Size effect on compression strength of fiber composites failing by kink band propagation

The effect of structure size on the nominal strength of unidirectional fiber-polymer composites, failing by propagation of a kink band with fiber microbuckling, is analyzed experimentally and theoretically. Tests of novel geometrically similar carbon–PEEK specimens, with notches slanted so as to lead to a pure kink band (not accompanied by shear or splitting cracks), are conducted. They confirm the possibility of stable growth of long kind bands before the peak load, and reveal the existence of a strong (deterministic, non-statistical) size effect. The bi-logarithmic plot of the nominal strength (load divided by size and thickness) versus the characteristic size agrees with the approximate size effect law proposed for quasibrittle failures in 1983 by Bažant. The plot exhibits a gradual transition from a horizontal asymptote, representing the case of no size effect (characteristic of plasticity or strength criteria), to an asymptote of slope -1/2 (characteristic of linear elastic fracture mechanics, LEFM). A new derivation of this law by approximate (asymptotically correct) J-integral analysis of the energy release, as well as by the recently proposed nonlocal fracture mechanics, is given. The size effect law is further generalized to notch-free specimens attaining the maximum load after a stable growth of a kink band transmitting a uniform residual stress, and the generalized law is verified by Soutis, Curtis and Fleck's recent compression tests of specimens with holes of different diameters. The nominal strength of specimens failing at the initiation of a kink band from a smooth surface is predicted to also exhibit a (deterministic) size effect if there is a nonzero stress gradient at the surface. A different size effect law is derived for this case by analyzing the stress redistribution. The size effect law for notched specimens permits the fracture energy of the kink band and the length of the fracture process zone at the front of the band to be identified solely from the measurements of maximum loads. The results indicate that the current design practice, which relies on the strength criteria or plasticity and thus inevitably misses the size effect, is acceptable only for small structural parts and, in the interest of safety, should be revised in the case of large structural parts.

[1]  J. Rice,et al.  The growth of slip surfaces in the progressive failure of over-consolidated clay , 1973, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[2]  R. Christensen,et al.  The Kink Band Mechanism for the Compressive Failure of Fiber Composite Materials , 1997 .

[3]  N. Fleck,et al.  Microbuckle propagation in carbon fibre-epoxy composites , 1994 .

[4]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[5]  Bernard Budiansky,et al.  Mechanics of materials and material characterizationMicromechanics , 1983 .

[6]  Z. Bažant,et al.  Determination of fracture energy, process zone longth and brittleness number from size effect, with application to rock and conerete , 1990 .

[7]  N. Fleck,et al.  Compressive R-curve of a carbon fibre-epoxy matrix composite , 1996 .

[8]  Isaac M Daniel,et al.  Failure mechanisms in thick composites under compressive loading , 1996 .

[9]  A. S. Argon,et al.  Fracture of Composites , 1972 .

[10]  C. Shih,et al.  Kink band formation and band broadening in fiber composites under compressive loading , 1995 .

[11]  N. Fleck,et al.  Prediction of compressive toughness for fibre composites , 1996, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Norman A. Fleck,et al.  Compressive failure of fibre composites , 1993 .

[13]  Z. Bažant,et al.  Stability of Cohesive Crack Model: Part II—Eigenvalue Analysis of Size Effect on Strength and Ductility of Structures , 1995 .

[14]  Norman A. Fleck,et al.  Compressive Failure of Fiber Composites , 1997 .

[15]  Z. Bažant,et al.  Scaling of quasibrittle fracture: asymptotic analysis , 1997 .

[16]  N. Fleck,et al.  Microbuckle initiation in fibre composites : A finite element study , 1995 .

[17]  Zdenek P. Bazant,et al.  Modulus of Rupture: Size Effect due to Fracture Initiation in Boundary Layer , 1995 .

[18]  M. De.  Handbuch der Physik , 1957 .

[19]  Z. Bažant.  Size Effect in Blunt Fracture: Concrete, Rock, Metal , 1984 .

[20]  William Prager,et al.  Mechanics of geomaterials : rocks, concretes, soils : proceedings of IUTAM William Prager Symposium held at Northwestern University, Evanston, Illinois, USA, during September 11-15, 1983 , 1985 .

[21]  Zdenek P. Bazant,et al.  Instability, Ductility, and Size Effect in Strain-Softening Concrete , 1978 .

[22]  S. Kyriakides,et al.  Aspects of the Failure and Postfailure of Fiber Composites in Compression , 1997 .

[23]  Stelios Kyriakides,et al.  On the compressive failure of fiber reinforced composites , 1995 .

[24]  Norman A. Fleck,et al.  Static Compression Failure of Carbon Fibre T800/924C Composite Plate with a Single Hole , 1990 .

[25]  Zdenek P. Bazant,et al.  Scaling of Structural Failure , 1997 .

[26]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[27]  James C. Newman,et al.  A nonlinear fracture mechanics approach to the growth of small cracks , 1983 .

[28]  N. Fleck,et al.  On kink-band propagation in fiber composites , 1998 .

[29]  Norman A. Fleck,et al.  Deformation and failure of a carbon fibre composite under combined shear and transverse loading , 1995 .

[30]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[31]  B. W. Rosen,et al.  Mechanics of composite strengthening. , 1965 .

[32]  Zdenek P. Bazant,et al.  FRACTURE IN CONCRETE AND REINFORCED CONCRETE. , 1983 .

[33]  Norman A. Fleck,et al.  Failure Prediction Technique for Compression Loaded Carbon Fibre-Epoxy Laminate with Open Holes , 1991 .

[34]  Norman A. Fleck,et al.  Compressive failure of notched carbon fibre composites , 1993, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[35]  Norman A. Fleck,et al.  Compression Failure Mechanisms in Unidirectional Composites , 1992 .

[36]  Anthony M. Waas,et al.  Compressive failure of composites, part I: Testing and micromechanical theories , 1996 .

[37]  Anthony M. Waas,et al.  Compressive failure of composites, part II: Experimental studies , 1996 .

[38]  Zhigang Suo,et al.  The role of material orthotropy in fracture specimens for composites , 1992 .

[39]  Zdenek P. Bazant,et al.  Size Effect and Fracture Characteristics of Composite Laminates , 1996 .

[40]  Zdeněk P. Bažant,et al.  Mechanics of Geomaterials: Rocks, Concretes, Soils , 1983 .