Comparison of the effects of submerged laser peening, cavitation peening and shot peening on the improvement of the fatigue strength of magnesium alloy AZ31

[1]  M. Fitzpatrick,et al.  Mechanical surface treatment studies by Bragg edge neutron imaging , 2022, Acta Materialia.

[2]  Ali A. Roostaei,et al.  Multiaxial fatigue behavior of low‐temperature closed‐die forged ZK60 extrusion under proportional and non‐proportional loading , 2022, Fatigue & Fracture of Engineering Materials & Structures.

[3]  H. Soyama,et al.  A Critical Comparative Review of Cavitation Peening and Other Surface Peening Methods , 2022, Journal of Materials Processing Technology.

[4]  N. Tsuji,et al.  In-situ observation of twinning and detwinning in AZ31 alloy , 2022, Journal of Magnesium and Alloys.

[5]  Wenbo Wang,et al.  Enabling High-Performance Surfaces of Biodegradable Magnesium Alloys via Femtosecond Laser Shock Peening with Ultralow Pulse Energy. , 2021, ACS applied bio materials.

[6]  X. Ren,et al.  Study on processing and strengthening mechanisms of mild steel subjected to laser cavitation peening , 2021 .

[7]  Qingyuan Wang,et al.  Effect of ultrasonic peening treatment on the fatigue behaviors of a magnesium alloy up to very high cycle regime , 2021, Journal of Magnesium and Alloys.

[8]  T. Kuriyagawa,et al.  Optimization of Residual Stress Measurement Conditions for a 2D Method Using X-ray Diffraction and Its Application for Stainless Steel Treated by Laser Cavitation Peening , 2021, Materials.

[9]  P. Withers,et al.  Depth-profiling of residual stress and microstructure for austenitic stainless steel surface treated by cavitation, shot and laser peening , 2021, Materials Science and Engineering: A.

[10]  H. Soyama,et al.  Enhancing the Aggressive Intensity of a Cavitating Jet by Introducing Water Flow Holes and a Long Guide Pipe , 2021 .

[11]  M. R. Hill,et al.  Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel , 2021, Journal of Materials Processing Technology.

[12]  F. Pan,et al.  The tribological behavior of a surface-nanocrystallized magnesium alloy AZ31 sheet after ultrasonic shot peening treatment , 2021 .

[13]  S. Bagherifard,et al.  Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy , 2020 .

[14]  H. Jahed,et al.  On the Surface Residual Stress Measurement in Magnesium Alloys Using X-Ray Diffraction , 2020, Materials.

[15]  S. K. Shaha,et al.  Characterization of closed-die forged AZ31B under pure axial and pure shear loading , 2020 .

[16]  T. Sano,et al.  A Mechanism for Inducing Compressive Residual Stresses on a Surface by Laser Peening without Coating , 2020, Metals.

[17]  S. Swaroop,et al.  Strength enhancement of magnesium alloy through equal channel angular pressing and laser shock peening , 2020 .

[18]  Y. Sano.  Quarter Century Development of Laser Peening without Coating , 2020, Metals.

[19]  D. Field,et al.  Effect of gradient microstructures on strengthening and toughening of AZ31 , 2020 .

[20]  W. Macek.  Post-failure fracture surface analysis of notched steel specimens after bending-torsion fatigue , 2019, Engineering Failure Analysis.

[21]  S. K. Shaha,et al.  Multiaxial cyclic behaviour of extruded and forged AZ80 Mg alloy , 2019, International Journal of Fatigue.

[22]  H. Soyama.  Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peening , 2019, Journal of Materials Processing Technology.

[23]  Xing Zhang,et al.  The influence of surface pre-twinning on the friction and wear performance of an AZ31B Mg alloy , 2019, Applied Surface Science.

[24]  Xiaoqin Zeng,et al.  Effective femtosecond laser shock peening on a Mg–3Gd alloy at low pulse energy 430 µJ of 1 kHz , 2019, Journal of Magnesium and Alloys.

[25]  S. Bagherifard.  Enhancing the Structural Performance of Lightweight Metals by Shot Peening , 2019, Advanced Engineering Materials.

[26]  W. Macek.  Fractal analysis of the bending-torsion fatigue fracture of aluminium alloy , 2019, Engineering Failure Analysis.

[27]  D. Field,et al.  Effects of shot peening parameters on gradient microstructure and mechanical properties of TRC AZ31 , 2019, Materials Characterization.

[28]  Jun Liang,et al.  Effect of severe shot peening on corrosion behavior of AZ31 and AZ91 magnesium alloys , 2019, Journal of Alloys and Compounds.

[29]  B. Mao,et al.  Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy , 2018, Applied Surface Science.

[30]  Z. Ren,et al.  The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy , 2018 .

[31]  M. Ge,et al.  Wear behavior of Mg-3Al-1Zn alloy subjected to laser shock peening , 2018 .

[32]  Yalin Lu,et al.  Effect of laser energy on microstructure of Mg-3Al-1Zn alloy treated by LSP , 2018 .

[33]  T. Webster,et al.  Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31. , 2017, Acta biomaterialia.

[34]  S. Narayanswamy,et al.  Effect of high repetition laser shock peening on biocompatibility and corrosion resistance of magnesium , 2017 .

[35]  L. Yang,et al.  Effect of laser shock peening on the stress corrosion cracking of AZ31B magnesium alloy in a simulated body fluid , 2017 .

[36]  M. Ge,et al.  Effect of laser shock peening on microstructure and fatigue crack growth rate of AZ31B magnesium alloy , 2016 .

[37]  Wei Xu,et al.  Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. , 2016, Biomaterials.

[38]  Ewald Macha,et al.  The Control System Based on FPGA Technology For Fatigue Test Stand MZGS-100 PL , 2015 .

[39]  Shervin Eslami Harandi,et al.  Corrosion fatigue fracture of magnesium alloys in bioimplant applications: A review , 2015 .

[40]  B. Hadzima,et al.  Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD). , 2014, Materials science & engineering. C, Materials for biological applications.

[41]  D. Qian,et al.  Effect of the impact energy of various peening techniques on the induced plastic deformation region , 2012 .

[42]  W. Ding,et al.  An eigenstrain-based finite element model and the evolution of shot peening residual stresses during fatigue of GW103 magnesium alloy , 2012 .

[43]  N Birbilis,et al.  Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations. , 2012, Acta biomaterialia.

[44]  W. Ding,et al.  Improvement of fatigue properties by shot peening for Mg–10Gd–3Y alloys under different conditions , 2011 .

[45]  Hitoshi Soyama,et al.  Introduction of compressive residual stress into stainless steel by employing a cavitating jet in air , 2011 .

[46]  Takao Kobayashi,et al.  Fracture surface topography analysis (FRASTA)—Development, accomplishments, and future applications , 2010 .

[47]  C. Leyens,et al.  Shot peening on the high-strength wrought magnesium alloy AZ80—Effect of peening media , 2010 .

[48]  M. K. Kulekci.  Magnesium and its alloys applications in automotive industry , 2008 .

[49]  Naruhiko Mukai,et al.  Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating , 2006 .

[50]  P. Zhang,et al.  Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ80 , 2005 .

[51]  A. Sasoh,et al.  Behavior of bubbles induced by the interaction of a laser pulse with a metal plate in water , 2005 .

[52]  R. Fabbro,et al.  Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour , 1996 .

[53]  F. Wagner,et al.  Stress–strain response of textured AZ31B magnesium alloy under uniaxial tension at the different strain rates , 2013 .