9.0% power conversion efficiency from ternary all-polymer solar cells

Integration of a third component into a single-junction polymer solar cell (PSC) is regarded as an attractive strategy to enhance the performance of PSCs. Although binary all-polymer solar cells (all-PSCs) have recently emerged with compelling power conversion efficiencies (PCEs), the PCEs of ternary all-PSCs still lag behind those of the state-of-the-art binary all-PSCs, and the advantages of ternary systems are not fully exploited. In this work, we realize high-performance ternary all-PSCs with record-breaking PCEs of 9% and high fill factors (FF) of over 0.7 for both conventional and inverted devices. The improved photovoltaic performance benefits from the synergistic effects of extended absorption, more efficient charge generation, optimal polymer orientations and suppressed recombination losses compared to the binary all-PSCs, as evidenced by a set of experimental techniques. The results provide new insights for developing high-performance ternary all-PSCs by choosing appropriate donor and acceptor polymers to overcome limitations in absorption, by affording good miscibility, and by benefiting from charge and energy transfer mechanisms for efficient charge generation.

[1]  Jianqi Zhang,et al.  Synergistic Effect of Polymer and Small Molecules for High‐Performance Ternary Organic Solar Cells , 2015, Advanced materials.

[2]  Wei Chen,et al.  High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes , 2015, Nature Communications.

[3]  Yongfang Li,et al.  High‐Efficiency Nonfullerene Polymer Solar Cells with Medium Bandgap Polymer Donor and Narrow Bandgap Organic Semiconductor Acceptor , 2016, Advanced materials.

[4]  Jianqi Zhang,et al.  Combining Energy Transfer and Optimized Morphology for Highly Efficient Ternary Polymer Solar Cells , 2017 .

[5]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[6]  Bumjoon J. Kim,et al.  From Fullerene-Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control. , 2016, Accounts of chemical research.

[7]  Zhishan Bo,et al.  Ternary‐Blend Polymer Solar Cells Combining Fullerene and Nonfullerene Acceptors to Synergistically Boost the Photovoltaic Performance , 2016, Advanced materials.

[8]  Yuguang Ma,et al.  Efficient Ternary Organic Solar Cells with High Composition Tolerance via Integrated Near-IR Sensitization and Interface Engineering , 2016 .

[9]  Gregory C. Welch,et al.  Key components to the recent performance increases of solution processed non-fullerene small molecule acceptors , 2015 .

[10]  Christoph J. Brabec,et al.  Organic Ternary Solar Cells: A Review , 2013, Advanced materials.

[11]  Wei You,et al.  Organic Solar Cells beyond One Pair of Donor-Acceptor: Ternary Blends and More. , 2013, The journal of physical chemistry letters.

[12]  O. Inganäs,et al.  High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing. , 2016, Journal of the American Chemical Society.

[13]  S. Jenekhe,et al.  Ternary blend all-polymer solar cells: enhanced performance and evidence of parallel-like bulk heterojunction mechanism , 2015 .

[14]  Yang Yang,et al.  High-performance multiple-donor bulk heterojunction solar cells , 2015, Nature Photonics.

[15]  Samson A Jenekhe,et al.  7.7% Efficient All‐Polymer Solar Cells , 2015, Advanced materials.

[16]  Mikkel Jørgensen,et al.  Making Ends Meet: Flow Synthesis as the Answer to Reproducible High‐Performance Conjugated Polymers on the Scale that Roll‐to‐Roll Processing Demands , 2015 .

[17]  Wei Li,et al.  Electrochemical Considerations for Determining Absolute Frontier Orbital Energy Levels of Conjugated Polymers for Solar Cell Applications , 2011, Advanced materials.

[18]  Christopher R. McNeill,et al.  Morphology of all-polymer solar cells , 2012 .

[19]  Yanming Sun,et al.  Ternary Organic Solar Cells Based on Two Highly Efficient Polymer Donors with Enhanced Power Conversion Efficiency , 2016 .

[20]  M. Wienk,et al.  Quantifying Bimolecular Recombination Losses in Organic Bulk Heterojunction Solar Cells , 2011, Advanced materials.

[21]  Fei Huang,et al.  Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9% , 2017 .

[22]  A. Heeger,et al.  Investigation of Charge Carrier Behavior in High Performance Ternary Blend Polymer Solar Cells , 2016 .

[23]  Callie W. Babbitt,et al.  Material and energy intensity of fullerene production. , 2011, Environmental science & technology.

[24]  Jean-Luc Brédas,et al.  Charge transport in organic semiconductors. , 2007, Chemical reviews.

[25]  Antonio Facchetti,et al.  Polymer donor–polymer acceptor (all-polymer) solar cells , 2013 .

[26]  Markus Hösel,et al.  Solar cells with one-day energy payback for the factories of the future , 2012 .

[27]  Fujun Zhang,et al.  Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells , 2016, Advanced materials.

[28]  D. Ginger,et al.  Photoinduced Hole Transfer Becomes Suppressed with Diminished Driving Force in Polymer‐Fullerene Solar Cells While Electron Transfer Remains Active , 2013 .

[29]  M. Ratner,et al.  The Scope and Limitations of Ternary Blend Organic Photovoltaics , 2015 .

[30]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[31]  Philippe Blanchard,et al.  Molecular Materials for Organic Photovoltaics: Small is Beautiful , 2014, Advanced materials.

[32]  Suchol Savagatrup,et al.  Mechanical Properties of Organic Semiconductors for Stretchable, Highly Flexible, and Mechanically Robust Electronics. , 2017, Chemical reviews.

[33]  R. Street,et al.  Influence of polymer compatibility on the open-circuit voltage in ternary blend bulk heterojunction solar cells. , 2014, ACS applied materials & interfaces.

[34]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[35]  Huajun Xu,et al.  High-performance ternary blend all-polymer solar cells with complementary absorption bands from visible to near-infrared wavelengths , 2016 .

[36]  C. B. Nielsen,et al.  Non-Fullerene Electron Acceptors for Use in Organic Solar Cells , 2015, Accounts of chemical research.

[37]  H. Ade,et al.  A Vinylene‐Bridged Perylenediimide‐Based Polymeric Acceptor Enabling Efficient All‐Polymer Solar Cells Processed under Ambient Conditions , 2016, Advanced materials.

[38]  Yongfang Li,et al.  High Efficiency Ternary Nonfullerene Polymer Solar Cells with Two Polymer Donors and an Organic Semiconductor Acceptor , 2017 .

[39]  Jianqi Zhang,et al.  Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells. , 2015, Journal of the American Chemical Society.

[40]  Cheng Wang,et al.  Flexible, highly efficient all-polymer solar cells , 2015, Nature Communications.

[41]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[42]  Wei Ma,et al.  High Bandgap (1.9 eV) Polymer with Over 8% Efficiency in Bulk Heterojunction Solar Cells , 2016 .

[43]  Huajun Xu,et al.  Interface Engineering for Ternary Blend Polymer Solar Cells with a Heterostructured Near‐IR Dye , 2015, Advanced materials.

[44]  A. Heeger,et al.  25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation , 2014, Advanced materials.

[45]  Xiaoniu Yang,et al.  Improved Thermal Stability of Polymer Solar Cells by Incorporating Porphyrins , 2015 .

[46]  Jun Li,et al.  Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer , 2015 .

[47]  Jianhui Hou,et al.  Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency , 2017, Advanced materials.

[48]  Chain‐Shu Hsu,et al.  Applications of functional fullerene materials in polymer solar cells , 2014 .

[49]  Yongfang Li,et al.  Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material , 2016 .

[50]  Jianqi Zhang,et al.  All‐Polymer Solar Cells Based on Absorption‐Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27% , 2016, Advanced materials.

[51]  Yanchun Han,et al.  Optimized domain size and enlarged D/A interface by tuning intermolecular interaction in all‐polymer ternary solar cells , 2016 .

[52]  Alan J. Heeger,et al.  Recombination in polymer-fullerene bulk heterojunction solar cells , 2010 .

[53]  Christoph J. Brabec,et al.  High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency , 2017 .

[54]  F. Liu,et al.  Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10% , 2016, Advanced materials.

[55]  Fujun Zhang,et al.  Versatile ternary organic solar cells: a critical review , 2016 .

[56]  Ergang Wang,et al.  A dual ternary system for highly efficient ITO-free inverted polymer solar cells , 2015 .

[57]  Hao Li,et al.  Optimized Temperature Effect of Li‐Ion Diffusion with Layer Distance in Li(NixMnyCoz)O2 Cathode Materials for High Performance Li‐Ion Battery , 2016 .

[58]  Daisuke Mori,et al.  Recent research progress of polymer donor/polymer acceptor blend solar cells , 2016 .

[59]  N. S. Sariciftci,et al.  Systematic Investigation of Porphyrin‐Thiophene Conjugates for Ternary Bulk Heterojunction Solar Cells , 2016 .

[60]  Wei You,et al.  Status and prospects for ternary organic photovoltaics , 2015, Nature Photonics.

[61]  Zhaojun Li,et al.  High‐Performance and Stable All‐Polymer Solar Cells Using Donor and Acceptor Polymers with Complementary Absorption , 2017 .

[62]  G. Sauvé,et al.  Beyond Fullerenes: Designing Alternative Molecular Electron Acceptors for Solution-Processable Bulk Heterojunction Organic Photovoltaics. , 2015, The journal of physical chemistry letters.

[63]  Jean-Luc Brédas,et al.  Thieno[3,4-c]pyrrole-4,6-dione-3,4-difluorothiophene Polymer Acceptors for Efficient All-Polymer Bulk Heterojunction Solar Cells. , 2016, Angewandte Chemie.

[64]  Mats Andersson,et al.  High-photovoltage all-polymer solar cells based on a diketopyrrolopyrrole-isoindigo acceptor polymer , 2017 .