Could electric motor in HEV assist vehicle launch and relief dry clutch from thermal damage?

The Hybrid Electric Vehicles (HVEs) are reaching a wide diffusion both because the energy density and life of batteries increased in the last years with a decrease of their costs and because the reduction of air pollution is a very important issue, especially in big cities. This latter is one, or probably the main, reason that pushes the development of HEVs and electric vehicles (EVs).

[1]  Mario Pisaturo,et al.  Simulation of engagement control in automotive dry-clutch and temperature field analysis through finite element model , 2016 .

[2]  Enrico Sciubba,et al.  A real time energy management strategy for plug-in hybrid electric vehicles based on optimal control theory , 2014 .

[3]  Maurizio Cirrincione,et al.  Multiple Constrained MPC Design for Automotive Dry Clutch Engagement , 2015, IEEE/ASME Transactions on Mechatronics.

[4]  Paul D. Walker,et al.  Active damping of transient vibration in dual clutch transmission equipped powertrains: A comparison of conventional and hybrid electric vehicles , 2014 .

[5]  T. P. Newcomb Temperatures Reached in Friction Clutch Transmissions , 1960 .

[6]  C. C. Chan,et al.  The State of the Art of Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[7]  T. P. Newcomb Calculation of Surface Temperatures Reached in Clutches when the Torque Varies with Time , 1961 .

[8]  Maurizio Cirrincione,et al.  Influence of the temperature on the dry-clutch engagement control in gear-shift manoeuvres , 2015, 2015 23rd Mediterranean Conference on Control and Automation (MED).

[9]  Mario Pisaturo,et al.  Modelling the cushion spring characteristic to enhance the automated dry-clutch performance: The temperature effect , 2012 .

[10]  L. Glielmo,et al.  Gearshift control for automated manual transmissions , 2006, IEEE/ASME Transactions on Mechatronics.

[11]  F Vasca,et al.  Torque Transmissibility Assessment for Automotive Dry-Clutch Engagement , 2011, IEEE/ASME Transactions on Mechatronics.

[12]  Mazen Alamir,et al.  Experimental evaluation of a hybrid MPC strategy for vehicle start-up with an Automated Manual Transmission , 2009, 2009 European Control Conference (ECC).

[13]  Josef Schlattmann,et al.  Thermal behavior of friction clutch disc based on uniform pressure and uniform wear assumptions , 2016 .

[14]  Farzad Samie,et al.  Dry Dual Clutch Transmission (DCT) Thermal Model , 2015 .

[15]  Mario Pisaturo,et al.  Automotive dry-clutch control: Engagement tracking and FE thermal model , 2016, 2016 IEEE 20th Jubilee International Conference on Intelligent Engineering Systems (INES).

[16]  Li Lei,et al.  Research on Rapid Testing Platform for TCU of Automated Manual Transmission , 2011, 2011 Third International Conference on Measuring Technology and Mechatronics Automation.

[17]  R. Beck,et al.  Model Predictive Control of a Parallel Hybrid Vehicle Drivetrain , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[18]  Francesco Vasca,et al.  Dry Dual Clutch Torque Model with Temperature and Slip Speed Effects , 2016 .

[19]  Mario Pisaturo,et al.  FRICTIONAL BEHAVIOUR AND ENGAGEMENT CONTROL IN DRY CLUTCH BASED AUTOMOTIVE TRANSMISSIONS , 2017 .

[20]  Josef Schlattmann,et al.  Finite Element Analysis of Temperature Field in Automotive Dry Friction Clutch , 2012 .

[21]  Seibum B. Choi,et al.  Real-Time Estimation of Transmitted Torque on Each Clutch for Ground Vehicles With Dual Clutch Transmission , 2015, IEEE/ASME Transactions on Mechatronics.

[22]  Xiaosong Hu,et al.  Modeling and control strategy development of a parallel hybrid electric bus , 2013 .

[23]  Li Chen,et al.  Torque Coordination Control During Mode Transition for a Series–Parallel Hybrid Electric Vehicle , 2012, IEEE Transactions on Vehicular Technology.

[24]  Yimin Mo,et al.  Study on Heat Fading of Phenolic Resin Friction Material for Micro-automobile Clutch , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[25]  Lars Eriksson,et al.  Modeling, Observability, and Estimation of Thermal Effects and Aging on Transmitted Torque in a Heavy Duty Truck With a Dry Clutch , 2015, IEEE/ASME Transactions on Mechatronics.

[26]  Francesco Vasca,et al.  Software in the loop model and decoupling control for dual clutch automotive transmissions , 2013, 3rd International Conference on Systems and Control.

[27]  T. P. Newcomb,et al.  TEMPERATURE DISTRIBUTIONS IN AUTOMOTIVE DRY CLUTCHES , 1976 .

[28]  Hong Chen,et al.  Thermal-friction modeling and analysis for automotive dry clutch systems , 2016, 2016 35th Chinese Control Conference (CCC).

[29]  Mazen Alamir,et al.  Unified MPC strategy for idle-speed control, vehicle start-up and gearing applied to an Automated Manual Transmission , 2008 .

[30]  Pierluigi Pisu,et al.  A Comparative Study Of Supervisory Control Strategies for Hybrid Electric Vehicles , 2007, IEEE Transactions on Control Systems Technology.

[31]  Hyeongcheol Lee,et al.  Mode Transition Control Using Disturbance Compensation for a Parallel Hybrid Electric Vehicle , 2011 .

[32]  Sam Akehurst,et al.  Stochastic Dynamic Programming in the Real-World Control of Hybrid Electric Vehicles , 2016, IEEE Transactions on Control Systems Technology.

[33]  Lars Eriksson,et al.  The Effect of Thermal Expansion in a Dry Clutch on Launch Control , 2013 .

[34]  Jian Wang,et al.  Hybrid electric vehicle modeling accuracy verification and global optimal control algorithm research , 2015 .

[35]  Hao Liu,et al.  A Study on Thermal Analytical Model for a Dry Dual Clutch , 2015 .

[36]  Hyun-Soo Kim,et al.  Optimization of control strategy for a single-shaft parallel hybrid electric vehicle , 2007 .

[37]  Adolfo Senatore,et al.  Improving the engagement performance of automated dry clutch through the analysis of the influence of the main parameters on the frictional map , 2013 .

[38]  Hong Chen,et al.  Friction coefficient identification of dry clutch in automated manual transmissions , 2014, 2014 International Conference on Mechatronics and Control (ICMC).