Effects of acid attack and cassava flour dosage on the interfacial transition zone thickness, durability and mechanical characteristics of high-strength (HS) concrete

[1]  J. Thuo,et al.  Analysing the Effect of Cassava Flour as a Mixture on the Physical, Mechanical, and Durability Properties of High-Strength Concrete , 2022, Civil Engineering Journal.

[2]  R. Pannem,et al.  Enhanced chemical resistance to sulphuric acid attack by reinforcing Graphene Oxide in Ordinary and Portland Pozzolana cement mortars , 2022, Case Studies in Construction Materials.

[3]  Z. Dolníček,et al.  Study of interfacial transition zone in concrete with SCMs , 2022, Journal of Physics: Conference Series.

[4]  G. Golewski.  Fracture Performance of Cementitious Composites Based on Quaternary Blended Cements , 2022, Materials.

[5]  M. Zubair,et al.  Biochar Produced from Saudi Agriculture Waste as a Cement Additive for Improved Mechanical and Durability Properties—SWOT Analysis and Techno-Economic Assessment , 2022, Materials.

[6]  Yongdong Xu,et al.  Hydration reaction and compressive strength of small amount of silica fume on cement-fly ash matrix , 2022, Case Studies in Construction Materials.

[7]  A. Beskopylny,et al.  High-Performance Concrete Nanomodified with Recycled Rice Straw Biochar , 2022, Applied Sciences.

[8]  G. Cordeiro,et al.  Sustainable Cements Containing Sugarcane Bagasse Ash and Limestone: Effects on Compressive Strength and Acid Attack of Mortar , 2022, Sustainability.

[9]  A. J. Babafemi,et al.  Influence of Sugarcane Bagasse Ash and Silica Fume on the Mechanical and Durability Properties of Concrete , 2022, Materials.

[10]  Rakesh Kumar,et al.  Utilization of sugarcane bagasse ash in mortar and concrete: A review , 2022, Materials Today: Proceedings.

[11]  J. Thuo,et al.  Ductility and cracking behavior of reinforced coconut shell concrete beams incorporated with coconut shell ash , 2022, Results in Engineering.

[12]  A. Khan.  Assessment of pozzolanic material for manufacturing of Portland Pozzolana cement (PPC) by the comparison of Ordinary Portland cement (OPC) , 2022, Acta Geodynamica et Geomaterialia.

[13]  Bassirou Kone,et al.  Experimental Effect of Cassava Starch and Rice Husk Ash on Physical and Mechanical Properties of Concrete , 2022, international journal of engineering trends and technology.

[14]  David Sinkhonde,et al.  Representativity of morphological measurements and 2-d shape descriptors on mineral admixtures , 2022, Results in Engineering.

[15]  M. Skaf,et al.  Elastic stiffness estimation of aggregate–ITZ system of concrete through matrix porosity and volumetric considerations: explanation and exemplification , 2022, Archives of Civil and Mechanical Engineering.

[16]  Mostafa Abd Elrazek.  Microstructure Study for Effect of Local Admixture in Concrete Durability , 2022, Journal of Hunan University Natural Sciences.

[17]  R. A. Ilyas,et al.  Biocomposite of Cassava Starch-Cymbopogan Citratus Fibre: Mechanical, Thermal and Biodegradation Properties , 2022, Polymers.

[18]  Yuefeng Huang.  We are IntechOpen, the world’s leading publisher of Open Access books Built by scientists, for scientists Implementing Multimodal Biometric Solutions in Embedded Systems Biometrics - Unique and Diverse Applications in Nature, Science, and Technology , 2022 .

[19]  Faiz Shaikh,et al.  Experimental study of the mechanical properties and microstructure of geopolymer paste containing nano-silica from agricultural waste and crystalline admixtures , 2022, Case Studies in Construction Materials.

[20]  J. Berenjian,et al.  Studying of microstructure, interface transition zone and ultrasonic wave velocity of high strength concrete by different aggregates , 2021, Journal of Building Pathology and Rehabilitation.

[21]  S. Anandaraj,et al.  Effects of using white flour, zinc oxide and zinc ash as an admixture in mortar and concrete , 2021, Materials Today: Proceedings.

[22]  Jingpei Li,et al.  Experimental investigations on the durability and degradation mechanism of cast-in-situ recycled aggregate concrete under chemical sulfate attack , 2021 .

[23]  Jamal A. Abdalla,et al.  Biomass ashes from agricultural wastes as supplementary cementitious materials or aggregate replacement in cement/geopolymer concrete: A comprehensive review , 2021 .

[24]  G. Aouad,et al.  Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments , 2021, Construction and Building Materials.

[25]  K. Pilakoutas,et al.  Chemical attack and corrosion resistance of concrete prepared with electrolyzed water , 2021, Journal of Materials Research and Technology.

[26]  Siyu Wu,et al.  The Role of Supplementary Cementitious Materials (SCMs) in Ultra High Performance Concrete (UHPC): A Review , 2021, Materials.

[27]  T. Awolusi,et al.  Effects of calcined clay, sawdust ash and chemical admixtures on Strength and Properties of concrete for pavement and flooring applications using Taguchi approach , 2021 .

[28]  Wang Qiang,et al.  Recent advances in chemical admixtures for improving the workability of alkali-activated slag-based material systems , 2020 .

[29]  Peng Zhang,et al.  Nanoparticle-reinforced building materials with applications in civil engineering , 2020 .

[30]  M. A. Hariri-Ardebili.  Uncertainty quantification of heterogeneous mass concrete in macro-scale , 2020 .

[31]  A. Jivkov,et al.  On the effect of ITZ thickness in meso-scale models of concrete , 2020, Construction and Building Materials.

[32]  C. Kabubo,et al.  The Effect of Cassava Starch on the Durability Characteristics of Concrete , 2020 .

[33]  K. Hossain,et al.  Arrowroot as bio-admixture for performance enhancement of concrete , 2020 .

[34]  J. Mwero,et al.  Evaluating Superplasticizer Compatibility in the Production of High Performance Concrete using Portland Pozzolana Cement CEM II/B-P , 2020 .

[35]  V. John,et al.  Efficiency of Portland-pozzolana cements: Water demand, chemical reactivity and environmental impact , 2020, Construction and Building Materials.

[36]  Jian Zheng,et al.  The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model , 2020, Applied Sciences.

[37]  Tao Wu,et al.  Effect of Aggregate Size on Strength Characteristics of High Strength Lightweight Concrete , 2020, Materials.

[38]  N. Masruchin,et al.  Characteristics of Bioplastic Made from Cassava Starch Filled with Fibers from Oil Palm Trunk at Various Amount , 2020, IOP Conference Series: Earth and Environmental Science.

[39]  Z. Jamshidzadeh,et al.  Assessment of compressive strength and durability of silica fume-based concrete in acidic environment , 2020, Innovative Infrastructure Solutions.

[40]  R. Kliukas,et al.  Reinforced Spun Concrete Poles—Case Study of Using Chemical Admixtures , 2020, Materials.

[41]  Ravi Kumar Sandal,et al.  Bond-slip characterization of the interfacial transition zone of cement concrete and granite rock using push-out test , 2020 .

[42]  C. Kabubo,et al.  Experimental Investigation of the Physical and Mechanical Properties of Cassava Starch Modified Concrete , 2019 .

[43]  Tao Ji,et al.  Comparison of corrosion resistance mechanism between ordinary Portland concrete and alkali-activated concrete subjected to biogenic sulfuric acid attack , 2019 .

[44]  John Mwero,et al.  Compressive Strength and Slump Prediction of Two Blended Agro Waste Materials Concretes , 2019, The Open Civil Engineering Journal.

[45]  S. Chu.  Effect of paste volume on fresh and hardened properties of concrete , 2019, Construction and Building Materials.

[46]  W. Schmidt,et al.  Effect of cassava starch on shrinkage characteristics of concrete† , 2019 .

[47]  H. Kühne,et al.  Rice husk ash as a sustainable supplementary cementitious material for improved concrete properties , 2019, African Journal of Science, Technology, Innovation and Development.

[48]  S. A. Zareei,et al.  Microstructure, strength, and durability of eco-friendly concretes containing sugarcane bagasse ash , 2018, Construction and Building Materials.

[49]  A. Jindal.  Behavioural study of pavement quality concrete containing construction, industrial and agricultural wastes , 2018, International Journal of Pavement Research and Technology.

[50]  T. Tavio,et al.  Comparison of Compressive and Tensile Strengths of Dry-Cast Concrete with Ordinary Portland and Portland Pozzolana Cements , 2018, Civil Engineering Journal.

[51]  Hongbing Chen,et al.  Behavior of meso-scale heterogeneous concrete under uniaxial tensile and compressive loadings , 2018, Construction and Building Materials.

[52]  V. Okumu.  The Suitability of the Kenyan Blended Portland Cements for Structural Concrete Production , 2018 .

[53]  M. Berra,et al.  Residual Capability of Alkali Binding by Hydrated Pozzolanic Cements in Long-Service Concrete Structures , 2018, Advances in Materials Science and Engineering.

[54]  G. Golewski,et al.  Potential of siliceous fly ash and silica fume as a substitute for binder in cementitious concretes , 2018 .

[55]  Hairul Abral,et al.  Effect of Precipitated Calcium Carbonate on Physical, Mechanical and Thermal Properties of Cassava Starch Bioplastic Composites , 2017 .

[56]  Ali Sadrmomtazi,et al.  Effect of fly ash and silica fume on transition zone, pore structure and permeability of concrete , 2017 .

[57]  M. V. S. Reddy,et al.  Groundnut Shell Ash as Partial Replacement of Cement in Concrete , 2017 .

[58]  S. Barbhuiya,et al.  Behaviour of a Sustainable Concrete in Acidic Environment , 2017 .

[59]  J. Xu,et al.  Modification effects of nanosilica on the interfacial transition zone in concrete: A multiscale approach , 2017 .

[60]  J. Molinari,et al.  A mesoscale fracture model for concrete , 2017 .

[61]  Lianqing Liu,et al.  A Bioinspired Alginate-Gum Arabic Hydrogel with Micro-/Nanoscale Structures for Controlled Drug Release in Chronic Wound Healing. , 2017, ACS applied materials & interfaces.

[62]  O. Restrepo-Baena,et al.  Microstructural analysis of interfacial transition zone (ITZ) and its impact on the compressive strength of lightweight concretes , 2017 .

[63]  O. Thomas,et al.  The Effect of Local Brewery Waste and Bitter Cassava Flour on Compressive Strength and Shrinkage of Plaster Mortar for Eco- House , 2017 .

[64]  Ameer A. Hilal,et al.  Microstructure of Concrete , 2016 .

[65]  V. V. Arora,et al.  Flexural and fatigue behavior of prestressed concrete beams made with portland pozzolana cement , 2016 .

[66]  Qing Xu,et al.  Preparation and Properties of Cassava Starch-based Wood Adhesives , 2016 .

[67]  Suhad M. Abd,et al.  EFFECT OF USING CORN STARCH AS CONCRETE ADMIXTURE , 2016 .

[68]  Pankaj Munjal,et al.  Role of water/cement ratio on strength development of cement mortar , 2015 .

[69]  Oladele Isiaka Oluwole,et al.  Effects of Cassava Starch and Natural Rubber as Binders on the Flexural and Water Absorption Properties of Recycled Paper Pulp Based Composites , 2015 .

[70]  A. A. Akindahunsi,et al.  Strength and Durability Properties of Concrete with Starch Admixture , 2015 .

[71]  Chun-Tao Chen,et al.  Strength development of lime–pozzolana pastes with silica fume and fly ash , 2015 .

[72]  A. Chaipanich,et al.  Thermogravimetry analysis, compressive strength and thermal conductivity tests of non-autoclaved aerated Portland cement–fly ash–silica fume concrete , 2015, Journal of Thermal Analysis and Calorimetry.

[73]  M. Amin,et al.  Effect of using different types of nano materials on mechanical properties of high strength concrete , 2015 .

[74]  Kazeem K. Adewole,et al.  Effect of Nigerian Portland-Limestone Cement Grades on Concrete Compressive Strength , 2015 .

[75]  M. Santhanam,et al.  Development of sugarcane bagasse ash based Portland pozzolana cement and evaluation of compatibility with superplasticizers , 2014 .

[76]  Metwally A. Abd Elaty.  Compressive strength prediction of Portland cement concrete with age using a new model , 2014 .

[77]  Z. Tan,et al.  The ITZ microstructure, thickness and porosity in blended cementitious composite: Effects of curing age, water to binder ratio and aggregate content , 2014 .

[78]  Fareed Ahmed Memon,et al.  Compressive Strength and Microstructure of Sugar Cane Bagasse Ash Concrete , 2014 .

[79]  W. Ho,et al.  Nanomaterials for environmental applications , 2014 .

[80]  Jikai Zhou,et al.  Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete , 2013 .

[81]  Jianzhuang Xiao,et al.  Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete , 2013 .

[82]  Chunhua Shen,et al.  Efficiency of mineral admixtures in concrete: Microstructure, compressive strength and stability of hydrate phases , 2013 .

[83]  A. Dufresne,et al.  Potential of using multiscale kenaf fibers as reinforcing filler in cassava starch-kenaf biocomposites. , 2013, Carbohydrate polymers.

[84]  Mohammad Ismail,et al.  Performance of natural rubber latex modified concrete in acidic and sulfated environments , 2012 .

[85]  F. Bektaş,et al.  Performance of ground clay brick in ASR-affected concrete: Effects on expansion, mechanical properties and ASR gel chemistry , 2012 .

[86]  F. Okafor.  THE PERFORMANCE OF CASSAVA FLOUR AS A WATER-REDUCING ADMIXTURE FOR CONCRETE , 2010 .

[87]  Chai Jaturapitakkul,et al.  Effect of fly ash fineness on compressive strength and pore size of blended cement paste , 2005 .