Ageing workforce management in manufacturing systems: state of the art and future research agenda

The workforce ageing phenomenon is recently affecting most of the Organisation for Economic Co-operation and Development (OECD) member countries, due to a general ageing of their populations and a higher average retirement age of the workforce. In this paper, the topic of ageing workforce management is addressed from a production research standpoint, with the aim of understanding how older workers can be supported and involved in a manufacturing system. First, the current state of the art related to the ageing workforce in production systems is presented. This is structured according to four main topics: (1) analysis and evaluation of ageing workers’ functional capacities, (2) consideration of ageing workers’ capacities in industrial system modelling and management, (3) analysis and exploitation of ageing workers’ expertise, (4) acknowledgement, analysis, design and integration of supporting technologies. Next, the discussion on the impact of the ageing workforce on manufacturing systems’ performances leads to the comparison of some technological advances that are related to the Industry 4.0 paradigms. Finally, a future research agenda on this topic is proposed, based on the same topics classification proposed for the literature analysis. Five different research areas are derived, suggesting future directions for appropriate research concerning the employ of older workers in production environments.

[1]  R. M. Belbin,et al.  Pacing stress, human adaptation and training in car production , 1972 .

[2]  S Aunola,et al.  Strain of employees in the machine industry in Finland. , 1978, Ergonomics.

[3]  William N. Cooke,et al.  The determinants of occupational injury severity: the case of Maine sawmills , 1979 .

[4]  S Aunola,et al.  Strain of employees in the manufacturing industry in Finland. , 1979, Ergonomics.

[5]  The analysis of change in occupational qualities by ageing , 1980 .

[6]  ScienceDirect.  Robotics and computer-integrated manufacturing , 1984 .

[7]  Dev S. Kochhar,et al.  An analysis of age and informational load in Type II tasks , 1985 .

[8]  S H Snook,et al.  Approaches to preplacement testing and selection of workers. , 1987, Ergonomics.

[9]  Hisao Nagata,et al.  Analysis of fatal falls on the same level or on stairs/steps , 1991 .

[10]  Ewa Menckel,et al.  Aging and occupational accidents a review of the literature of the last three decades , 1995 .

[11]  Lucie Laflamme,et al.  Age-related accident ratios in assembly work: A study of female assembly workers in the Swedish automobile industry , 1996 .

[12]  Lucie Laflamme,et al.  Age-related accident risks among assembly workers: A longitudinal study of male workers employed in the Swedish automobile industry , 1996 .

[13]  P. Taylor,et al.  Combating Age Barriers in Employment A European Portfolio of Good Practice , 1998 .

[14]  R. Darin Ellis,et al.  Performance implications of older workers in technological manufacturing environments: a task-analysis/human reliability perspective , 1999, Int. J. Comput. Integr. Manuf..

[15]  Byung Yong Jeong.  Comparisons of variables between fatal and nonfatal accidents in manufacturing industry , 1999 .

[16]  Mitsuyuki Kawakami,et al.  Evaluating elements of the work area in terms of job redesign for older workers , 2000 .

[17]  M Kumashiro.  Ergonomics strategies and actions for achieving productive use of an ageing work-force , 2000, Ergonomics.

[18]  Min K. Chung,et al.  Evaluation of lifting tasks frequently performed during fire brick manufacturing processes using NIOSH lifting equations , 2000 .

[19]  K. Sołtyński,et al.  Physiological strain of wearing aluminized protective clothing at rest in young, middle-aged, and older men , 2000 .

[20]  Roy J. Shephard,et al.  Aging and productivity: some physiological issues , 2000 .

[21]  C Gaudart,et al.  Conditions for maintaining ageing operators at work--a case study conducted at an automobile manufacturing plant. , 2000, Applied ergonomics.

[22]  Heikki Laitinen,et al.  The effect of age on subjective assessment of hygienic work environment in the metal industry , 2000 .

[23]  A. Marszałek.  Thirst and Work Capacity of Older People in a Hot Environment , 2000, International journal of occupational safety and ergonomics : JOSE.

[24]  David A. Nembhard,et al.  The Effects of Worker Learning, Forgetting, and Heterogeneity on Assembly Line Productivity , 2001, Manag. Sci..

[25]  Phyllis M King,et al.  A comparison of the effects of floor mats and shoe in-soles on standing fatigue. , 2002, Applied ergonomics.

[26]  A. Walker,et al.  A Strategy for Active Ageing , 2002 .

[27]  Raja Parasuraman,et al.  Neuroergonomics: Research and practice , 2003 .

[28]  Arunkumar Pennathur,et al.  Daily living activities in older adults: Part I—a review of physical activity and dietary intake assessment methods , 2003 .

[29]  Arunkumar Pennathur,et al.  Manual dexterity of older Mexican American adults: a cross- sectional pilot experimental investigation , 2003 .

[30]  Libby Brooke,et al.  Human resource costs and benefits of maintaining a mature‐age workforce , 2003 .

[31]  Jean-Claude Marquié,et al.  Shiftwork experience, age and cognitive performance , 2005, Ergonomics.

[32]  Myron A. Olstein.  Managing the coming brain drain , 2005 .

[33]  K. Amasaka.  Applying New JIT-Toyota's global production strategy: Epoch-making innovation of the work environment , 2005 .

[34]  Mitsuyuki Kawakami,et al.  IT-based Job Enlargement System for Aging Workers( -Information and Operations Management) , 2006 .

[35]  Andreas Größler,et al.  The impact of the demographic transition on manufacturing: Effects of an ageing workforce in German industrial firms , 2007 .

[36]  S. Wiker,et al.  Effect of distractors, age, and level of education upon psychomotor task learning , 2007 .

[37]  Ji-Hea Woo,et al.  Distribution and determinants of maximal physical work capacity of Korean male metal workers , 2007, Ergonomics.

[38]  Ashraf A. Shikdar,et al.  Smart workstation design: an ergonomics and methods engineering approach , 2007 .

[39]  Alain Muzet,et al.  Combined Effects of Noise and Shift Work on Fatigue as a Function of Age , 2008, International journal of occupational safety and ergonomics : JOSE.

[40]  Juhani Smolander,et al.  Associations between work ability, health-related quality of life, physical activity and fitness among middle-aged men. , 2008, Applied ergonomics.

[41]  Gregory Neely,et al.  Accidents in family forestry's firewood production. , 2008, Accident; analysis and prevention.

[42]  Karlheinz Schaub,et al.  Musculoskeletal disorders in assembly jobs in the automotive industry with special reference to age management aspects , 2008 .

[43]  Andrew Y. C. Nee,et al.  Augmented reality for assembly guidance using a virtual interactive tool , 2008 .

[44]  Andrew Y. C. Nee,et al.  Augmented reality applications in manufacturing: a survey , 2008 .

[45]  Wen-Ruey Chang,et al.  A matched case–control study of circumstances of occupational same-level falls and risk of wrist, ankle and hip fracture in women over 45 years of age , 2008, Ergonomics.

[46]  S. F. Wiker,et al.  Auditory and visual distractor decrement in older worker manual assembly task learning: Impact of spatial reasoning, field independence, and level of education , 2009 .

[47]  Feng Duan,et al.  Human-robot collaboration in cellular manufacturing: Design and development , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[48]  David A. Lombardi,et al.  Factors influencing worker use of personal protective eyewear. , 2009, Accident; analysis and prevention.

[49]  M. Kawakami,et al.  A Study on Energy-efficient Temperature Control , 2009 .

[50]  Meng-Jung Chung,et al.  The effect of age and gender on joint range of motion of worker population in Taiwan , 2009 .

[51]  Alexander Verl,et al.  Cooperation of human and machines in assembly lines , 2009 .

[52]  Zhiyong Wang.  Design and Management , 2010, 2010 International Conference on Management and Service Science.

[53]  Ekkehart Frieling,et al.  Job rotation - implications for old and impaired assembly line workers. , 2010 .

[54]  W. C. Howell.  of the Human Factors and Ergonomics Society , 2010 .

[55]  Robert W Proctor,et al.  Cumulative knowledge and progress in human factors. , 2010, Annual review of psychology.

[56]  J. Dul,et al.  Human factors: spanning the gap between OM and HRM , 2010 .

[57]  Antonio Iera,et al.  The Internet of Things: A survey , 2010, Comput. Networks.

[58]  M. de Looze,et al.  What is the evidence for less shift work tolerance in older workers? , 2011, Ergonomics.

[59]  Axel Börsch-Supan,et al.  Productivity and age: Evidence from work teams at the assembly line , 2016 .

[60]  S. Volkoff,et al.  The role of experience in night work: Lessons from two ergonomic studies. , 2011, Applied ergonomics.

[61]  Maurizio Faccio,et al.  New methodological framework to improve productivity and ergonomics in assembly system design , 2011 .

[62]  Ibrahim H. Garbie,et al.  Development of a Smart Workstation for an Assembly Task , 2011 .

[63]  Occupational stress factors and musculo-skeletal disease in patients at a rehabilitation center , 2011 .

[64]  Feng Duan,et al.  Application of the Assembly Skill Transfer System in an Actual Cellular Manufacturing System , 2012, IEEE Transactions on Automation Science and Engineering.

[65]  Waldemar Karwowski,et al.  THE DISCIPLINE OF HUMAN FACTORS AND ERGONOMICS , 2012, Handbook of Human Factors and Ergonomics.

[66]  Soh-Khim Ong,et al.  Virtual and Augmented Reality Applications in Manufacturing , 2004, MIM.

[67]  Pedro Arezes,et al.  Assessing the use of hearing protection in industrial settings: A comparison between methods , 2013 .

[68]  H. Bouma,et al.  Accommodating older people at work , 2013 .

[69]  Marco Alberti,et al.  A multi-criteria ergonomic and performance methodology for evaluating alternatives in “manuable” material handling , 2013 .

[70]  Shankar Chakraborty,et al.  Material Handling Equipment Selection Using Weighted Utility Additive Theory , 2013 .

[71]  Martin Schmauder,et al.  Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing , 2014, Ergonomics.

[72]  A. Börsch-Supan,et al.  Aging in Europe: Reforms, International Diversification and Behavioral Reactions , 2014 .

[73]  Clas-Håkan Nygård,et al.  A four-year follow-up study of physical working conditions and perceived mental and physical strain among food industry workers. , 2014, Applied ergonomics.

[74]  Volker Paelke,et al.  Augmented reality in the smart factory: Supporting workers in an industry 4.0. environment , 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

[75]  Masaharu Kumashiro.  An Approach of Ergonomics and Management in Occupational Health for a Society of Aging Workers , 2014 .

[76]  B. Buchholz,et al.  Shoulder muscle fatigue development in young and older female adults during a repetitive manual task , 2014, Ergonomics.

[77]  Mathias Schmitt,et al.  Human-machine-interaction in the industry 4.0 era , 2014, 2014 12th IEEE International Conference on Industrial Informatics (INDIN).

[78]  Lida Xu,et al.  Internet of Things for Enterprise Systems of Modern Manufacturing , 2014, IEEE Transactions on Industrial Informatics.

[79]  Daria Battini,et al.  Innovative real-time system to integrate ergonomic evaluations into warehouse design and management , 2014, Comput. Ind. Eng..

[80]  Xu Xu,et al.  The effect of age on the hand movement time during machine paced assembly tasks for female workers , 2014 .

[81]  Ibrahim H. Garbie.  An experimental investigation on ergonomically designed assembly workstation , 2014 .

[82]  Giorgio Mossa,et al.  Modelling Workforce Aging in Job Rotation Problems , 2015 .

[83]  Kazuhiko Terashima,et al.  Estimation of operational force based on ground reaction force and human behavior for power-assisted attitude control system on overhead crane , 2015, 2015 IEEE/SICE International Symposium on System Integration (SII).

[84]  Christoph H. Glock,et al.  Incorporating human factors in order picking planning models: framework and research opportunities , 2015 .

[85]  Anamai Thetkathuek,et al.  Cold Exposure and Health Effects Among Frozen Food Processing Workers in Eastern Thailand , 2014, Safety and health at work.

[86]  Sotiris Makris,et al.  Design Considerations for Safe Human-robot Collaborative Workplaces , 2015 .

[87]  Joe Barrios,et al.  Bridging the gap: Using technology to capture the old & encourage the new , 2015, 2015 IEEE IAS Electrical Safety Workshop.

[88]  Joe Barrios,et al.  Bridging the Gap: Using Technology to Capture the Old and Encourage the New , 2016, IEEE Industry Applications Magazine.

[89]  Y. Oh,et al.  A 4-bar mechanism based for knee assist robotic exoskeleton using singular configuration , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[90]  Byung Yong Jeong,et al.  Preferred 11 different job rotation types in automotive company and their effects on productivity, quality and musculoskeletal disorders: comparison between subjective and actual scores by workers’ age , 2016, Ergonomics.

[91]  Yasuhiro Kakinuma,et al.  Tool posture and polishing force control on unknown 3-dimensional curved surface , 2016 .

[92]  P. Debroux.  Elderly Workers in Japan The Need for a New Approach , 2016 .

[93]  André Crosnier,et al.  Collaborative manufacturing with physical human–robot interaction , 2016 .

[94]  Carolyn M. Sommerich,et al.  Digital Human Modeling of Obese & Aging Workers in Automotive Manufacturing , 2016 .

[95]  Luis Onieva,et al.  Estimation of the relative risks of musculoskeletal injuries in the Andalusian manufacturing sector , 2016 .

[96]  M. de Looze,et al.  Sleep and need for recovery in shift workers: do chronotype and age matter? , 2016, Ergonomics.

[97]  P Morer,et al.  Ergonomics for the inclusion of older workers in the knowledge workforce and a guidance tool for designers. , 2016, Applied ergonomics.

[98]  Martha J. Sanders.  Age-Related Changes and Environmental Modifications for Healthy Older Workers in Manufacturing , 2016 .

[99]  Analysis of compensation cost related to musculoskeletal disorders (MSDs) against younger and older Malaysian manufacturing workers , 2016 .

[100]  Frank Krause,et al.  Exoskeletons for industrial application and their potential effects on physical work load , 2016, Ergonomics.

[101]  Enrico Del Fabbro,et al.  Ergonomic Analysis in Manufacturing Process. A Real Time Approach , 2016 .

[102]  Toru Takahashi,et al.  Intelli-Wrench: Smart Navigation Tool for Mechanical Assembly and Maintenance , 2016, ACM Multimedia.

[103]  Efstratios Stylianidis,et al.  Elders-up! An adaptive system for enabling knowledge transfer from senior adults to small companies , 2016, 2016 22nd International Conference on Virtual System & Multimedia (VSMM).

[104]  Marco Saggiomo,et al.  Human-and Task-Centered Assistance Systems in Production Processes of the Textile Industry: Determination of Operator-Critical Weaving Machine Components for AR-Prototype Development , 2016, 2016 49th Hawaii International Conference on System Sciences (HICSS).

[105]  Shuntaro Yamato,et al.  Analysis of tool posture control method on curved surface using polishing machine with 5-axis serial-parallel mechanism , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[106]  Daria Battini,et al.  Preventing ergonomic risks with integrated planning on assembly line balancing and parts feeding , 2017, Int. J. Prod. Res..

[107]  Modeling and simulation for manufacturing system in society of declining birthrate and aging population 1st Report, Modeling for worker disease risk , 2017 .

[108]  Lora A. Cavuoto,et al.  Heart Rate Variability During a Simulated Assembly Task; Influence of Age and Gender , 2017 .

[109]  Lucia Botti,et al.  Design of job rotation schedules managing the exposure to age-related risk factors , 2017 .

[110]  Fernando Deschamps,et al.  Past, present and future of Industry 4.0 - a systematic literature review and research agenda proposal , 2017, Int. J. Prod. Res..

[111]  Gabor Mezei,et al.  Injuries among electric power industry workers, 1995-2013. , 2017, Journal of safety research.

[112]  Bernhard Graimann,et al.  Anticipatory models of human movements and dynamics: the roadmap of the AnDy project , 2017 .

[113]  Lucian-Ionel Cioca,et al.  Workforce active ageing case study in a Romanian manufacturing company , 2017 .

[114]  Johannes Cottyn,et al.  The evaluation of an elementary virtual training system for manual assembly , 2017, Int. J. Prod. Res..

[115]  S. A. Binoosh,et al.  ASSESSMENT AND PREDICTION OF INDUSTRIAL WORKERS’ FATIGUE IN AN OVERHEAD ASSEMBLY JOB , 2017 .

[116]  Maria Pia Cavatorta,et al.  Investigation into the applicability of a passive upper-limb exoskeleton in automotive industry , 2017 .

[117]  Pascal Wild,et al.  Motor adaptation capacity as a function of age in carrying out a repetitive assembly task at imposed work paces. , 2017, Applied ergonomics.

[118]  Elbow Musculoskeletal Model for Industrial Exoskeleton with Modulated Impedance Based on Operator's Arm Stiffness , 2017, Int. J. Autom. Technol..

[119]  A. Laing,et al.  Older females in the workforce – the effects of age on psychophysical estimates of maximum acceptable lifting loads , 2017, Ergonomics.

[120]  Qian Wang,et al.  Incorporating Learning and Aging Attributes of Workers into a DES Model , 2018, 2018 2nd International Conference on Robotics and Automation Sciences (ICRAS).

[121]  Manoj Kumar Tiwari,et al.  Design for manufacturing and assembly/disassembly: joint design of products and production systems , 2018, Int. J. Prod. Res..

[122]  D. Battini,et al.  Ergonomics and human factors in waste collection: analysis and suggestions for the door-to-door method , 2018 .

[123]  Calzavara Martina,et al.  Integrating mocap system and immersive reality for efficient human-centred workstation design , 2018 .

[124]  Li Da Xu,et al.  Industry 4.0: state of the art and future trends , 2018, Int. J. Prod. Res..

[125]  The “Art of Aging” from an ergonomics viewpoint – Wisdoms on age , 2018 .

[126]  Jörgen Winkel,et al.  Innovation and employee injury risk in automotive disassembly operations , 2018, Int. J. Prod. Res..

[127]  K. Stecke,et al.  The evolution of production systems from Industry 2.0 through Industry 4.0 , 2018, Int. J. Prod. Res..

[128]  Kevin Desbrosses,et al.  Physiological consequences of using an upper limb exoskeleton during manual handling tasks. , 2018, Applied ergonomics.

[129]  A. Kusiak.  Smart manufacturing , 2018, Int. J. Prod. Res..

[130]  Duc Truong Pham,et al.  Human-robot collaboration in disassembly for sustainable manufacturing , 2019, Int. J. Prod. Res..

[131]  Mickaël Gardoni,et al.  A review of methodologies for integrating human factors and ergonomics in engineering design , 2018, Int. J. Prod. Res..

[132]  Christoph H. Glock,et al.  Applications of learning curves in production and operations management: A systematic literature review , 2019, Comput. Ind. Eng..

[133]  J. Sarkis,et al.  A supply chain sustainability innovation framework and evaluation methodology , 2018, Int. J. Prod. Res..

[134]  Daria Battini,et al.  The ageing workforce challenge: Investments in collaborative robots or contribution to pension schemes, from the multi-echelon perspective , 2019, International Journal of Production Economics.

[135]  Álvaro Segura,et al.  Sustainable and flexible industrial human machine interfaces to support adaptable applications in the Industry 4.0 paradigm , 2019, Int. J. Prod. Res..

[136]  Fansen Kong,et al.  Development of metric method and framework model of integrated complexity evaluations of production process for ergonomics workstations , 2018, Int. J. Prod. Res..

[137]  Daria Battini,et al.  Big size highly customised product manufacturing systems: a literature review and future research agenda , 2019, Int. J. Prod. Res..

[138]  Qian Wang,et al.  Key human factors and their effects on human centered assembly performance , 2019, International Journal of Industrial Ergonomics.

[139]  Alessandro Persona,et al.  A model for rest allowance estimation to improve tasks assignment to operators , 2018, Int. J. Prod. Res..