Stress Analysis of Coated Particle Fuel in Graphite of High-Temperature Reactors

Abstract The PArticle STress Analysis (PASTA) code was written to evaluate stresses in coated particle fuel embedded in graphite of high-temperature reactors (HTRs). Existing models for predicting stresses in coated particle fuels were extended with a treatment of stresses induced by dimensional change of the matrix graphite and stresses caused by neighboring particles. PASTA was applied to two practical cases in order to evaluate the significance of this model extension. Thermal hydraulics, neutronics, and fuel depletion calculation tools were used to calculate the fuel conditions in these cases. Stresses in the first fuel loading of the High-Temperature Engineering Test Reactor (HTTR) and in the fuel of a 400-MW(thermal) pebble bed reactor were analyzed. It is found that the presence of the matrix material plays a significant role in the determination of the stresses that apply to a single isolated TRISO particle as well as in the transmittal of the stresses between particles in actual pebble designs.

[1]  Tatsuo Oku,et al.  Irradiation creep properties and strength of a fine-grained isotropic graphite , 1990 .

[2]  Hans D. Gougar,et al.  Investigation of bounds on particle packing in pebble-bed high temperature reactors , 2006 .

[3]  R. Ballinger,et al.  TIMCOAT: An Integrated Fuel Performance Model for Coated Particle Fuel , 2004 .

[4]  J. W. Prados,et al.  MATHEMATICAL MODEL FOR PREDICTING COATED-PARTICLE BEHAVIOR. , 1965 .

[5]  Donald R. Olander,et al.  Fundamental aspects of nuclear reactor fuel elements : prepared for the Division of Reactor Development and Demonstration, Energy Research and Development Administration , 1976 .

[6]  D. Petti,et al.  Updated solution for stresses and displacements in TRISO-coated fuel particles , 2008 .

[7]  Shusaku Shiozawa,et al.  Development of a Coated Fuel Particle Failure Model under High Burnup Irradiation , 1996 .

[8]  Charles F. Bonilla,et al.  Fundamental Aspects of Nuclear Reactor Fuel Elements , 1978 .

[9]  Kostadin Ivanov,et al.  Summary of comparison and analysis of results from exercises 1 and 2 of the OECD PBMR coupled neutronics/thermal hydraulics transient benchmark , 2006 .

[10]  G. Miller.  STRESSES IN A SPHERICAL PRESSURE VESSEL UNDERGOING CREEP AND DIMENSIONAL CHANGES , 1995 .

[11]  K. Verfondern,et al.  Irradiation performance and modeling of HTR-10 coated fuel particles , 2006 .

[12]  Gregory K. Miller,et al.  Analytical solution for stresses in TRISO-coated particles , 1993 .

[13]  J. Smith,et al.  Introduction to chemical engineering thermodynamics , 1949 .

[14]  T. Liang,et al.  A review of TRISO-coated particle nuclear fuel performance models , 2006 .

[15]  G. Miller.  Considerations of Irradiation-Induced Transient Creep in Fuel Particle Modeling , 1995 .

[16]  Jan Leen Kloosterman,et al.  Analytical Calculation of the Average Dancoff Factor for a Fuel Kernel in a Pebble Bed High-Temperature Reactor , 1999 .

[17]  A. Buerkholz.  IRRADIATION DAMAGE IN GRAPHITE , 1966 .

[18]  K. Gerstle.  Advanced Mechanics of Materials , 2001 .

[19]  Heinz Nabielek,et al.  Production of carbon monoxide during burn-up of UO2 kerneled HTR fuel particles , 1982 .

[20]  Gregory K. Miller,et al.  Consideration of the effects on fuel particle behavior from shrinkage cracks in the inner pyrocarbon layer , 2001 .

[21]  Donald R. Olander,et al.  Fundamental Aspects of Nuclear Reactor Fuel Elements , 1976 .

[22]  J. Gittus,et al.  IRRADIATION DAMAGE IN GRAPHITE. , 1972 .

[23]  Masahiro Ishihara,et al.  Lifetime evaluation of graphite components for HTGRs , 2004 .