论文信息 - High numerical aperture imaging by using multimode fibers with micro-fabricated optics

High numerical aperture imaging by using multimode fibers with micro-fabricated optics

Controlling light propagation into multimode optical fibers through spatial light modulators provides highly miniaturized endoscopes and optical micromanipulation probes. We increase the numerical aperture up to nearly 1 by micro-optics fabricated on the fiber-end.

[1] Silvio Bianchi,et al. A multi-mode fiber probe for holographic micromanipulation and microscopy. , 2012, Lab on a chip.

[2] F. De Angelis,et al. Micro-Optics Fabrication on Top of Optical Fibers Using Two-Photon Lithography , 2010, IEEE Photonics Technology Letters.

[3] Demetri Psaltis,et al. High-resolution, lensless endoscope based on digital scanning through a multimode optical fiber , 2013, Biomedical optics express.

[4] R Di Leonardo,et al. Focusing and imaging with increased numerical apertures through multimode fibers with micro-fabricated optics. , 2013, Optics letters.

[5] Demetri Psaltis,et al. Increasing the imaging capabilities of multimode fibers by exploiting the properties of highly scattering media. , 2013, Optics letters.

[6] Silvio Bianchi,et al. Hologram transmission through multi-mode optical fibers. , 2011, Optics express.

[7] F. Bragheri,et al. Integrated microfluidic device for single-cell trapping and spectroscopy , 2013, Scientific Reports.

[8] Ruo Yu Gu,et al. Resolution limits for imaging through multi-mode fiber. , 2013, Optics express.