Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers

In this study, CFD calculations were made in order to analyse the thermal behaviour of yoghurt in a plate heat exchanger, the yoghurt viscosity being described by a Herschel–Bulkley model. The influence of Reynolds number on local Nusselt numbers was analysed as well as the influence of entry effects on average Nusselt number. Numerical runs considering and discarding the influence of temperature on the viscosity were performed and the impact on average Nusselt numbers was analysed. Transversal variations of viscosity were studied and thermal correlations including the ratio between bulk and wall viscosities are proposed. The obtained thermal correlations were compared with the experimental ones (described in the literature) and a very good agreement was found, mainly when considering the effect of temperature on viscosity. Simulations with a non-Newtonian fluid having lower Prandtl numbers than yoghurt were performed in order to analyse the influence of this variation on the Reynolds number exponent of the thermal correlation. 2005 Published by Elsevier Ltd.

[1]  S. Kakaç,et al.  Heat Exchangers: Selection, Rating, and Thermal Design , 1997 .

[2]  J. Ding,et al.  Laminar flow heat transfer to viscous powerlaw fluids in double-sine ducts , 1997 .

[3]  M. Collins,et al.  Investigation of flow and heat transfer in corrugated passages—I. Experimental results , 1996 .

[4]  Marcus Reppich.  Use of high performance plate heat exchangers in chemical and process industries , 1999 .

[5]  H. Martin,et al.  Flow distribution and pressure drop in plate heat exchangers—II Z-type arrangement , 1984 .

[6]  Luís F. Melo,et al.  Heat transfer and rheology of stirred yoghurt during cooling in plate heat exchangers , 2003 .

[7]  R. M. Manglik,et al.  Enhanced heat transfer due to curvature-induced lateral vortices in laminar flows in sinusoidal corrugated-plate channels , 2004 .

[8]  M. Collins,et al.  Investigation of flow and heat transfer in corrugated passages—II. Numerical simulations , 1996 .

[9]  Joao Maia,et al.  Rheological monitoring of structure evolution and development in stirred yoghurt , 1999 .

[10]  Jorge Andrey Wilhelms Gut,et al.  Modeling of plate heat exchangers with generalized configurations , 2003 .

[11]  James Freeman Steffe,et al.  Rheological Methods in Food Process Engineering , 1992 .

[12]  Jorge Andrey Wilhelms Gut,et al.  Selecting Optimal Configurations for Multisection Plate Heat Exchangers in Pasteurization Processes , 2003 .

[13]  J.-C. Leuliet,et al.  Écoulements et transferts de chaleur dans les Échangeurs à plaques traitant des produits visqueux newtoniens et pseudoplastiques 1. Modélisation des variations du diamètre hydraulique , 1990 .

[14]  J. C. Leuliet,et al.  Generalized Reynolds number for the flow of power law fluids in cylindrical ducts of arbitrary cross , 1995 .

[15]  R Poulter,et al.  Hydrodynamics and thermal characteristics of corrugated channels: computational approach , 2000 .

[16]  G. Antonini,et al.  Corrélations transfert/facteur de frottement pour le chauffage/refroidissement d'un fluide visqueux à forte dépendance thermorhéologique en écoulement de conduite en régime laminaire , 1987 .

[17]  T. Kho,et al.  An Experimental and Numerical Investigation of Heat Transfer Fouling and Fluid Flow in Flat Plate Heat Exchangers , 1999 .

[18]  João M. Nóbrega,et al.  Simulation of stirred yoghurt processing in plate heat exchangers , 2005 .