The effects of corrugation pitch on the condensation heat transfer coefficient and pressure drop of R-134a inside horizontal corrugated tube

Abstract The heat transfer coefficient and pressure drop of R-134a inside a horizontal smooth tube and corrugated tubes are experimentally investigated. The test section is a 2.0 m long counter-flow concentric double tube heat exchanger with refrigerant flowing in the inner tube and cooling water flowing in the annulus. A smooth tube and corrugated tubes having inner diameters of 8.7 mm are used as an inner tube. The corrugation pitches are 5.08, 6.35, and 8.46 mm, respectively. The corrugation depth of all corrugated tubes is fixed at 1.5 mm. The outer tube is made from smooth copper tube having an inner diameter of 21.2 mm. The test runs are performed at the saturation temperatures of 40, 45, and 50 °C, heat fluxes of 5 and 10 kW/m 2 , and mass fluxes ranging from 200 to 700 kg/m 2  s. The results obtained from the corrugated tubes are compared with that of the smooth tube. It is found that the corrugation pitches have a significant effect on the heat transfer coefficient and pressure drop augmentations.

[1]  V. Zimparov,et al.  Enhancement of heat transfer by a combination of three-start spirally corrugated tubes with a twisted tape , 2001 .

[2]  R. D. Jackson,et al.  Heat Transfer 1 , 1965 .

[3]  Paisarn Naphon,et al.  Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib , 2006 .

[4]  J. Chato,et al.  Condensation in Smooth Horizontal Tubes , 1998 .

[5]  J. Cieśliński,et al.  Evaporation of R407C/oil mixtures inside corrugated and micro-fin tubes , 2007 .

[6]  Pradeep Bansal,et al.  In-tube condensation of mixture of R134a and ester oil: empirical correlations. , 2003 .

[7]  Huixiong Li,et al.  Pressure drop, heat transfer and performance of single-phase turbulent flow in spirally corrugated tubes , 2001 .

[8]  Ventsislav D. Zimparov,et al.  Enhancement of heat transfer by a combination of a single-start spirally corrugated tubes with a twisted tape , 2002 .

[9]  J. Chung,et al.  Evaporation heat transfer characteristics of R-410A in 7 and 9.52 mm smooth/micro-fin tubes , 2002 .

[10]  S. Zivi.  Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production , 1964 .

[11]  S. Haaland.  Simple and Explicit Formulas for the Friction Factor in Turbulent Pipe Flow , 1983 .

[12]  Marco Spiga,et al.  HEAT TRANSFER ENHANCEMENT IN A CORRUGATED TUBE , 2002 .

[13]  C. L. Tien,et al.  GENERAL FILM CONDENSATION CORRELATIONS , 1987 .

[14]  Chi-Chuan Wang,et al.  In-tube evaporation of HCFC-22 in a 9.52 mm micro-fin/smooth tube , 1996 .

[15]  Sara Rainieri,et al.  Convective heat transfer to temperature dependent property fluids in the entry region of corrugated tubes , 2002 .

[16]  P. G. Vicente,et al.  Experimental investigation on heat transfer and frictional characteristics of spirally corrugated tubes in turbulent flow at different Prandtl numbers , 2004 .

[17]  Michael B. Pate,et al.  Evaporation and condensation heat transfer and pressure drop in horizontal, 12.7-mm microfin tubes with refrigerant 22 , 1990 .

[18]  V. Zimparov,et al.  Prediction of friction factors and heat transfer coefficients for turbulent flow in corrugated tubes combined with twisted tape inserts. Part 1: friction factors , 2004 .

[19]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[20]  A. Bejan,et al.  Heat transfer handbook , 2003 .

[21]  Kadir Bilen,et al.  The investigation of groove geometry effect on heat transfer for internally grooved tubes , 2009 .

[22]  R. Lockhart.  Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes , 1949 .

[23]  S. Wongwises,et al.  Two-phase condensation heat transfer coefficients of HFC –134a at high mass flux in smooth and micro-fin tubes , 2003 .

[24]  P. G. Vicente,et al.  MIXED CONVECTION HEAT TRANSFER AND ISOTHERMAL PRESSURE DROP IN CORRUGATED TUBES FOR LAMINAR AND TRANSITION FLOW , 2004 .

[25]  D. Chisholm,et al.  Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels , 1973 .

[26]  V. Zimparov.  Prediction of friction factors and heat transfer coefficients for turbulent flow in corrugated tubes combined with twisted tape inserts. Part 2: heat transfer coefficients , 2004 .