A sensorless speed acquisition method for induction machines

The speed of the rotor and the speed of the rotating magnetic field are different for induction machines. The difference is described by the slip which is normally unknown because it depends on the load. For motion control the speed must be known. This information is mostly taken by a separate rpm sensor. It is desirable to eliminate this sensor because the availability of the machine will be higher, working processes under demanding ambient conditions are easier feasible and the investment for the sensor will be saved, too. This paper explains the basic principle of a sensorless speed measurement which uses anisotropies to detect the rotor speed. Additionally a mathematical model describing the behaviour of the modified machine is presented.

[1]  Robert D. Lorenz,et al.  Measuring, modeling and decoupling of saturation-induced saliencies in carrier signal injection-based sensorless AC drives , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[2]  Joachim Holtz,et al.  Sensorless control of induction motor drives , 2002, Proc. IEEE.

[3]  Matthias Hofer,et al.  Sensorless Control of PM Synchronous Motors in the Whole Speed Range Including Standstill Using a Combined INFORM/EMF Model , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[4]  Robert D. Lorenz,et al.  Comparison of saliency-based sensorless control techniques for AC machines , 2003 .