Treadmill walking of the pneumatic biped Lucy: Walking at different speeds and step-lengths

Actuators with adaptable compliance are gaining interest in the field of legged robotics due to their capability to store motion energy and to exploit the natural dynamics of the system to reduce energy consumption while walking and running. To perform research on compliant actuators we have built the planar biped Lucy. The robot has six actuated joints, the ankle, knee and hip of both legs with each joint powered by two pleated pneumatic artificial muscles in an antagonistic setup. This makes it possible to control both the torque and the stiffness of the joint. Such compliant actuators are used in passive walkers to overcome friction when walking over level ground and to improve stability. Typically, this kind of robots is only designed to walk with a constant walking speed and step-length, determined by the mechanical design of the mechanism and the properties of the ground. In this paper, we show that by an appropriate control, the robot Lucy is able to walk at different speeds and step-lengths and that adding and releasing weights does not affect the stability of the robot. To perform these experiments, an automated treadmill was built

[1]  William A. Gruver,et al.  Control of a biped robot in the double-support phase , 1992, IEEE Trans. Syst. Man Cybern..

[2]  M. Hirose,et al.  Development of Humanoid Robot ASIMO , 2001 .

[3]  Daniel E. Koditschek,et al.  Hybrid zero dynamics of planar biped walkers , 2003, IEEE Trans. Autom. Control..

[4]  Vladimir B. Larin,et al.  A Note on a Model Hopping Machine , 2002 .

[5]  Russ Tedrake,et al.  Efficient Bipedal Robots Based on Passive-Dynamic Walkers , 2005, Science.

[6]  Masahiro Fujita,et al.  A small biped entertainment robot , 2002, IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, 2003. Proceedings. 2003.

[7]  Vladimir B. Larin,et al.  Dynamic output feedback compensation of external disturbances , 2006 .

[8]  Miomir Vukobratovic,et al.  Note on the Article "Zero-Moment Point - Thirty Five Years of its Life" , 2005, Int. J. Humanoid Robotics.

[9]  Shi-Chung Chang,et al.  Optimal control of a queueing system with two interacting service stations and three classes of impatient tasks , 1988 .

[10]  Vladimir B. Larin,et al.  On static output-feedback stabilization of a periodic system , 2006 .

[11]  Vladimir B. Larin.  A Note on a Walking Machine Model , 2003 .

[12]  T. V. Zavrazhina.  Control of the spatial motions of a gantry manipulator with elastic links , 2006 .

[13]  BJÖRN VERRELST,et al.  Motion Generation and Control for the Pneumatic Biped "Lucy" , 2006, Int. J. Humanoid Robotics.

[14]  Dirk Lefeber,et al.  The Concept and Design of Pleated Pneumatic Artificial Muscles , 2001 .

[15]  Vladimir B. Larin.  A 3D Model of One-Legged Hopping Machine , 2004 .

[16]  Vladimir B. Larin,et al.  A Control Algorithm for a 3D Hopping Machine , 2004 .

[17]  Bram Vanderborght,et al.  Exploiting adaptable passive behaviour to influence natural dynamics applied to legged robots , 2005, Robotica.

[18]  T. V. Zavrazhina.  Influence of the flexibility of links on the dynamics of a multilink robot manipulator , 2007 .

[19]  A. Kuo,et al.  Active control of lateral balance in human walking. , 2000, Journal of biomechanics.

[20]  Y. Kuroki,et al.  A small biped entertainment robot , 2001, MHS2001. Proceedings of 2001 International Symposium on Micromechatronics and Human Science (Cat. No.01TH8583).

[21]  Bram Vanderborght,et al.  Controlling a bipedal walking robot actuated by pleated pneumatic artificial muscles , 2006, Robotica.