Stability and Robustness Analysis of Plug-Pulling using an Aerial Manipulator

In this paper, an autonomous aerial manipulation task of pulling a plug out of an electric socket is conducted, where maintaining the stability and robustness is challenging due to sudden disappearance of a large interaction force. The abrupt change in the dynamical model before and after the separation of the plug can cause destabilization or mission failure. To accomplish aerial plug-pulling, we employ the concept of hybrid automata to divide the task into three operative modes, i.e, wire-pulling, stabilizing, and free-flight. Also, a strategy for trajectory generation and a design of disturbance-observer-based controllers for each operative mode are presented. Furthermore, the theory of hybrid automata is used to prove the stability and robustness during the mode transition. We validate the proposed trajectory generation and control method by an actual wire-pulling experiment with a multirotor-based aerial manipulator.

[1]  Xin Ma,et al.  Inspection-on-the-fly using Hybrid Physical Interaction Control for Aerial Manipulators , 2020, 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[2]  H. Jin Kim,et al.  Estimation, Control, and Planning for Autonomous Aerial Transportation , 2017, IEEE Transactions on Industrial Electronics.

[3]  Matko Orsag,et al.  Towards valve turning using a dual-arm aerial manipulator , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  Hyungbo Shim,et al.  Robust Control of an Equipment-Added Multirotor Using Disturbance Observer , 2018, IEEE Transactions on Control Systems Technology.

[5]  Hyungbo Shim,et al.  Robust Tracking and Vibration Suppression for a Two-Inertia System by Combining Backstepping Approach With Disturbance Observer , 2010, IEEE Transactions on Industrial Electronics.

[6]  H. Jin Kim,et al.  Sampling-based Motion Planning for Aerial Pick-and-Place , 2019, 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[7]  H. Jin Kim,et al.  Aerial Manipulation using Model Predictive Control for Opening a Hinged Door , 2020, 2020 IEEE International Conference on Robotics and Automation (ICRA).

[8]  Rita Cunha,et al.  Robust Landing and Sliding Maneuver Hybrid Controller for a Quadrotor Vehicle , 2016, IEEE Transactions on Control Systems Technology.

[9]  Seungwon Choi,et al.  Aerial manipulation using a quadrotor with a two DOF robotic arm , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  Roland Siegwart,et al.  Hybrid predictive control for aerial robotic physical interaction towards inspection operations , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[11]  J. Braga,et al.  Aerial manipulator for structure inspection by contact from the underside , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[12]  Lorenzo Marconi,et al.  A control framework for robust practical tracking of hybrid automata , 2009, Proceedings of the 48h IEEE Conference on Decision and Control (CDC) held jointly with 2009 28th Chinese Control Conference.

[13]  Hyungbo Shim,et al.  An Inner-Loop Controller Guaranteeing Robust Transient Performance for Uncertain MIMO Nonlinear Systems , 2009, IEEE Transactions on Automatic Control.

[14]  Suseong Kim,et al.  Operating an unknown drawer using an aerial manipulator , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[15]  L. Marconi,et al.  Control of Aerial Robots: Hybrid Force and Position Feedback for a Ducted Fan , 2012, IEEE Control Systems.

[16]  Inkyu Jang,et al.  Aerial Manipulator Pushing a Movable Structure Using a DOB-Based Robust Controller , 2021, IEEE Robotics and Automation Letters.

[17]  R. Sanfelice,et al.  Hybrid dynamical systems , 2009, IEEE Control Systems.

[18]  Stefano Stramigioli,et al.  Interaction control of an UAV endowed with a manipulator , 2013, 2013 IEEE International Conference on Robotics and Automation.