Determination of GaN HEMT reliability by monitoring IDSS

Abstract In this paper, we investigate the importance and necessity to determine the reliability of GaN HEMT devices by monitoring I DSS during accelerated DC life-test measurements at elevated ambient temperatures. The influence of interrupting this test and cooling the device to measure I DSS at room temperature is investigated. But also methods are investigated to replace this measurement to speed up the reliability measurements and reduce the thermo-mechanical stress induced due to periodically cooling and heating of the devices. One method parameter to monitor is the so called intrinsic I DSS , which is the parameter measured at the ambient temperature of the life-test. The investigation shows that monitoring the intrinsic I DSS is a solid tool to determine the life-time, but too often measurement of this parameter could add additional stress to the device. In addition we saw that intermediate measurements of the output and transfer characteristics did not introduce measureable addition stress as suspected. We also observed that for stress tests at constant P Diss the drift of the gate voltage can be used as failure criterion, although it has no linear relationship to I DSS and therefore the gate voltage drifts more than I DSS and leads to more conservative life-time.