In vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2 nanocomposite for biomedical applications
暂无分享,去创建一个
[1] Zhixin Kang,et al. Mechanical and corrosion properties of Mg-Gd-Zn-Zr-Mn biodegradable alloy by hot extrusion , 2016 .
[2] A. Cricenti,et al. Glass-ceramic coated Mg-Ca alloys for biomedical implant applications. , 2016, Materials science & engineering. C, Materials for biological applications.
[3] Hyoun‐Ee Kim,et al. MgF2-coated porous magnesium/alumina scaffolds with improved strength, corrosion resistance, and biological performance for biomedical applications. , 2016, Materials science & engineering. C, Materials for biological applications.
[4] M. Escudero,et al. Phytic acid coating on Mg-based materials for biodegradable temporary endoprosthetic applications , 2016 .
[5] A. Ismail,et al. Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on Mg–Ca alloy , 2016 .
[6] Linan Jia,et al. Morphology and composition of coatings based on hydroxyapatite-chitosan-RuCl3 system on AZ91D prepared by pulsed electrochemical deposition , 2016 .
[7] Shahrouz Zamani Khalajabadi,et al. The effect of MgO on the biodegradation, physical properties and biocompatibility of a Mg/HA/MgO nanocomposite manufactured by powder metallurgy method , 2016 .
[8] Ke Yang,et al. Tailoring the degradation and biological response of a magnesium-strontium alloy for potential bone substitute application. , 2016, Materials science & engineering. C, Materials for biological applications.
[9] Shahrouz Zamani Khalajabadi,et al. Fabrication, bio-corrosion behavior and mechanical properties of a Mg/HA/MgO nanocomposite for biomedical applications , 2015 .
[10] Shahrouz Zamani Khalajabadi,et al. Synthesis, microstructure and biodegradation behavior of nano-Si and nano-ZnO/Si coatings on a Mg/HA/TiO2/MgO nanocomposite , 2015 .
[11] Shahrouz Zamani Khalajabadi,et al. Microstructural characterization, biocorrosion evaluation and mechanical properties of nanostructured ZnO and Si/ZnO coated Mg/HA/TiO2/MgO nanocomposites , 2015 .
[12] Liangchi Zhang,et al. Microstructure and material properties of porous hydroxyapatite-zirconia nanocomposites using polymethyl methacrylate powders , 2015 .
[13] M. Gupta,et al. Development of high performance Mg–TiO2 nanocomposites targeting for biomedical/structural applications , 2015 .
[14] Shahrouz Zamani Khalajabadi,et al. Effect of mechanical alloying on the phase evolution, microstructure and bio-corrosion properties of a Mg/HA/TiO2/MgO nanocomposite , 2014 .
[15] I. Jones,et al. The role of β1′ precipitates in the bio-corrosion performance of Mg–3Zn in simulated body fluid , 2014 .
[16] S. Németh,et al. Hydrothermally deposited protective and bioactive coating for magnesium alloys for implant application , 2014 .
[17] Zhigang Xu,et al. Recent advances on the development of magnesium alloys for biodegradable implants. , 2014, Acta biomaterialia.
[18] Abdalla Abdal-hay,et al. Preparation and characterization of vertically arrayed hydroxyapatite nanoplates on electrospun nanofibers for bone tissue engineering , 2014 .
[19] S. Omanovic,et al. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: The influence of immersion time , 2014 .
[20] P. Das,et al. Biocompatible nanocrystalline natural bonelike carbonated hydroxyapatite synthesized by mechanical alloying in a record minimum time. , 2014, Materials science & engineering. C, Materials for biological applications.
[21] R. K. Singh Raman,et al. In vitro investigation of biodegradable polymeric coating for corrosion resistance of Mg-6Zn-Ca alloy in simulated body fluid. , 2014, Materials science & engineering. C, Materials for biological applications.
[22] Liguo Wang,et al. Formation mechanism of Ca-deficient hydroxyapatite coating on Mg–Zn–Ca alloy for orthopaedic implant , 2014 .
[23] M. Potin-Gautier,et al. Alternative conversion coatings to chromate for the protection of magnesium alloys , 2014 .
[24] P. Chu,et al. Multilevel surface engineering of nanostructured TiO2 on carbon-fiber-reinforced polyetheretherketone. , 2014, Biomaterials.
[25] N. Rajendran,et al. Bioactive HA/TiO2 coating on magnesium alloy for biomedical applications , 2014 .
[26] B. Hadzima,et al. Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD). , 2014, Materials science & engineering. C, Materials for biological applications.
[27] J. Byrne,et al. Investigation of the inhibitory effects of TiO(2) on the β-amyloid peptide aggregation. , 2014, Materials science & engineering. C, Materials for biological applications.
[28] M. Kannan,et al. Biodegradable polymer for sealing porous PEO layer on pure magnesium: an in vitro degradation study , 2014 .
[29] C. Grillo,et al. Cellular response to rare earth mixtures (La and Gd) as components of degradable Mg alloys for medical applications. , 2014, Colloids and surfaces. B, Biointerfaces.
[30] Xiaodong Wu,et al. Calcium phosphate glass/MgF2 double layered composite coating for improving the corrosion resistance of magnesium alloy , 2014 .
[31] Ke Yang,et al. Preliminary research on a novel bioactive silicon doped calcium phosphate coating on AZ31 magnesium alloy via electrodeposition. , 2014, Materials science & engineering. C, Materials for biological applications.
[32] M. Cerruti,et al. Magnesium implant alloy with low levels of strontium and calcium: the third element effect and phase selection improve bio-corrosion resistance and mechanical performance. , 2014, Materials science & engineering. C, Materials for biological applications.
[33] B. Nasiri-Tabrizi,et al. Phase transitions and structural changes of nanostructured chlorapatite under thermal treatment , 2014 .
[34] M. Medraj,et al. Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys , 2014 .
[35] E. Aghion,et al. Effect of diffusion coating of Nd on the corrosion resistance of biodegradable Mg implants in simulated physiological electrolyte. , 2013, Acta biomaterialia.
[36] Yufeng Zheng,et al. Plasma enhanced chemical vapor deposited silicon coatings on Mg alloy for biomedical application , 2013 .
[37] Yufeng Zheng,et al. Novel Magnesium Alloys Developed for Biomedical Application: A Review , 2013 .
[38] M. Ahmadian,et al. Comparative evaluation of biocompatibility of dense nanostructured and microstructured Hydroxyapatite/Titania composites. , 2013, Materials science & engineering. C, Materials for biological applications.
[39] Yangde Li,et al. Microstructure, mechanical properties, in vitro degradation and cytotoxicity evaluations of Mg-1.5Y-1.2Zn-0.44Zr alloys for biodegradable metallic implants. , 2013, Materials science & engineering. C, Materials for biological applications.
[40] K. Ishikawa,et al. Effects of solution pH on the structure and biocompatibility of Mg-containing TiO2 layer fabricated on titanium by hydrothermal treatment , 2013 .
[41] M. Fathi,et al. Fabrication and characterization of nanocrystalline Mg-substituted fluorapatite by high energy ball milling , 2013 .
[42] X. Ma,et al. Microstructure, mechanical property and corrosion behavior of interpenetrating (HA+β-TCP)/MgCa composite fabricated by suction casting. , 2013, Materials science & engineering. C, Materials for biological applications.
[43] A. Srinivasan,et al. Electrochemical polymerization of pyrrole over AZ31 Mg alloy for biomedical applications , 2013 .
[44] H. Bakhsheshi‐Rad,et al. Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys , 2012 .
[45] T.S.N. Sankara Narayanan,et al. Electrophoretic deposition of nanocomposite (HAp + TiO2) on titanium alloy for biomedical applications , 2012 .
[46] Wei-jia Tang,et al. On the corrosion behaviour of newly developed biodegradable Mg-based metal matrix composites produced by in situ reaction , 2012 .
[47] M. Fathi,et al. In vitro bioactivity evaluation of magnesium-substituted fluorapatite nanopowders , 2012 .
[48] Yufeng Zheng,et al. In vitro degradation performance and biological response of a Mg-Zn-Zr alloy , 2011 .
[49] Liguo Wang,et al. In vivo degradation behavior of Ca-deficient hydroxyapatite coated Mg-Zn-Ca alloy for bone implant application. , 2011, Colloids and surfaces. B, Biointerfaces.
[50] M. Gibson,et al. Electrochemical behaviour and corrosion of Mg-Y alloys , 2011 .
[51] Yufeng Zheng,et al. Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg-Ca alloy. , 2011, Acta biomaterialia.
[52] Junhua Hu,et al. Effect of electrodeposition modes on surface characteristics and corrosion properties of fluorine-doped hydroxyapatite coatings on Mg-Zn-Ca alloy , 2011 .
[53] T.S.N. Sankara Narayanan,et al. Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS , 2011 .
[54] M. Fathi,et al. Microstructure, mechanical properties and bio-corrosion evaluation of biodegradable AZ91-FA nanocomposites for biomedical applications , 2010 .
[55] K. Hong,et al. Comparative property study on extruded Mg–HAP and ZM61–HAP composites , 2010 .
[56] Yufeng Zheng,et al. Microstructure, mechanical property, bio-corrosion and cytotoxicity evaluations of Mg/HA composites , 2010 .
[57] Chandy N. George,et al. Synthesis of nanocrystalline magnesium titanate by an auto-igniting combustion technique and its structural, spectroscopic and dielectric properties , 2010 .
[58] F. Beckmann,et al. In vivo corrosion and corrosion protection of magnesium alloy LAE442. , 2010, Acta biomaterialia.
[59] S. Guan,et al. In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process. , 2010, Acta biomaterialia.
[60] Andrej Atrens,et al. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation , 2010 .
[61] Yang Song,et al. Research on an Mg-Zn alloy as a degradable biomaterial. , 2010, Acta biomaterialia.
[62] M. Fathi,et al. Fabrication and characterization of fluoridated hydroxyapatite nanopowders via mechanical alloying , 2009 .
[63] K. Khor,et al. An interfacial study of sol–gel-derived magnesium apatite coatings on Ti6Al4V substrates , 2008 .
[64] Yufeng Zheng,et al. The development of binary Mg-Ca alloys for use as biodegradable materials within bone. , 2008, Biomaterials.
[65] P. Ruiz,et al. Partial oxidation of methane towards hydrogen production over a promising class of catalysts: Rh supported on Ti-modified MgO , 2007 .
[66] M. Störmer,et al. Biodegradable magnesium-hydroxyapatite metal matrix composites. , 2007, Biomaterials.
[67] Karl-Heinz Waldmann,et al. Safety and efficacy of bioabsorbable magnesium alloy stents in porcine coronary arteries , 2006, Catheterization and cardiovascular interventions : official journal of the Society for Cardiac Angiography & Interventions.
[68] Tadashi Kokubo,et al. How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.
[69] Alexis M Pietak,et al. Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.
[70] Seeram Ramakrishna,et al. Aqueous mediated synthesis of bioresorbable nanocrystalline hydroxyapatite , 2005 .
[71] Csaba Vermes,et al. Concentration- and composition-dependent effects of metal ions on human MG-63 osteoblasts. , 2002, Journal of biomedical materials research.
[72] Andrew T. S. Wee,et al. An XPS investigation of the oxidation/corrosion of melt-spun Mg , 2000 .
[73] M. Senna,et al. Mechanochemical effects on the precursor formation and microwave dielectric characteristics of MgTiO3 , 1996 .