On improved confidence bounds for system reliability

In this paper, new bounding strategies are presented to improve confidence interval estimation for system reliability based on component level reliability, and associated uncertainty data. Research efforts have been focused on two interdependent areas: 1) development & improvement of analytical approaches for quantifying the uncertainty associated with the system reliability estimate when data regarding component reliability is available; and 2) based on these analytical approaches, generating statistical inference methods that can be used to make accurate estimations about the reliability of a system. The analytical approach presented relies on a recursive rationale that can be applied to obtain the variance associated with the system reliability estimate, provided the system can be decomposed into a series-parallel configuration. The bounding procedure is independent of parametric assumptions regarding component time to failure, and can be applied whenever component reliability data are available. To assess the validity of the proposed procedure, three test cases have been analyzed. For each case, Monte-Carlo simulation has been used to generate component failure data, based on nominal component reliability values. Based on these simulated data, lower bounds have been constructed, and then compared against nominal system reliability to generate an expected confidence level. The results obtained exhibit a significant improvement in the accuracy of the confidence intervals for the system reliability when compared with existing approximation methods. The procedure described is effective, relatively simple, and widely applicable.

[1]  Larry H. Crow,et al.  Confidence intervals on the reliability of repairable systems , 1993, Annual Reliability and Maintainability Symposium 1993 Proceedings.

[2]  Subba Rao V. Majety,et al.  Optimum combined test plans for systems and components , 1999 .

[3]  Nader B. Ebrahimi Indirect assessment of system reliability , 2003, IEEE Trans. Reliab..

[4]  Eric R. Ziegel,et al.  Engineering Statistics , 2004, Technometrics.

[5]  Tongdan Jin,et al.  TEST PLAN ALLOCATION TO MINIMIZE SYSTEM RELIABILITY ESTIMATION VARIABILITY , 2004 .

[6]  Tongdan Jin,et al.  Prioritizing system-reliability prediction improvements , 2001, IEEE Trans. Reliab..

[7]  Jayant Rajgopal,et al.  Designing Component Test Plans for Series System Reliability via Mathematical Programming , 1995 .

[8]  Tongdan Jin,et al.  Variance of system-reliability estimates with arbitrarily repeated components , 2001, IEEE Trans. Reliab..

[9]  Huei-Yaw Ke Sampling plans for vehicle component reliability verification , 1999 .

[10]  Mohamed A. Abdou,et al.  Application of reliability analysis method to fusion component testing , 1995 .

[11]  P. Lutz The testing and assembly system design: process to select assembly plans according to a testing strategy , 1999, Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning (ISATP'99) (Cat. No.99TH8470).

[12]  Edward R Sherwin Analysis of One Shot Devices , 2000 .

[13]  Pauline Coolen-Schrijner,et al.  Nonparametric predictive inference in reliability , 2002, Reliab. Eng. Syst. Saf..

[14]  L. A. Goodman On the Exact Variance of Products , 1960 .

[15]  M. Mazumdar,et al.  On the design of component test plans based on system reliability objectives , 1991, Annual Reliability and Maintainability Symposium. 1991 Proceedings.

[16]  D. Das,et al.  A review of reliability prediction methods for electronic devices , 2002, Microelectron. Reliab..

[17]  Jayant Rajgopal,et al.  A system-based component test plan for a series system, with type-II censoring , 1996, IEEE Trans. Reliab..

[18]  Jayant Rajgopal,et al.  Minimum cost component test plans for evaluating reliability of a highly reliable parallel system , 1997 .

[19]  Albert H. Moore,et al.  Series-system reliability-estimation using very small binomial samples , 1997 .

[20]  Rene L. Bierbaum,et al.  Nuclear Weapon Reliability Evaluation Methodology , 2002 .

[21]  J. Nachlas,et al.  Diagnostic-strategy selection for series systems , 1990 .

[22]  Jayant Rajgopal,et al.  DESIGNING COMPONENT TEST PLANS FOR SYSTEM RELIABILITY VIA MATHEMATICAL PROGRAMMING , 1995 .

[23]  D. Coit System-reliability confidence-intervals for complex-systems with estimated component-reliability , 1997 .