Wafer-level packaging technology for extended global wiring and inductors

Wafer level packaging (WLP) technology, originally introduced for thin film redistribution layers, offers novel opportunities for extended global wiring and passives and has been used to integrate transmission lines and state-of-the-art high Q on-chip inductors on top of a five-levels-of-metal (5 ML) Cu/oxide back-end of line (BEOL) 20/spl Omega/cm silicon process. The transmission lines and inductors are realized above the passivation using thick post-processed dielectric (BCB, /spl epsiv//sub r/=2.65) and Cu layers. Measurements on the BEOL before and after post-processing show no significant shifts for all 5 metal layers. Post-processed 50/spl Omega/ transmission lines. have losses below -0.1dB/mm@25GHz; a InH inductor has a peak Q-factor of 38 at 4.7GHz with resonance frequency (F/sub res/) of 29GHz, the Q-factor tops 30 over 2.6-8.6GHz. Patterned polysilicon ground shields further improve the performance: a Q-factor increase of 90% was demonstrated at 7GHz for a 2.25nH inductor.

[1]  J. Malinowski,et al.  High Q inductors in a SiGe BiMOS process utilizing a thick metal process add-on module , 1999, Proceedings of the 1999 Bipolar/BiCMOS Circuits and Technology Meeting (Cat. No.99CH37024).

[2]  S. Decoutere,et al.  High Q inductor add-on module in thick Cu/SiLK/sup TM/ single damascene , 2001, Proceedings of the IEEE 2001 International Interconnect Technology Conference (Cat. No.01EX461).

[3]  Eric Beyne,et al.  MULTI-LAYER THIN-FILM MCM-D FOR THE INTEGRATION OF HIGH PERFORMANCE WIRELESS FRONT-END SYSTEMS , 2001 .

[4]  C. Yue,et al.  On-chip Spiral Inductors With Patterned Ground Shields For Si-based RF IC's , 1997, Symposium 1997 on VLSI Circuits.

[5]  Steven Brebels,et al.  Multilayer thin-film MCM-D for the integration of high-performance RF and microwave circuits , 2001 .