Plasma-polymerized coatings for bio-MEMS applications

Coatings that provide either hydrophobic, hydrophilic, cell adhesive or cell non-adhesive functionalities have been deposited using three-phase low energy plasma-polymerization. The cell adhesive/non-adhesive coatings were tested using E. coli k-12. The four plasma-polymerized coatings are: para-xylene (PX), 1-vinyl-2-pyrrolidinone (VP), polyvinyldifluoride (PVDF) and phosphorous glass (SiPOC), respectively. In addition, micropatterning of PX and VP has been performed on the same silicon substrate. Feature sizes down to 2 μm and precise alignment were obtained using lift-off and cleanroom photolithography techniques. The patterning process used did not influence the wetability of the coatings. The simplicity of the lift-off technique and the sturdiness and versatility of the plasma-polymerized coatings, make this ideal for MEMS, bio-MEMS and microfluidic applications, where patterned surfaces with different functionalities are required on for instance the same microchip.

[1]  K E Healy,et al.  Surfaces designed to control the projected area and shape of individual cells. , 1999, Journal of biomechanical engineering.

[2]  Hiroyuki Fujita,et al.  A Silicon Shadow Mask with Unlimited Patterns and a Mechanical Alignment Structure by Al-Delay Masking Process , 2000 .

[3]  R. Timmons,et al.  Pulsed‐plasma polymerization of 1‐vinyl‐2‐pyrrolidone: Synthesis of a linear polymer , 1998 .

[4]  D E Ingber,et al.  Using microcontact printing to pattern the attachment of mammalian cells to self-assembled monolayers of alkanethiolates on transparent films of gold and silver. , 1997, Experimental cell research.

[5]  D A. Dunn,et al.  Challenges and solutions to ultra-high-throughput screening assay miniaturization: submicroliter fluid handling. , 2000, Drug discovery today.

[6]  Darren Jones,et al.  Selective hydrophobic and hydrophilic texturing of surfaces using photolithographic photodeposition of polymers , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[7]  Carlos H. Mastrangelo,et al.  MICROFABRICATED PLASTIC CAPILLARY SYSTEMS WITH PHOTO-DEFINABLE HYDROPHILIC AND HYDROPHOBIC REGIONS , 1999 .

[8]  J. Wölcke,et al.  Miniaturized HTS technologies - uHTS. , 2001, Drug discovery today.

[9]  R. Marchant,et al.  Preparation and characterization of plasma‐polymerized N‐vinyl‐2‐pyrrolidone films , 1989 .

[10]  George M. Whitesides,et al.  Patterning Self-Assembled Monolayers: Applications in Materials Science , 1994 .

[11]  D. D. Denton,et al.  Micromachining of non-fouling coatings for bio-MEMS applications , 2001 .

[12]  S. Sze.  Semiconductor Devices: Physics and Technology , 1985 .

[13]  D. D. Denton,et al.  A precision technology for controlling protein adsorption and cell adhesion in bioMEMS , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[14]  S A Sundberg,et al.  High-throughput and ultra-high-throughput screening: solution- and cell-based approaches. , 2000, Current opinion in biotechnology.

[15]  F. Dickert,et al.  Nano- and micro-structuring of sensor materials—from molecule to cell detection , 2003 .

[16]  J. Anderson,et al.  A hydrophilic plasma polymerized film composite with potential application as an interface for biomaterials. , 1990, Journal of biomedical materials research.

[17]  B. Améduri,et al.  Photochemical induced polymerization of vinylidene fluoride (VDF) with hydrogen peroxide to obtain original telechelic PVDF , 2002 .

[18]  H. Fujita,et al.  A silicon shadow mask for deposition on isolated areas , 2000 .

[19]  D. Beebe,et al.  Principles of surface-directed liquid flow in microfluidic channels. , 2002, Analytical chemistry.