Friction Stir Welding of Low-Carbon Shipbuilding Steel Plates: Microstructure, Mechanical Properties, and Corrosion Behavior

[1]  G. Purcek,et al.  Formability of friction stir processed low carbon steels used in shipbuilding , 2018 .

[2]  Jian Cao,et al.  Numerical design of high depth-to-width ratio friction stir welding , 2018 .

[3]  H. Serizawa,et al.  Impact of friction stir welding on recrystallization of oxide dispersion strengthened ferritic steel , 2017 .

[4]  D. Hattingh,et al.  Tribocorrosion of friction-stir-welded Ti6AL4V in 3.5% NaCl aqueous solution , 2017 .

[5]  Y. Bao,et al.  Enhanced strength and ductility of friction stir welded Cu joint by using large load with extremely low welding and rotation speed , 2017 .

[6]  P. Xue,et al.  Microstructural and Mechanical Evolution of a Low Carbon Steel by Friction Stir Processing , 2017, Metallurgical and Materials Transactions A.

[7]  Yufeng Sun,et al.  Effect of abnormal grain growth on microstructure and mechanical properties of friction stir welded SPCC steel plates , 2017 .

[8]  E. Jimenez-Melero,et al.  Mechanical properties and fracture behaviour of ODS Steel Friction Stir Welds at variable temperatures , 2017 .

[9]  Alexander Kaplan,et al.  Joint properties of ultra thin 430M2 ferritic stainless steel sheets by friction stir welding using pinless tool , 2017 .

[10]  Q. Tian,et al.  Impact of friction stir welding on the microstructure of ODS steel , 2017 .

[11]  Ravi Kumar,et al.  Microstructure and mechanical characterization of friction stir welded high strength low alloy steels , 2017 .

[12]  A. Smith,et al.  Modelling of friction stir welding of DH36 steel , 2017 .

[13]  G. Xie,et al.  The microstructural evolution and impact toughness of nugget zone in friction stir welded X100 pipeline steel , 2016 .

[14]  Z. Ma,et al.  Impact toughness of friction stir processed low carbon steel used in shipbuilding , 2016 .

[15]  N. Murugan,et al.  Influence of tool material on mechanical and microstructural properties of friction stir welded 316L austenitic stainless steel butt joints , 2016 .

[16]  H. Jafarian,et al.  Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding , 2016 .

[17]  T. Nelson,et al.  Controlling hard zone formation in friction stir processed HSLA steel , 2016 .

[18]  Qing Liu,et al.  Textural variation in triple junction region of friction stir welded Mg alloys and its influence on twinning and fracture , 2016 .

[19]  F. Karimzadeh,et al.  Gas tungsten arc welding and friction stir welding of ultrafine grained AISI 304L stainless steel: Microstructural and mechanical behavior characterization , 2015 .

[20]  A. Galloway,et al.  Systematic investigation of the fatigue performance of a friction stir welded low alloy steel , 2015 .

[21]  Z. Ma,et al.  Microstructure, mechanical properties and formability of friction stir processed interstitial-free steel , 2015 .

[22]  T. Pal,et al.  Friction Stir Welding of Steel: Heat Input, Microstructure, and Mechanical Property Co-relation , 2015, Journal of Materials Engineering and Performance.

[23]  A. Ngan,et al.  Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing , 2015 .

[24]  C. Desrayaud,et al.  Banded structures in friction stir welded Al alloys , 2015 .

[25]  H. Fujii,et al.  Microstructural control and mechanical properties in friction stir welding of medium carbon low alloy S45C steel , 2015 .

[26]  Jonathan Martin,et al.  Friction Stir Welding Technology for Marine Applications , 2015 .

[27]  K. Chung,et al.  Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel , 2015 .

[28]  J. Lippold.  Welding Metallurgy and Weldability: Lippold/Welding Metallurgy and Weldability , 2015 .

[29]  Arshad Noor Siddiquee,et al.  Friction Stir Welding of Austenitic Stainless Steel: A Study on Microstructure and Effect of Parameters on Tensile Strength , 2015 .

[30]  A. De,et al.  Cooling rates and peak temperatures during friction stir welding of a high-carbon steel , 2015 .

[31]  A. Galloway,et al.  Effect of tool centreline deviation on the mechanical properties of friction stir welded DH36 steel , 2015 .

[32]  H. Maier,et al.  Improvement of formability of ultrafine-grained materials by post-SPD annealing , 2014 .

[33]  Norman McPherson,et al.  Development of a process envelope for friction stir welding of DH36 steel: A step change , 2014 .

[34]  S. Hayashi,et al.  Grain boundary sliding at high temperature deformation in cold-rolled ODS ferritic steels , 2014 .

[35]  Andrew Ball,et al.  A review of numerical analysis of friction stir welding , 2014 .

[36]  Arshad Noor Siddiquee,et al.  Experimental investigation on deformation and wear of WC tool during friction stir welding (FSW) of stainless steel , 2014, The International Journal of Advanced Manufacturing Technology.

[37]  G. Thewlis,et al.  Transformation Characteristics of Ferrite/Carbide Aggregate in Continuously Cooled, Low Carbon-Manganese Steels , 2014, Metallurgical and Materials Transactions A.

[38]  H. Maier,et al.  Formability of Ultrafine-Grained Interstitial-Free Steels , 2013, Metallurgical and Materials Transactions A.

[39]  Sung-Tae Hong,et al.  Three-dimensional numerical and experimental investigation on friction stir welding processes of ferritic stainless steel , 2013 .

[40]  S. Park,et al.  Grain Structure Development During Friction Stir Welding of Single-Crystal Austenitic Stainless Steel , 2013, Metallurgical and Materials Transactions A.

[41]  K. Dehghani,et al.  Effect of Processing Parameters on the Mechanical Properties of Interstitial Free Steel Subjected to Friction Stir Processing , 2013, Journal of Materials Engineering and Performance.

[42]  Y. Morisada,et al.  Microstructures and mechanical properties evolution during friction stir welding of SK4 high carbon steel alloy , 2012 .

[43]  Mohammad Haghpanahi,et al.  Simulation of material flow in friction stir processing of a cast Al–Si alloy , 2012 .

[44]  Harpreet Singh,et al.  Composite fabrication using friction stir processing—a review , 2012 .

[45]  P. Wanjara,et al.  Review of tools for friction stir welding and processing , 2012 .

[46]  V. Balasubramanian,et al.  Understanding the parameters controlling friction stir welding of AISI 409M ferritic stainless steel , 2011 .

[47]  N. Tsuji,et al.  Friction stir welding of high carbon steel with excellent toughness and ductility , 2010 .

[48]  E. Carter,et al.  Effect of dopants on alumina grain boundary sliding: implications for creep inhibition , 2009 .

[49]  K. Nogi,et al.  Mechanical Properties of Friction Stir Welded Carbon Steel Joints — Friction Stir Welding with and without Transformation , 2008 .

[50]  Z. Ma,et al.  Friction Stir Processing Technology: A Review , 2008 .

[51]  H. Kokawa,et al.  Characteristics of Microstructure in Ultrahigh Carbon Steel Produced during Friction Stir Welding , 2008 .

[52]  P. L. Threadgill,et al.  Terminology in friction stir welding , 2007 .

[53]  Tracy W. Nelson,et al.  Microstructure evolution during FSW/FSP of high strength aluminum alloys , 2005 .

[54]  P. Prangnell,et al.  Grain structure formation during friction stir welding observed by the ‘stop action technique’ , 2005 .

[55]  H. Kokawa,et al.  Microstructures in Friction Stir Welded 304 Austenitic Stainless Steel , 2005 .

[56]  H. Kokawa,et al.  Friction stir welding (FSW) process , 2003 .

[57]  Rajiv S. Mishra,et al.  Microstructural investigation of friction stir welded 7050-T651 aluminium , 2003 .

[58]  T. J. Lienert,et al.  Improved weldability diagram for pulsed laser welded austenitic stainless steels , 2003 .

[59]  J. Kenny,et al.  Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels , 2002 .

[60]  B. Burton.  Interfacial stresses at inclusions during grain-boundary sliding , 2002 .

[61]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[62]  Ji Hyun Kim,et al.  Fracture behavior of heat-affected zone in low alloy steels , 2001 .

[63]  W. Thomas,et al.  Friction stir welding for the transportation industries , 1997 .

[64]  Murray W. Mahoney,et al.  Effects of friction stir welding on microstructure of 7075 aluminum , 1997 .

[65]  M. Hasegawa,et al.  Corrosion Behavior of Ultrafine Grained Austenitic Stainless Steel , 1984 .