Ring-Shaped Sensitive Element Design for Acceleration Measurements: Overcoming the Limitations of Angular-Shaped Sensors

A new modification of an acceleration measurement sensor based on an acoustic waves resonance principle is proposed. Common angular-shaped sensors exhibit stress concentrations at the angular points near the origin points of destruction under external stresses; these points are the “Achilles’ heel” of the entire design. To overcome the above limitation, we suggest an angular-free ring-shaped sensitive element design that is characterized by enhanced robustness against external stress. The analytical treatment is validated by computer simulation results performed using the COMSOL Multiphysics software package. For an appropriate model parameterization, an original experiment has been carried out to estimate the stress-strained robustness of two potential candidates for sensitive console materials. Moreover, characteristics of the proposed sensor design, such as sensitivity threshold and maximum stress, have been obtained from the simulation data. The above results indicate that the proposed concept offers a promising advancement in surface acoustic waves (SAW) based accelerometer devices, and could, therefore, be used for several practical applications in such areas as biomedical and sports wearable devices; vehicular design, including unmanned solutions; and industrial robotics, especially those where high-G forces are expected.

[1]  Pinghua Tang,et al.  A noise-robust method for passive wireless resonant SAW sensor , 2016 .

[2]  Luis Nero Alves,et al.  Measuring Torque and Temperature in a Rotating Shaft Using Commercial SAW Sensors , 2017, Sensors.

[3]  Wen Wang,et al.  Surface acoustic wave acceleration sensor with high sensitivity incorporating ST-X quartz cantilever beam , 2014 .

[4]  Yang Yang,et al.  Recent research results on wireless passive acoustic sensors for smart grids application , 2016, 2016 IEEE International Ultrasonics Symposium (IUS).

[5]  C. Myers,et al.  Strap-down microelectromechanical (MEMS) sensors for high-g munition applications , 2001 .

[6]  S. Dong,et al.  Discrete microfluidics based on aluminum nitride surface acoustic wave devices , 2015 .

[7]  Lars Hoff,et al.  Assembly and packaging of a three-axis micro accelerometer used for detection of heart infarction , 2007, Biomedical microdevices.

[9]  William C. Wilson,et al.  Surface acoustic wave vibration sensors for measuring aircraft flutter , 2016, 2016 IEEE International Conference on Prognostics and Health Management (ICPHM).

[10]  Amira S. Ashour,et al.  Acoustic Sensors for Biomedical Applications , 2018 .

[11]  D. Safronov,et al.  Microaccelerometer based on surface acoustic waves , 2014, Proceedings of the 2014 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications.

[12]  Sergey Shevchenko,et al.  Micromechanical accelerometers based on surface acoustic waves , 2014, 2014 NORCHIP.

[13]  G. Konstantinidis,et al.  GaN/Si based single SAW resonator temperature sensor operating in the GHz frequency range , 2014 .

[14]  B. Ben Moshe,et al.  Indoor positioning and navigation for micro UAV drones — Work in progress , 2012, 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel.

[15]  Hongli Qi,et al.  A surface acoustic wave response detection method for passive wireless torque sensor , 2018 .

[16]  K. J. Miller,et al.  A Theory for Fatigue Failure under Multiaxial Stress-Strain Conditions , 1973 .

[17]  Sergey Shevchenko,et al.  Surface-Acoustic-Wave Sensor Design for Acceleration Measurement , 2018, Sensors.

[18]  Shitang He,et al.  A New Micro-rate Sensor Based on Shear Horizontal Surface Acoustic Wave Gyroscopic Effect , 2010 .

[19]  Yan Wang,et al.  Quasi-Static Calibration Method of a High-g Accelerometer , 2017, Sensors.

[20]  Shih-Chia Chang,et al.  MEMS in Automobiles , 2012 .