Excellent adhesion of protective α-Al2O3 layer formed on ODS FeCrAl alloys

[1]  Teruya Tanaka,et al.  Reduction of MHD pressure drop by electrical insulating oxide layers in liquid breeder blanket of fusion reactors , 2023, Nuclear Materials and Energy.

[2]  P. Song,et al.  Alumina grain growth and grain boundary segregation of FeCrAl-based oxide dispersion-strengthened alloys at high temperature , 2022, Corrosion Science.

[3]  Teruya Tanaka,et al.  Corrosion mechanism of reduced activation ferritic martensitic steel JLF-1 in liquid metal Sn , 2022, Corrosion Science.

[4]  M. Kondo,et al.  Self-Healing Behavior of Oxide Layer in Liquid Metal , 2022, Plasma and Fusion Research.

[5]  X. Gong,et al.  fEnvironmental degradation of structural materials in liquid lead- and lead-bismuth eutectic-cooled reactors , 2022, Progress in Materials Science.

[6]  A. Kimura,et al.  Development of accident tolerant FeCrAl-ODS fuel cladding for BWRs in Japan , 2021 .

[7]  S. Kondo,et al.  Radiation tolerance of alumina scale formed on FeCrAl ODS ferritic steel , 2021, Nuclear Materials and Energy.

[8]  T. Nozawa,et al.  Corrosion-resistant materials for liquid LiPb fusion blanket in elevated temperature operation , 2021, Corrosion Science.

[9]  Kangli Wang,et al.  Influence of Si addition on the corrosion behavior of 9 wt% Cr ferritic/martensitic steels exposed to oxygen-controlled molten Pb-Bi eutectic at 550 and 600 °C , 2021, Corrosion Science.

[10]  S. Ukai,et al.  Effects of Thermal Aging on the Mechanical Properties of FeCrAl-ODS Alloy Claddings , 2021, MATERIALS TRANSACTIONS.

[11]  B. Pint,et al.  Pre-Oxidation to Improve Liquid Metal Compatibility , 2021, Oxidation of Metals.

[12]  Donghai Xu,et al.  Corrosion of FeCrAl alloys used as fuel cladding in nuclear reactors , 2021, Journal of Alloys and Compounds.

[13]  H. Asoh,et al.  Effects of nanoporous structure of anodic films on adhesive strength between aluminum alloys and polyamide resin , 2021, Journal of Japan Institute of Light Metals.

[14]  S. Schlabach,et al.  The influence of Y and Nb addition on the corrosion resistance of Fe-Cr-Al-Ni model alloys exposed to oxygen-containing molten Pb , 2021, Corrosion Science.

[15]  S. Kondo,et al.  Development of nano-oxide particles dispersed alumina scale formed on Zr-added FeCrAl ODS ferritic alloys , 2020 .

[16]  Q. Gong,et al.  Characteristics of oxide pegs in Ti- and Y-doped CoNiCrAl alloys at 1150 °C , 2020, Rare Metals.

[17]  S. Ukai,et al.  High-temperature creep deformation in FeCrAl-oxide dispersion strengthened alloy cladding , 2020, Materials Science and Engineering: A.

[18]  I. Panas,et al.  Reactive Element Effects in High-Temperature Alloys Disentangled , 2019, Oxidation of Metals.

[19]  T. Muroga,et al.  Corrosion resistance of Al-rich steel and Al2O3 ceramic bulk in liquid Sn , 2019, Fusion Engineering and Design.

[20]  S. Hayashi,et al.  Effects of zirconium and oxygen on the oxidation of FeCrAl-ODS alloys under air and steam conditions up to 1500 °C , 2019, Journal of Nuclear Materials.

[21]  H. Seifert,et al.  Influence of composition and heating schedules on compatibility of FeCrAl alloys with high-temperature steam , 2018, Journal of Nuclear Materials.

[22]  T. Muroga,et al.  Microstructure and peeling behavior of MOCVD processed oxide insulator coating before and after ion beam irradiation , 2018, Nuclear Materials and Energy.

[23]  J. Svensson,et al.  Interplay of water and reactive elements in oxidation of alumina-forming alloys , 2018, Nature Materials.

[24]  A. Jyothirmayi,et al.  Influence of microstructure on the wear and corrosion behavior of detonation sprayed Cr2O3-Al2O3 and plasma sprayed Cr2O3 coatings , 2018 .

[25]  S. Hayashi,et al.  The Transition from Transient Oxide to Protective Al2O3 Scale on Fe–Cr–Al Alloys During Heating to 1000 °C , 2018, Oxidation of Metals.

[26]  A. Kimura,et al.  Growth of oxide particles in FeCrAl- oxide dispersion strengthened steels at high temperature , 2017 .

[27]  K. Unocic,et al.  Compatibility of an FeCrAl alloy with flowing Pb-Li in a thermal convection loop ☆ , 2017 .

[28]  J. J. Yang,et al.  Preparation and characterization of Al2O3 coating by MOD method on CLF-1 RAFM steel , 2017 .

[29]  Kurt A. Terrani,et al.  Uniform corrosion of FeCrAl alloys in LWR coolant environments , 2016 .

[30]  S. Hayashi,et al.  Investigation of Initial Transient Oxidation of Fe–xCr–6at.%Al Alloys Using Synchrotron Radiation During Heating to 1000 °C in Air , 2016, Oxidation of Metals.

[31]  R. Jayaganthan,et al.  Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature , 2015 .

[32]  Bobji,et al.  Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces , 2014 .

[33]  R. Raman,et al.  Role of Nanostructure in Electrochemical Corrosion and High Temperature Oxidation: A Review , 2014, Metallurgical and Materials Transactions A.

[34]  T. Chikyow,et al.  Novel method for the prediction of an interface bonding species at alumina/metal interfaces , 2014 .

[35]  A. Sagara,et al.  Evaluation of Adhesion Strength of Er2O3 Coating Layer for an Advanced Breeding Blanket System Applied to Thermal Cycles using Nano-Scratch Method , 2014 .

[36]  M. Golozar,et al.  The effect of repeated repair welding on mechanical and corrosion properties of stainless steel 316L , 2014 .

[37]  Seiji Katayama,et al.  Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel , 2013 .

[38]  M. Yoshitake.  Prediction of Influence of Oxygen in Annealing Atmosphere on Surface Segregation Behavior in Layered Materials , 2012 .

[39]  M. Matsuda,et al.  Enhanced tissue penetration-induced high bonding strength of a novel tissue adhesive composed of cholesteryl group-modified gelatin and disuccinimidyl tartarate. , 2012, Colloids and surfaces. B, Biointerfaces.

[40]  Bruce A Pint,et al.  Progress in the development of insulator coating for liquid lithium blankets , 2010 .

[41]  J. Kollár,et al.  High temperature oxidation of Fe-Al and Fe-Cr-Al alloys: The role of Cr as a chemically active element , 2010 .

[42]  M. Spiegel,et al.  A comparison of the oxidation behaviours of Al2O3 formers and Cr2O3 formers at 700 °C - Oxide solid solutions acting as a template for nucleation , 2008 .

[43]  K. More,et al.  Transformation of Al2O3 to LiAlO2 in Pb–17Li at 800 °C , 2008 .

[44]  T. R. Allen,et al.  Lead-Cooled Fast Reactor Systems and the Fuels and Materials Challenges , 2007 .

[45]  Junho Choi,et al.  Micro-scratch test of DLC films on Si substrates prepared by bipolar-type plasma based ion implantation , 2007 .

[46]  Minoru Takahashi,et al.  Corrosion resistance of Si- and Al-rich steels in flowing lead–bismuth , 2006 .

[47]  Y. Niu,et al.  Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys , 2006 .

[48]  R. Baney,et al.  The effect of Zircaloy-4 substrate surface condition on the adhesion strength and corrosion of SiC coatings , 2005 .

[49]  H. Sekimoto,et al.  Metallurgical study on erosion and corrosion behaviors of steels exposed to liquid lead bismuth flow , 2005 .

[50]  Shigeru Yamauchi,et al.  Thermodynamic database MALT for Windows with gem and CHD , 2002 .

[51]  Z. Luo,et al.  Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy , 2002 .

[52]  K. Yoshihara,et al.  General rule for predicting surface segregation of substrate metal on film surface , 2001 .

[53]  Claudio Francesco Badini,et al.  Oxidation of FeCrAl alloy: influence of temperature and atmosphere on scale growth rate and mechanism , 2001 .

[54]  Wei Gao,et al.  Pilling-Bedworth ratio for oxidation of alloys , 2000 .

[55]  H. Schaefer,et al.  OXYGEN DIFFUSION IN ULTRAFINE GRAINED MONOCLINIC ZRO2 , 1999 .

[56]  L. Martinu,et al.  Micro-scratch analysis and mechanical properties of plasma-deposited silicon-based coatings on polymer substrates , 1999 .

[57]  C. Monty,et al.  Self-diffusion in α[sbnd]Al2O. IV. Oxygen grain-boundary self-diffusion in undoped and yttria-doped alumina polycrystals , 1996 .

[58]  K. Kitazawa,et al.  Oxygen self-diffusion in single-crystal Y2O3. , 1983 .

[59]  D. Whittle,et al.  Microstructure, adhesion and growth kinetics of protective scales on metals and alloys , 1982 .

[60]  F. Stott,et al.  THE ISOTHERMAL OXIDATION BEHAVIOR OF FE-CR-AL AND FE-CR-AL-Y ALLOYS AT 1200°C , 1980 .

[61]  F. Stott,et al.  The influence of yttrium additions on the oxide-scale adhesion to an iron-chromium-aluminum alloy , 1976 .

[62]  R. Jacobsson,et al.  Measurement of the adhesion of thin films , 1976 .

[63]  M. Kharaziha,et al.  Embedding CuO Nanoparticles in PDMS-SiO2 Coating to Improve Antibacterial Characteristic and Corrosion Resistance , 2019, Colloid and Interface Science Communications.

[64]  M. Nakao,et al.  Anchoring and chemical-bonding effects of anodic alumina microstructure on adhesion strength , 2018 .

[65]  F. Marinello,et al.  Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding , 2011 .

[66]  L. Hobbs,et al.  The reactive element effect in commercial ODS FeCrAI alloys , 1995 .

[67]  Michel A. Aegerter,et al.  Corrosion resistant sol-gel ZrO2 coatings on stainless steel , 1992 .

[68]  C. Wagner.  Beitrag zur Theorie des Anlaufvorgangs , 1933 .