Y Amorphous Alloys with High Mechanical Strengths Produced by a Metallic Mold Casting Method , 1991 .

[19]  A. Inoue,et al.  Production of Amorphous Cylinder and Sheet of La55Al25Ni20 Alloy by a Metallic Mold Casting Method , 1990 .

[20]  H. Sinning.  Low-frequency internal friction of metallic glasses near Tg A critique of the use of the torsion pendulum , 1989 .