Impact of the nickel interlayer on the electrical resistance of tin–tin interface submitted to fretting loading

Abstract The behaviour of the tin/tin interface for electrical contact application is addressed in this paper. Two coating systems were studied: a bronze–tin coating system and a bronze–nickel–tin coating system. The transition amplitude δ t from partial slip (P.S) to gross slip (G.S), defining the domains of infinite and finite lifetime of the contact, was found using the variable–displacement–amplitude methodology (VDA). Constant–displacement–amplitude (CDA) tests were performed in order to determine the influence of the nickel interlayer on the performance of the electrical contact. The conducted analysis concluded that there is no influence of the nickel interlayer on the electrical endurance during G.S. However, the nickel interlayer, which serves as a diffusion barrier, eliminates the diffusion of copper through the tin coating; thus preventing the formation of copper oxides on the top surface. It concludes that the application of the nickel underlayer by maintaining high tin–tin friction coefficient extends the P.S domain and therefore increases the reliability of the electrical contact.

[1]  Siegfried Fouvry,et al.  The fretting sliding transition as a criterion for electrical contact performance , 2001 .

[2]  E. Rabinowicz,et al.  Fretting failure of electroplated gold contacts , 1991 .

[3]  R.D. Malucci,et al.  Accelerated testing of tin plated copper alloy contacts , 1997, Electrical Contacts - 1997 Proceedings of the Forty-Third IEEE Holm Conference on Electrical Contacts.

[4]  Young Woo Park,et al.  Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature , 2008 .

[5]  M. Antler,et al.  Survey of Contact Fretting in Electrical Connectors , 1985 .

[6]  R.D. Malucci,et al.  Characteristics of films developed in fretting experiments on tin plated contacts , 1999, Electrical Contacts - 1999. Proceedings of the Forty-Fifth IEEE Holm Conference on Electrical Contacts (Cat. No.99CB36343).

[7]  Nannaji Saka,et al.  Friction and failure of electroplated sliding contacts , 1991 .

[8]  S. Jacobson,et al.  Surface damage, adhesion and contact resistance of silver plated copper contacts subjected to fretting motion , 1993 .

[9]  Tetsuya Osaka,et al.  Preparation and characterization of electroplated amorphous gold–nickel alloy film for electrical contact applications , 2005 .

[10]  M. Antler,et al.  Fretting corrosion of gold-plated connector contacts☆ , 1981 .

[11]  Staffan Jacobson,et al.  Stationary loading, fretting and sliding of silver coated copper contacts : influence of corrosion films and corrosive atmosphere , 1997 .

[12]  M. Antler,et al.  Electrical effects of fretting connector contact materials: A review , 1985 .

[13]  Young Woo Park,et al.  Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts , 2006 .

[14]  K. Lee,et al.  Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics , 2007 .

[15]  K. Lee,et al.  Effect of temperature on the fretting corrosion of tin plated copper alloy contacts , 2007 .

[16]  S. Jacobson,et al.  Gross plastic fretting mechanical deterioration of silver coated electrical contacts , 1996 .

[17]  C. Evans.  Connector Finishes: Tin in Place of Gold , 1980 .

[18]  Raymond D. Mindlin,et al.  Compliance of elastic bodies in contact , 1949 .

[19]  S. Jacobson,et al.  Gross plastic fretting — examination of the gross weld regime , 1996 .