论文信息 - Validation of 5G METIS map-based channel model at mmwave bands in indoor scenarios

Validation of 5G METIS map-based channel model at mmwave bands in indoor scenarios

Valid channel models for the future generation of communications (5G) are paramount for system design and performance analysis. The METIS map-based model is based on 3D ray tracing principles with a simplified description of the environment and it is suitable for 5G communications. In this paper, the model is first described and then validated through comparison with indoor measurements performed at mmwave frequencies. Specifically, the dominant paths trajectory and power values are compared for three relevant scenarios: line of sight (LOS), non-line of sight (NLOS) and obstructed line of sight (O-LOS), where an object blocks the LOS path. Agreement between simulations and measurements is remarkable.

[1] C. J. Ball. An introduction to the theory of diffraction , 1971 .

[2] Rodney G. Vaughan,et al. Channels, Propagation and Antennas for Mobile Communications , 2003 .

[3] K. Borner,et al. Channel modelling for the fifth generation mobile communications , 2014, The 8th European Conference on Antennas and Propagation (EuCAP 2014).

[4] T. Rappaport,et al. A comparison of theoretical and empirical reflection coefficients for typical exterior wall surfaces in a mobile radio environment , 1996 .

[5] J.-E. Berg,et al. A recursive method for street microcell path loss calculations , 1995, Proceedings of 6th International Symposium on Personal, Indoor and Mobile Radio Communications.

[6] H. Bertoni,et al. A theoretical model of UHF propagation in urban environments , 1988 .