Recent developments with a prototype fan-beam optical CT scanner

The latest design of a prototype fan-beam optical computed tomography scanner is presented. A new beam creation system consists of a 635 nm laser diode module with variable, DC voltage-controlled beam intensity. A change in scanner alignment allows for the elimination of ring artefacts caused by data corruption that is spaced symmetrically across the detector array. These artefacts, as well as a pair of streaking artefacts caused by flask seams, are removed in sinogram space. A flask registration technique has been developed that allows for accurate, reproducible dosimeter placement. Protocol investigations with gel dosimeters have indicated the importance of: i) proper cooling techniques during gel manufacture, and ii) scanning the dosimeter while it is at room temperature. Latest reconstructions of a normoxic polymer gel dosimeter are presented as an indicator of current system performance.

[1]  Clive Baldock,et al.  Light-scattering-induced artifacts in a complex polymer gel dosimetry phantom. , 2009, Applied optics.

[2]  J. Adamovics,et al.  A new approach to radiochromic three-dimensional dosimetry-polyurethane , 2004 .

[3]  Mark Oldham,et al.  Commissioning and benchmarking a 3D dosimetry system for clinical use. , 2011 .

[4]  M. Oldham,et al.  Polymer gel dosimetry. , 2010, Physics in medicine and biology.

[5]  T. Olding,et al.  Cone beam optical computed tomography for gel dosimetry I: scanner characterization , 2010, Physics in medicine and biology.

[6]  J. Gore,et al.  Radiation dose distributions in three dimensions from tomographic optical density scanning of polymer gels: II. Optical properties of the BANG polymer gel. , 1996, Physics in medicine and biology.

[7]  C. Baldock,et al.  Investigation of radiological properties and water equivalency of PRESAGE dosimeters. , 2011, Medical physics.

[8]  K. Jordan,et al.  Radiochromic leuco dye micelle hydrogels: I. Initial investigation , 2009, Physics in medicine and biology.

[9]  K. McAuley,et al.  Initial experience with a commercial cone beam optical CT unit for polymer gel dosimetry I: Optical dosimetry issues , 2006 .

[10]  J. Gore,et al.  Radiation dose distributions in three dimensions from tomographic optical density scanning of polymer gels: I. Development of an optical scanner. , 1996, Physics in medicine and biology.

[11]  David A. Rudko,et al.  A prototype fan-beam optical CT scanner for polymer gel dosimetry , 2009 .

[12]  Preliminary investigations with a photodiode-based fan-beam optical CT scanner , 2010 .

[13]  P. Vial,et al.  Radiological properties of the PRESAGE and PAGAT polymer dosimeters. , 2008, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[14]  Clive Baldock,et al.  Modelling optical scattering artefacts for varying pathlength in a gel dosimeter phantom , 2009, Physics in medicine and biology.