Optimised high-efficiency Class E radio frequency power amplifier for wide bandwidth and high harmonics suppression

A Class E power amplifier offers high efficiency approaching 100% for an ideal case. A new wide bandwidth Class E power amplifier design has been introduced combining a parallel-circuit load network with reactance compensation technique and high-order harmonic suppression circuit. The proposed topology has been discussed based on theory and its experimental verification. A hardware prototype was designed and built, and measurement results showed drain efficiency of 70% and second harmonic rejection of more than 84 dBc (as well as higher harmonics), and output power level more than 6.5 W with ±0.5 dB power flatness, across very high frequency (VHF) band (136-174 MHz). The performance achieved demonstrated highest harmonic suppression across wide bandwidth for VHF range according to authors' knowledge. Simulations of power performance (i.e. efficiency and output power) were verified by measurements, and good agreements were obtained.

[1]  Frederick H. Raab,et al.  Idealized operation of the class E tuned power amplifier , 1977 .

[2]  Fadhel M. Ghannouchi,et al.  Analysis and evaluation of harmonic suppression of lumped-element networks suitable for high-frequency class-E operation condition approximation , 2008 .

[3]  A.V. Grebennikov,et al.  Class E with parallel circuit - a new challenge for high-efficiency RF and microwave power amplifiers , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[4]  E. M. Jones,et al.  Microwave Filters, Impedance-Matching Networks, and Coupling Structures , 1980 .

[5]  Vitaliy Zhurbenko,et al.  A compact broadband nonsynchronous noncommensurate impedance transformer , 2012 .

[6]  Claudio Paoloni,et al.  Design and computer simulation of high efficiency broadband parallel-circuit Class E RF power amplifier with reactance compensation technique , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.

[7]  José Luis Jiménez Martin,et al.  Dual Band High Efficiency Class Ce Power Amplifier Based on CRLH Diplexer , 2009 .

[8]  A. Mediano,et al.  High-Efficiency Broadband Parallel-Circuit Class E RF Power Amplifier With Reactance-Compensation Technique , 2008, IEEE Transactions on Microwave Theory and Techniques.

[9]  Hong-Yeh Chang,et al.  A High Efficiency Broadband Class-E Power Amplifier Using a Reactance Compensation Technique , 2010, IEEE Microwave and Wireless Components Letters.

[10]  Lokesh Anand,et al.  Second harmonic reduction in broadband HF/VHF/UHF class E RF power amplifiers , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[11]  Sheng-Fuh Chang,et al.  Investigation of Wideband Load Transformation Networks for Class-E Switching-Mode Power Amplifiers , 2012, IEEE Transactions on Microwave Theory and Techniques.

[12]  Ernesto Limiti,et al.  Dual Fed Distributed Amplifier With Controlled Termination Adjustment , 2013 .

[13]  No Sokal,et al.  CLASS-E - NEW CLASS OF HIGH-EFFICIENCY TUNED SINGLE-ENDED SWITCHING POWER AMPLIFIERS , 1975 .

[14]  R. H. Jansen,et al.  An Extended Topology of Parallel-Circuit Class-E Power Amplifier to Account for Larger Output Capacitances , 2011, IEEE Transactions on Microwave Theory and Techniques.

[15]  Ekkaphol Khansalee,et al.  A high efficiency VHF GaN HEMT class E power amplifier for public and homeland security applications , 2010, 2010 Asia-Pacific Microwave Conference.

[16]  Ernesto Limiti,et al.  Parametric oscillations in distributed power amplifiers , 2009 .