Control of PWM AC motor-drive systems under faulty conditions

[1]  J. Aguayo,et al.  Stator Winding-Fault Detection for the Induction Motor Drives , 2006, Electronics, Robotics and Automotive Mechanics Conference (CERMA'06).

[2]  M. Negrea.  Electromagnetic flux monitoring for detecting faults in electrical machines , 2006 .

[3]  Raphael Romary,et al.  Induction machine fault diagnosis using an external radial flux sensor , 2005 .

[4]  H.A. Toliyat,et al.  Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review , 2005, IEEE Transactions on Energy Conversion.

[5]  J. Bastos,et al.  Electromagnetic Modeling by Finite Element Methods , 2003 .

[6]  T.A. Lipo,et al.  Short-circuit fault mitigation methods for interior PM synchronous machine drives using six-leg inverters , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[7]  Thomas G. Habetler,et al.  Evaluation and implementation of a system to eliminate arbitrary load effects in current-based monitoring of induction machines , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[8]  Thomas A. Lipo,et al.  Bearing currents and shaft voltages of an induction motor under hard and soft switching inverter excitation , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[9]  R. S. Chokhawala,et al.  A discussion on IGBT short-circuit behavior and fault protection schemes , 1995 .

[10]  J.B. Bernstein,et al.  Failure dynamics of the IGBT during turn-off for unclamped inductive loading conditions , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[11]  T. Elch-Heb,et al.  Remedial strategy for inverter-induction machine system faults using two-phase operation , 2002 .

[12]  T.G. Habetler,et al.  A Survey of Methods for Detection of Stator-Related Faults in Induction Machines , 2007, IEEE Transactions on Industry Applications.

[13]  M.L. Gasperi,et al.  Life prediction modeling of bus capacitors in AC variable-frequency drives , 2005, IEEE Transactions on Industry Applications.

[14]  F.C. Trutt,et al.  On-line condition monitoring of induction motors , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[15]  A.J. Marques Cardoso,et al.  Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[16]  J. W. McRae.  The Magnetic Vector Potential , 1936, Transactions of the American Institute of Electrical Engineers.

[17]  Babak Fahimi,et al.  Fault tolerant operation of induction motor drives with automatic controller reconfiguration , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[18]  R.J. Kerkman,et al.  PWM inverters producing torsional components in AC motors , 2008, 2008 55th IEEE Petroleum and Chemical Industry Technical Conference.

[19]  Anushree Anantharaman Kadaba,et al.  DESIGN AND MODELING OF A REVERSIBLE 3-PHASE TO 6-PHASE INDUCTION MOTOR FOR IMPROVED SURVIVABILITY UNDER FAULTY CONDITIONS , 2008 .

[20]  T. G. Habetler,et al.  A method for sensorless on-line vibration monitoring of induction machines , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[21]  Giovanni Franceschini,et al.  On-field experience with online diagnosis of large induction motors cage failures using MCSA , 2002 .

[22]  S.M. Silva,et al.  PLL structures for utility connected systems , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[23]  Ayman M. EL-Refaie,et al.  Fault-tolerant PM machines: A review , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[24]  M.J. Melfi,et al.  Bearing current remediation options , 2004, IEEE Industry Applications Magazine.

[25]  D. Schlegel,et al.  Reflected wave modeling techniques for PWM AC motor drives , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[26]  F. Filippetti,et al.  Closed loop control impact on the diagnosis of induction motors faults , 1999 .

[27]  Bimal K. Bose,et al.  Modern Power Electronics and AC Drives , 2001 .

[28]  A. H. Bonnett,et al.  Motor bearing systems , 2002 .

[29]  Hamid A. Toliyat,et al.  Novel frequency-domain-based technique to detect stator interturn faults in induction machines using stator-induced voltages after switch-off , 2002 .

[30]  Peter Vas,et al.  Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines , 1993 .

[31]  Youngkook Lee,et al.  A Stator Turn Fault Detection Method and a Fault-Tolerant Operating Strategy for Interior PM Synchronous Motor Drives in Safety-Critical Applications , 2007 .

[32]  Frede Blaabjerg,et al.  Experimental evaluation of ride-through capabilities for a matrix converter under short power interruptions , 2002, IEEE Trans. Ind. Electron..

[33]  M. Haji,et al.  Pattern Recognition-A Technique for Induction Machines Rotor Broken Bar Detection , 2001, IEEE Power Engineering Review.

[34]  K. Iwan,et al.  Conducted EMI Propagation In Inverter-fed AC Motor , 2006 .

[35]  A. H. Bonnett,et al.  A comparison between insulation systems available for PWM inverter fed motors , 1996, Proceedings of 1996 IAS Petroleum and Chemical Industry Technical Conference.

[36]  R. M. Tallam,et al.  A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix , 2003 .

[37]  Bimal K. Bose,et al.  Power Electronics and Ac Drives , 1986 .

[38]  Fiorenzo Filippetti,et al.  Recent developments of induction motor drives fault diagnosis using AI techniques , 2000, IEEE Trans. Ind. Electron..

[39]  D. Bradley.  CHAPTER 3 – MODE OF OPERATION , 1965 .

[40]  Thomas A. Lipo,et al.  Pulse Width Modulation for Power Converters: Principles and Practice , 2003 .

[41]  J. Klima.  Analytical Investigation of Influence of DC-Link Voltage Ripple on PWM VSI Fed Induction Motor Drive , 2006, 2006 1ST IEEE Conference on Industrial Electronics and Applications.

[42]  R. Bartnikas,et al.  Multi-stress aging of stator bars with electrical, thermal, and mechanical stresses as simultaneous acceleration factors , 2004, IEEE Transactions on Energy Conversion.

[43]  Nabeel A. O. Demerdash,et al.  Comparison between characterization and diagnosis of broken bars/end-ring connectors and airgap eccentricities of induction motors in ASDs using a coupled finite element-state space method , 2000 .

[44]  T.A. Lipo,et al.  A strategy for improving reliability of field oriented controlled induction motor drives , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[45]  N. Ertugrul,et al.  Fault tolerant motor drive system with redundancy for critical applications , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[46]  Russel J. Kerkman,et al.  EMI emissions of modern PWM AC drives , 1999 .

[47]  Charles R. Sullivan,et al.  Stator-flux-based vector control of induction machines in magnetic saturation , 1995 .

[48]  John Fayia Bangura.  Diagnosis of normal and abnormal operations of induction motors in ASDs by a coupled finite element-network technique , 1999 .

[49]  Thomas G. Habetler,et al.  Stator winding turn-fault detection for closed-loop induction motor drives , 2002 .

[50]  Seung-Ki Sul,et al.  Maximum torque control of an induction machine in the field weakening region , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[51]  S. Williamson,et al.  Analysis of Cage Induction Motors with Stator Winding Faults , 1985, IEEE Power Engineering Review.

[52]  Bimal K. Bose,et al.  On-line search based pulsating torque compensation of a fault mode single phase variable frequency induction motor drive , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[53]  H.A. Toliyat,et al.  Short-Circuit Fault Mitigation in Six-Phase Induction Machine Drives , 2007, 2007 IEEE Vehicle Power and Propulsion Conference.

[54]  Nabeel A. O. Demerdash,et al.  Effects of broken bars/end-ring connectors and airgap eccentricities on ohmic and core losses of induction motors in ASDs using a coupled finite element-state space method , 2000 .

[55]  Paul C. Krause,et al.  Analysis of electric machinery , 1987 .

[56]  G. Bhuvaneswari,et al.  Power-quality improvements in vector-controlled induction motor drive employing pulse multiplication in AC-DC converters , 2006, IEEE Transactions on Power Delivery.

[57]  T.A. Lipo,et al.  Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations , 2003, IEEE Transactions on Power Electronics.

[58]  M. Riordan.  How Europe missed the transistor , 2005, IEEE Spectrum.

[59]  Gary L. Skibinski,et al.  Effect of surge voltage risetime on the insulation of low voltage machines fed by PWM converters , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[60]  David Leggate,et al.  Interaction of drive modulation and cable parameters on AC motor transients , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[61]  Gwen P. Gentile,et al.  Investigation of inverter-fed induction motors under fault conditions , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[62]  T. G. Habetler,et al.  Insulation failure prediction in AC machines using line-neutral voltages , 1998 .

[63]  S. Scheer,et al.  1. An overview , 1992 .

[64]  W. T. Thomson,et al.  Current signature analysis to detect induction motor faults , 2001 .

[65]  李幼升,et al.  Ph , 1989 .

[66]  Gui-Jia Su,et al.  Design of a PM Brushless Motor Drive for Hybrid Electrical Vehicle Application , 2000 .

[67]  D. Howe,et al.  Direct torque control of three-phase PM brushless AC motor with one phase open-circuit fault , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[68]  Horst Grotstollen,et al.  Torque capability and control of a saturated induction motor over a wide range of flux weakening , 1995, IEEE Trans. Ind. Electron..

[69]  Ludek Schreier,et al.  Control method for DC-link voltage ripple cancellation in voltage source inverter under unbalanced three-phase voltage supply conditions , 2005 .

[70]  Gian Carlo Montanari.  Aging and life models for insulation systems based on PD detection , 1995 .

[71]  Dong-Seok Hyun,et al.  Advanced Synchronous Reference Frame Controller for Three-phase UPS Powering Unbalanced and Nonlinear Loads , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[72]  Afroz M. Imam.  Condition Monitoring of Electrolytic Capacitors for Power Electronics Applications , 2007 .

[73]  Hossin Hosseinian,et al.  Power Electronics , 2020, 2020 27th International Conference on Mixed Design of Integrated Circuits and System (MIXDES).

[74]  Ion Boldea,et al.  The Induction Machine Handbook , 2001 .

[75]  叶萍,et al.  β , 2002 .

[76]  Guan-Chyun Hsieh,et al.  Phase-locked loop techniques. A survey , 1996, IEEE Trans. Ind. Electron..

[77]  C. H. Rojas,et al.  Study of an induction motor working under stator winding inter-turn short circuit condition , 2003, 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003..

[78]  P. Vas.  Vector control of AC machines , 1990 .

[79]  Thomas M. Jahns.  Improved reliability in solid-state drives for large asynchronous ac machines by means of multiple independent phase-drive units , 1978 .

[80]  S.E.M. de Oliveira.  Operation of three-phase induction motors connected to one-phase supply , 1990 .

[81]  Peter Vas,et al.  Electrical Machines and Drives: A Space-Vector Theory Approach , 1993 .

[82]  Weijun Yin,et al.  Failure mechanism of winding insulations in inverter-fed motors , 1997 .

[83]  G. Borner,et al.  Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controll , 1996 .

[84]  W. Brogan.  Modern Control Theory , 1971 .

[85]  P. Enjeti,et al.  A new technique to reject DC-link voltage ripple for inverters operating on programmed PWM waveforms , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[86]  D. Schlegel,et al.  AC drives: year 2000 (Y2K) and beyond , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).

[87]  M. Arkan,et al.  Induction motor fault detection by space vector angular fluctuation , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[88]  Kazuo Ikeda,et al.  High Performance IM Drive by Coordinate Control Using a Controlled Current Inverter , 1982, IEEE Transactions on Industry Applications.

[89]  K. Stockman,et al.  Torque behavior of a RFO induction motor drive under voltage sag conditions , 2002, 10th International Conference on Harmonics and Quality of Power. Proceedings (Cat. No.02EX630).

[90]  Philip T. Krein,et al.  Elements of Power Electronics , 1997 .

[91]  Bimal K. Bose,et al.  Investigation of fault modes of voltage-fed inverter system for induction motor drive , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[92]  G.E. Dawson,et al.  The detection of broken bars in the cage rotor of an induction machine , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[93]  Christian Kral,et al.  On-line rotor cage monitoring of inverter-fed induction machines by means of an improved method , 1999 .

[94]  C. Gerada,et al.  Operating induction motor drives with turn-to-turn faults , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[95]  Doyle F. Busse,et al.  Bearing currents and their relationship to PWM drives , 1997 .

[96]  F. Filippetti,et al.  Quantitative evaluation of induction motor broken bars by means of electrical signature analysis , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[97]  Qian Liu,et al.  Modular Approach for Characterizing and Modeling Conducted EMI Emissions in Power Converters , 2005 .

[98]  Gojko Joksimovic,et al.  The detection of inter-turn short circuits in the stator windings of operating motors , 2000, IEEE Trans. Ind. Electron..

[99]  R. H. Staunton,et al.  Stator Insulation Degradation Test Uses ASD Switching Frequency , 2002, IEEE Power Engineering Review.

[100]  Thomas A. Lipo,et al.  Disturbance free operation of a multiphase current regulated motor drive with an opened phase , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[101]  Bimal K. Bose,et al.  Fault mode single-phase operation of a variable frequency induction motor drive and improvement of pulsating torque characteristics , 1994, IEEE Trans. Ind. Electron..

[102]  D. Leggate,et al.  Reflected waves and their associated current , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[103]  H. G. Sedding,et al.  Current monitoring for detecting inter-turn short circuits in induction motors , 2001 .

[104]  Robert S. Alwitt,et al.  The Chemistry of Failure of Aluminum Electrolytic Capacitors , 1965 .

[105]  B. Mirafzal,et al.  On innovative methods of induction motor inter-turn and broken-bar fault diagnostics , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[106]  Greg Asher,et al.  Sensorless speed detection of inverter fed induction motors using rotor slot harmonics and fast Fourier transform , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[107]  G. Lefranc,et al.  Localisation of electrical-insulation- and partial-discharge failures of IGBT modules , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[108]  J. R. Laghari,et al.  Models for insulation aging under electrical and thermal multistress , 1990 .

[109]  Pragasen Pillay,et al.  Motor current signature analysis , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[110]  T.A. Lipo,et al.  Magnet flux nulling control of interior PM machine drives for improved response to short-circuit faults , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[111]  Alexander C. Smith,et al.  Steady-state analysis of 3-phase cage motors with rotor-bar and end-ring faults , 1982 .

[112]  J. Sottile,et al.  An on-line method to detect incipient failure of turn insulation in random-wound motors , 1993 .

[113]  Ayman M. El-Refaie,et al.  Comparison of Induction Machine Performance with Distributed and Fractional-Slot Concentrated Windings , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[114]  M. Chari,et al.  Finite elements in electrical and magnetic field problems , 1980 .

[115]  N. Meyers,et al.  H = W. , 1964, Proceedings of the National Academy of Sciences of the United States of America.

[116]  Hao Ma,et al.  Fault diagnosis and failure prediction of aluminum electrolytic capacitors in power electronic converters , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..